| 臺大學術典藏 |
2019-11-27T02:02:16Z |
Refine microstructure of solder materials via minor element additions
|
C. ROBERT KAO;Kao C.R.;Yang T.L.;Yu J.J.;Chung C.K.; Chung C.K.; Yu J.J.; Yang T.L.; Kao C.R.; C. ROBERT KAO |
| 臺大學術典藏 |
2019-11-27T02:02:15Z |
Effect of Ag concentration on small solder volume Ni/SnAg/Ni system
|
C. ROBERT KAO;Kao C.R.;Chung C.K.;Yang S.;Yu J.J.; Yu J.J.; Yang S.; Chung C.K.; Kao C.R.; C. ROBERT KAO |
| 國立成功大學 |
2016-06 |
Rapid prototyping of biodegradable microneedle arrays by integrating CO2 laser processing and polymer molding
|
Tu, K. T.; Chung, C. K. |
| 國立成功大學 |
2015-04 |
Effect of oxalic acid concentration on the magnetically enhanced capacitance and resistance of AAO humidity sensor
|
Chung, C. K.; Khor, O. K.; Syu, C. J.; Chen, S. W. |
| 國立成功大學 |
2014-10 |
Simulation and fabrication of a branch-channel rhombic micromixer for low pressure drop and short mixing length
|
Chung, C. K.; Chang, C. K.; Lai, C. C. |
| 國立成功大學 |
2014-10 |
Fabrication of porous anodic aluminum oxide by hybrid pulse anodization at relatively high potential
|
Chung, C. K.; Liao, M. W.; Khor, O. K. |
| 國立成功大學 |
2014-10 |
Application of metal film protection to microfluidic chip fabrication using CO2 laser ablation
|
Chung, C. K.; Tu, K. Z. |
| 國立成功大學 |
2014-08-01 |
Growth of porous anodized alumina on the sputtered aluminum films with 2D-3D morphology for high specific surface area
|
Liao, M. W.; Chung, C. K. |
| 國立成功大學 |
2014-08 |
Sensitivity evolution and enhancement mechanism of porous anodic aluminum oxide humidity sensor using magnetic field
|
Chen, S. W.; Khor, O. K.; Liao, M. W.; Chung, C. K. |
| 國立成功大學 |
2013-11 |
Fabrication and simulation of glass micromachining using CO2 laser processing with PDMS protection
|
Chung, C. K.; Lin, S. L.; Wang, H. Y.; Tan, T. K.; Tu, K. Z.; Lung, H. F. |
| 國立成功大學 |
2013-10-15 |
Effect of solution contents on the evolution of microstructure and photoluminescence of laser-annealed rutile TiO2 thin films
|
Chung, C. K.; Chuang, K. P.; Cheng, S. Y.; Lin, S. L.; Hsie, K. Y. |
| 國立成功大學 |
2013-10-01 |
Enhancement of pore size distribution in one-step hybrid pulse anodization of aluminum thin films sputtered on Si substrates
|
Chung, C. K.; Liao, M. W.; Khor, O. K.; Chang, H. C. |
| 國立成功大學 |
2013-10 |
Simulation and fabrication of capillary-driven meander micromixer for short-distance mixing
|
Chung, C. -K.; Lai, C. C; Shih, T. R.; Chang, E. C.; Chen, S. W. |
| 國立成功大學 |
2013-10 |
Fabrication of copper nanowires using overpotential electrodeposition and anodic aluminium oxide template
|
Chung, C-K; Yang, C. Y.; Liao, M. W.; Li, S. L. |
| 國立成功大學 |
2013-09-15 |
Effect of underlying silicon layer on microstructure and photoluminescence of rapid-thermal-annealed carbon and C/Si nanofilms
|
Chung, C. K.; Lai, C. W.; Wu, B. H. |
| 國立成功大學 |
2013-09 |
The role and effect of residual stress on pore generation during anodization of aluminium thin films
|
Liao, M. W.; Chung, C. K. |
| 國立成功大學 |
2013-03 |
Fabrication of flexible light guide plate using CO2 laser LIGA-like technology
|
Chung, C. K.; Syu, Y. J.; Wang, H. Y.; Cheng, C. C.; Lin, S. L.; Tu, K. Z. |
| 國立成功大學 |
2013-03 |
Numerical simulation of the capillary flow in the meander microchannel
|
Lai, C. C.; Chung, C. K. |
| 國立成功大學 |
2013-03 |
On characteristics of pore size distribution in hybrid pulse anodized high-aspect-ratio aluminum oxide with Taguchi method
|
Chung, C. K.; Liao, M. W.; Chang, H. C.; Chang, W. T.; Liu, T. Y. |
| 國立成功大學 |
2012-12-01 |
Improvement of pore distribution uniformity of nanoporous anodic aluminum oxide with pulse reverse voltage on low-and-high-purity aluminum foils
|
Chung, C. K.; Chang, W. T.; Liao, M. W.; Chang, H. C. |
| 國立成功大學 |
2012-10-05 |
Evolution of enhanced crystallinity and mechanical property of nanocomposite Ti-Si-N thin films using magnetron reactive co-sputtering
|
Chung, C. K.; Chang, H. C.; Chang, S. C.; Liao, M. W.; Lai, C. C. |
| 國立成功大學 |
2012-08 |
Fabrication and property of titanium dioxide thin film using sol-gel method and CO2 laser annealing
|
Chung, C. -K.; Lin, S. L.; Chuang, K. P.; Cheng, S. Y.; Shei, K. Y. |
| 國立成功大學 |
2012-08 |
Fabrication of sub-spot-size microchannel of microfluidic chip using CO2 laser processing with metal-film protection
|
Chung, C. K.; Tan, T. K.; Lin, S. L.; Tu, K. Z.; Lai, C. C. |
| 國立成功大學 |
2012-06-25 |
Nano silicon top-layer for composite-induced multiphasic enhancement of thermal stability of hardness of diamond-like carbon nanofilm at 900 degrees C
|
Chung, C. K.; Wu, B. H.; Lai, C. W.; Chen, T. Y. |
| 國立成功大學 |
2011-10 |
Low-temperature formation of nanocrystalline SiC particles and composite from three-layer Si/C/Si film for the novel enhanced white photoluminescence
|
Chung, C. K.; Chen, T. Y.; Lai, C. W. |
| 國立成功大學 |
2011-07-15 |
Fabrication of enhanced anodic aluminum oxide performance at room temperatures using hybrid pulse anodization with effective cooling
|
Chung, C. K.; Chang, W. T.; Liao, M. W.; Chang, H. C.; Lee, C. T. |
| 國立成功大學 |
2011-07 |
Effect of sol-gel composition ratio and laser power on phase transformation of crystalline titanium dioxide under CO(2) laser annealing
|
Chung, C. K.; Lin, S. L.; Cheng, S. Y.; Chuang, K. P.; Wang, H. Y. |
| 國立成功大學 |
2011-06 |
On the fabrication of minimizing bulges and reducing the feature dimensions of microchannels using novel CO(2) laser micromachining
|
Chung, C. K.; Lin, S. L. |
| 國立成功大學 |
2011-05-31 |
Effect of pulse voltage and aluminum purity on the characteristics of anodic aluminum oxide using hybrid pulse anodization at room temperature
|
Chung, C. K.; Chang, W. T.; Liao, M. W.; Chang, H. C. |
| 國立成功大學 |
2011-05-31 |
Effect of reactive gases flow ratios on the microstructure and electrical resistivity of Ta-N-O thin films by reactive co-sputtering
|
Chung, C. K.; Chen, T. S.; Chang, N. W. |
| 國立成功大學 |
2011-04-01 |
Design and experiments of a short-mixing-length baffled microreactor and its application to microfluidic synthesis of nanoparticles
|
Chung, C. K.; Shih, T. R.; Chang, C. K.; Lai, C. W.; Wu, B. H. |
| 國立成功大學 |
2011-02-15 |
Effect of temperature on the evolution of diffusivity, microstructure and hardness of nanocrystalline nickel films electrodeposited at low temperatures
|
Chung, C. K.; Chang, W. T.; Chen, C. F.; Liao, M. W. |
| 國立成功大學 |
2011-01-31 |
On work function and characteristics of anomalous electrodeposited nickel-cobalt films
|
Chung, C. K.; Chang, W. T.; Liao, M. W. |
| 國立臺灣大學 |
2011 |
The orientation relationship between Ni and Cu6Sn5 formed during the soldering reaction
|
Chen, W.M.; Yang, T.L.; Chung, C.K.; Kao, C.R. |
| 國立成功大學 |
2007-06-12 |
Fabrication of wedge-shape tool via electrochemical micromachining with diamond-like carbon coating
|
Wang, Jiunn-Jyh Junz; Chung, C. K.; Wu, Bo-Hsiung; Liao, Yong-Yuan |
| 國立臺灣科技大學 |
2005 |
Fabrication and characterization of amorphous Si films by PECVD for MEMS
|
Chung, C.K.;Tsai, M.Q.;Tsai, P.H.;Lee, C. |
