| 國立成功大學 |
2017-08-28 |
Thermodynamic Analysis on the Formation of Anodic Aluminum Oxide Using Averaged Moving Approximate Entropy
|
Chen, Cheng-Hui; Chen, Chia-Chern; Chung, Chen-Kuei |
| 國立成功大學 |
2016-08 |
Surface quality, microstructure, mechanical properties and tribological results of the SKD 61 tool steel with prior heat treatment affected by the deposited energy of continuous wave laser micro-polishing
|
Chang, Chang-Shuo; Chung, Chen-Kuei; Lin, Jen-Fin |
| 國立成功大學 |
2016-07-15 |
Method for dye-free coloring of one-time anodic aluminum oxide surface
|
Chung, Chen-Kuei;Liao, Ming-Wei;Chu, Bo-Yu;Liao, Shu-Hsien;Chen, Cheng-Hui |
| 國立成功大學 |
2016-02 |
Effects of annealing temperature on microstructure, surface roughness, mechanical and tribological properties of Ni-P and Ni-P/SiC films
|
Chang, Chang-Shuo; Hou, Kung-Hsu; Ger, Ming-Der; Chung, Chen-Kuei; Lin, Jen-Fin |
| 國立成功大學 |
2014-10 |
Selective patterning of indium tin oxide films using 1064 nm laser for microparts processing
|
Chung, Chen-Kuei; Tu, Kun-Tse |
| 國立成功大學 |
2014 |
Microfluidic chip for plasma separation from undiluted human whole blood samples using low voltage contactless dielectrophoresis and capillary force
|
Chen, Chia-Chern; Lin, Po-Hsiu; Chung, Chen-Kuei |
| 國立成功大學 |
2013-09-11 |
Substrate having a mark formed on a surface thereof by a CO2 laser beam
|
Chung,Chen-Kuei; Wu,Meng-Yu; Hsiao,En-Jou; Lin,Shih-Lung |
| 國立成功大學 |
2012-04 |
One-step hybrid pulse anodization for nanoporous anodic aluminum oxide synthesis of aluminum thin films sputtered on Si(100) substrate
|
Chung, Chen-Kuei; Liao, Ming-We; Khor, Ooi-Kiat; Chang, Hao-Chin |
| 國立成功大學 |
2012-03 |
Study of Phase Transformation of Rapid-Thermal-Annealed TiOx Films and Their Photo-Induced Hydrophilicity
|
Chung, Chen-Kuei; Liao, Ming-Wei |
| 國立成功大學 |
2011-09 |
Effects of Al film thickness and annealing temperature on the aluminum-induced crystallization of amorphous silicon and carrier mobility
|
Peng, Cheng-Chang; Chung, Chen-Kuei; Lin, Jen-Fin |
| 國立成功大學 |
2011-09 |
Microstructure-induced novel white photoluminescence from rapid-thermal-annealed two-layer Si/C on Si(1 0 0) with nanocomposite Si, SiC and C nanocrystals
|
Chung, Chen-Kuei; Chen, Yuan-Fang; Lai, Chun-Wen |
| 國立成功大學 |
2011-07-18 |
Method for manufacturing a flexible optical plate, product and backlight module made therewith
|
CHUNG, CHEN-KUEI;SYU, YUAN-JIE;SHER, KUN-LIN;CHENG, CHIH-CHING;LIN, SHIH-LUNG |
| 國立成功大學 |
2011-07-18 |
Method for manufacturing a flexible optical plate, product and backlight module made therewith
|
CHUNG, CHEN-KUEI;SYU, YUAN-JIE;SHER, KUN-LIN;CHENG, CHIH-CHING;LIN, SHIH-LUNG |
| 國立成功大學 |
2011-07-18 |
Method for manufacturing a flexible optical plate, product and backlight module made therewith
|
CHUNG, CHEN-KUEI;SYU, YUAN-JIE;SHER, KUN-LIN;CHENG, CHIH-CHING;LIN, SHIH-LUNG |
| 國立成功大學 |
2011-06-25 |
Effects of annealing conditions and thickness ratio of Si/Al films on the Hall carrier mobility, Al carrier concentration, and nanovoids formed in the metal-induced Si crystallization of Si/Al/Si/SiO2/glass specimens
|
Peng, Cheng Chang; Chung, Chen Kuei; Wu, Bo Hsiung; Weng, Min Hang; Huang, Chil Chieh; Lin, Jeri Fin |
| 國立成功大學 |
2010-07 |
Effect of Substrate Temperature on the In-Situ Formation of Crystalline SiC Nanostructured Film Using Ultra-High-Vacuum Ion Beam Sputtering
|
Chung, Chen-Kuei; Wu, B. H. |
| 國立成功大學 |
2010-04 |
Effect of nonionic surfactant addition on Pyrex glass ablation using water-assisted CO2 laser processing
|
Chung, Chen-Kuei; Liao, M. W.; Lin, S. L. |
| 國立成功大學 |
2010-02 |
Water-assisted CO2 laser ablated glass and modified thermal bonding for capillary-driven bio-fluidic application
|
Chung, Chen-Kuei; Chang, H. C.; Shih, T. R.; Lin, S. L.; Hsiao, E. J.; Chen, Y. S.; Chang, E. C.; Chen, C. C.; Lin, C. C. |
| 國立成功大學 |
2010-01-05 |
Fabrication of cone-like microstructure using UV LIGA-like for light guide plate application
|
Chung, Chen-Kuei; Sher, K. L.; Syu, Y. J.; Cheng, C. C. |
| 國立成功大學 |
2009-12-31 |
Effects of oxygen flow ratios and annealing temperatures on Raman and photoluminescence of titanium oxide thin films deposited by reactive magnetron sputtering
|
Chung, Chen-Kuei; Liao, M. W.; Lai, C. W. |
| 國立成功大學 |
2009-12-25 |
Effect of the target shuttering on the characteristics of the Ta-Si-N thin films by reactive magnetron co-sputtering
|
Chung, Chen-Kuei; Chen, T. S.; Nautiyal, A.; Chang, N. W.; Hung, S. T. |
| 國立成功大學 |
2009-12-25 |
Effect of microstructure on the mechanical properties of carbon nanofilms deposited on the Si(100) at high temperature under ultra high vacuum
|
Chung, Chen-Kuei; Hung, S. T.; Lai, C. W. |
| 國立成功大學 |
2009-12-18 |
Design and mixing efficiency of rhombic micromixer with flat angles
|
Chung, Chen-Kuei; Shih, T. R.; Wu, B. H.; Chang, C. K. |
| 國立成功大學 |
2009-12 |
Characterization and patterning of novel high-TCR Ta-Si-N thin films for sensor application
|
Chung, Chen-Kuei; Chang, Y. L.; Wu, J. C.; Jhu, J. J.; Chen, T. S. |
| 國立成功大學 |
2009-11-29 |
Electroplating of nickel films at ultra low electrolytic temperature
|
Chung, Chen-Kuei; Chang, W. T.; Hung, S. T. |
| 國立成功大學 |
2009-11-15 |
Effect of underlying silicon film on the evolution of microstructure and hardness of the high-temperature annealed carbon film on Si substrate
|
Chung, Chen-Kuei; Wu, Bo-Hsiung |
| 國立成功大學 |
2009-11-06 |
Effect of oxalic acid concentration on the formation of anodic aluminum oxide using pulse anodization at room temperature
|
Chung, Chen-Kuei; Liu. T. Y.; Chang, W. T. |
| 國立成功大學 |
2009-08-31 |
Thickness effect on the formation of SiC nanoparticles in sandwiched Si/C/Si and C/Si multilayers
|
Chung, Chen-Kuei; Wu, Bo-Hsiung; Chen, T. S.; Peng, C. C.; Lai, C. W. |
| 國立成功大學 |
2009-07-01 |
Effect of pulse frequency and current density on anomalous composition and nanomechanical property of electrodeposited Ni-Co films
|
Chung, Chen-Kuei; Chang, W. T. |
| 國立成功大學 |
2009-07 |
Effect of residual stress on nanoindented property of Si/C/Si multilayers
|
Wu, Bo-Hsiung; Chung, Chen-Kuei; Shih, Ting-Ruen; Peng, Cheng-Chang; Mohanty, Udit-Surya |
| 國立成功大學 |
2009-06 |
Fabrication and flow test of long-term hydrophilic fluidic chip without using any surface modification treatment
|
Chung, Chen-Kuei; Chen, Y. S.; Shih, T. R. |
| 國立成功大學 |
2009-04 |
Deep nickel metal deposition on multiscale feature sizes of a small hole and large sector cavities using electroforming
|
Chung, Chen-Kuei; Chang, Wei-Tse |
| 國立成功大學 |
2009-04 |
A new visible photoluminescence in the conducting Ta-Si-N nanocomposite thin films
|
Chung, Chen-Kuei; Chen, T. S. |
| 國立成功大學 |
2009-03 |
Crackless linear through-wafer etching of Pyrex glass using liquid-assisted CO2 laser processing
|
Chung, Chen-Kuei; Sung, Y. C.; Huang, G. R.; Hsiao, E. J.; Lin, W. H.; Lin, S. L. |
| 國立成功大學 |
2009-02-04 |
Hybrid pulse anodization for the fabrication of porous anodic alumina films from commercial purity (99%) aluminum at room temperature
|
Chung, Chen-Kuei; Zhou, R. X.; Liu, Te-Yu; Chang, W. T. |
| 國立成功大學 |
2009 |
Effect of Nitrogen Flow Ratios on the Microstructure and Properties of Ta-Al-N Thin Films by Reactive Cosputtering
|
Chung, Chen-Kuei; Chen, T. S. |
| 國立成功大學 |
2008-12-01 |
Raman inspection for the annealing induced evolution of sp(2) and sp(3) bonding behavior in sandwiched Si/C/Si multilayer
|
Chung, Chen-Kuei; Lai, C. W.; Peng, C. C.; Wu, Bo-Hsiung |
| 國立成功大學 |
2008-12-01 |
Formation of SiC nanoparticles of two-layer C/Si films on the Si substrate using thermal annealing
|
Chung, Chen-Kuei; Lai, C. W.; Peng, C. C.; Wu, Bo-Hsiung |
| 國立成功大學 |
2008-10 |
The anomalous behavior and properties of Ni-Co films codeposited in the sulfamate-chloride electrolyte
|
Chung, Chen-Kuei; Zhou, R. X.; Chang, W. T. |
| 國立成功大學 |
2008-10 |
Effect of baffle height and Reynolds number on fluid mixing
|
Chung, Chen-Kuei; Wu, C. Y.; Shih, T. R. |
| 國立成功大學 |
2008-10 |
Effect of cobalt content on the work function of the electrodeposited nickel-cobalt films
|
Chung, Chen-Kuei; Chang, W. T.; Zhou, R. X. |
| 國立成功大學 |
2008-10 |
Mixing behavior of the rhombic micromixers over a wide Reynolds number range using Taguchi method and 3D numerical simulations
|
Chung, Chen-Kuei; Shih, T. R.; Chen, T. C.; Wu, Bo-Hsiung |
| 國立成功大學 |
2008-09-21 |
Grain boundary scattering for temperature coefficient of resistance (TCR) behaviour of Ta-Si-N thin films
|
Chung, Chen-Kuei; Nautiyal, A.; Chen, T. S.; Chang, Y. L. |
| 國立成功大學 |
2008-08-13 |
Theoretical modeling developed to evaluate the hardness and reduced modulus for the C/a-Si composite film using nanoindentation tests
|
Han, Chang-Fu; Wu, Bo-Hsiung; Lin, Jen-Fin; Chung, Chen-Kuei |
| 國立成功大學 |
2008-08 |
A high-efficiency planar micromixer with convection and diffusion mixing over a wide Reynolds number range
|
Shih, T. R.; Chung, Chen-Kuei |
| 國立成功大學 |
2008-05 |
Effect of geometry on fluid mixing of the rhombic micromixers
|
Chung, Chen-Kuei; Shih, T. R. |
| 國立成功大學 |
2008-02 |
Effect of nitrogen flow ratio on the microstructure evolution and nanoindented mechanical property of the Ta-Si-N thin films
|
Chung, Chen-Kuei; Chen, T. S. |
| 國立成功大學 |
2007-12-15 |
Residual stress and hardness behaviors of the two-layer C/Si films
|
Chung, Chen-Kuei; Peng, C. C.; Wu, Bo-Hsiung; Chen, T. S. |
| 國立成功大學 |
2007-12 |
A rhombic micromixer with asymmetrical flow for enhancing mixing
|
Chung, Chen-Kuei; Shih, T. R. |
| 國立成功大學 |
2007-10 |
Effect of microstructures on the electrical and optoelectronic properties of nanocrystalline Ta-Si-N thin films by reactive magnetron cosputtering
|
Chung, Chen-Kuei; Chen, T. S. |
