| 國立成功大學 |
2009-11-15 |
Effect of underlying silicon film on the evolution of microstructure and hardness of the high-temperature annealed carbon film on Si substrate
|
Chung, Chen-Kuei; Wu, Bo-Hsiung |
| 國立成功大學 |
2009-11-06 |
Effect of oxalic acid concentration on the formation of anodic aluminum oxide using pulse anodization at room temperature
|
Chung, Chen-Kuei; Liu. T. Y.; Chang, W. T. |
| 國立成功大學 |
2009-08-31 |
Thickness effect on the formation of SiC nanoparticles in sandwiched Si/C/Si and C/Si multilayers
|
Chung, Chen-Kuei; Wu, Bo-Hsiung; Chen, T. S.; Peng, C. C.; Lai, C. W. |
| 國立成功大學 |
2009-07-01 |
Effect of pulse frequency and current density on anomalous composition and nanomechanical property of electrodeposited Ni-Co films
|
Chung, Chen-Kuei; Chang, W. T. |
| 國立成功大學 |
2009-07 |
Effect of residual stress on nanoindented property of Si/C/Si multilayers
|
Wu, Bo-Hsiung; Chung, Chen-Kuei; Shih, Ting-Ruen; Peng, Cheng-Chang; Mohanty, Udit-Surya |
| 國立成功大學 |
2009-06 |
Fabrication and flow test of long-term hydrophilic fluidic chip without using any surface modification treatment
|
Chung, Chen-Kuei; Chen, Y. S.; Shih, T. R. |
| 國立成功大學 |
2009-04 |
Deep nickel metal deposition on multiscale feature sizes of a small hole and large sector cavities using electroforming
|
Chung, Chen-Kuei; Chang, Wei-Tse |
| 國立成功大學 |
2009-04 |
A new visible photoluminescence in the conducting Ta-Si-N nanocomposite thin films
|
Chung, Chen-Kuei; Chen, T. S. |
| 國立成功大學 |
2009-03 |
Crackless linear through-wafer etching of Pyrex glass using liquid-assisted CO2 laser processing
|
Chung, Chen-Kuei; Sung, Y. C.; Huang, G. R.; Hsiao, E. J.; Lin, W. H.; Lin, S. L. |
| 國立成功大學 |
2009-02-04 |
Hybrid pulse anodization for the fabrication of porous anodic alumina films from commercial purity (99%) aluminum at room temperature
|
Chung, Chen-Kuei; Zhou, R. X.; Liu, Te-Yu; Chang, W. T. |
| 國立成功大學 |
2009 |
Effect of Nitrogen Flow Ratios on the Microstructure and Properties of Ta-Al-N Thin Films by Reactive Cosputtering
|
Chung, Chen-Kuei; Chen, T. S. |
| 國立成功大學 |
2008-12-01 |
Raman inspection for the annealing induced evolution of sp(2) and sp(3) bonding behavior in sandwiched Si/C/Si multilayer
|
Chung, Chen-Kuei; Lai, C. W.; Peng, C. C.; Wu, Bo-Hsiung |
| 國立成功大學 |
2008-12-01 |
Formation of SiC nanoparticles of two-layer C/Si films on the Si substrate using thermal annealing
|
Chung, Chen-Kuei; Lai, C. W.; Peng, C. C.; Wu, Bo-Hsiung |
| 國立成功大學 |
2008-10 |
The anomalous behavior and properties of Ni-Co films codeposited in the sulfamate-chloride electrolyte
|
Chung, Chen-Kuei; Zhou, R. X.; Chang, W. T. |
| 國立成功大學 |
2008-10 |
Effect of baffle height and Reynolds number on fluid mixing
|
Chung, Chen-Kuei; Wu, C. Y.; Shih, T. R. |
| 國立成功大學 |
2008-10 |
Effect of cobalt content on the work function of the electrodeposited nickel-cobalt films
|
Chung, Chen-Kuei; Chang, W. T.; Zhou, R. X. |
| 國立成功大學 |
2008-10 |
Mixing behavior of the rhombic micromixers over a wide Reynolds number range using Taguchi method and 3D numerical simulations
|
Chung, Chen-Kuei; Shih, T. R.; Chen, T. C.; Wu, Bo-Hsiung |
| 國立成功大學 |
2008-09-21 |
Grain boundary scattering for temperature coefficient of resistance (TCR) behaviour of Ta-Si-N thin films
|
Chung, Chen-Kuei; Nautiyal, A.; Chen, T. S.; Chang, Y. L. |
| 國立成功大學 |
2008-08-13 |
Theoretical modeling developed to evaluate the hardness and reduced modulus for the C/a-Si composite film using nanoindentation tests
|
Han, Chang-Fu; Wu, Bo-Hsiung; Lin, Jen-Fin; Chung, Chen-Kuei |
| 國立成功大學 |
2008-08 |
A high-efficiency planar micromixer with convection and diffusion mixing over a wide Reynolds number range
|
Shih, T. R.; Chung, Chen-Kuei |
| 國立成功大學 |
2008-05 |
Effect of geometry on fluid mixing of the rhombic micromixers
|
Chung, Chen-Kuei; Shih, T. R. |
| 國立成功大學 |
2008-02 |
Effect of nitrogen flow ratio on the microstructure evolution and nanoindented mechanical property of the Ta-Si-N thin films
|
Chung, Chen-Kuei; Chen, T. S. |
| 國立成功大學 |
2007-12-15 |
Residual stress and hardness behaviors of the two-layer C/Si films
|
Chung, Chen-Kuei; Peng, C. C.; Wu, Bo-Hsiung; Chen, T. S. |
| 國立成功大學 |
2007-12 |
A rhombic micromixer with asymmetrical flow for enhancing mixing
|
Chung, Chen-Kuei; Shih, T. R. |
| 國立成功大學 |
2007-10 |
Effect of microstructures on the electrical and optoelectronic properties of nanocrystalline Ta-Si-N thin films by reactive magnetron cosputtering
|
Chung, Chen-Kuei; Chen, T. S. |
| 國立成功大學 |
2007-06-10 |
A hybrid CO2 laser processing for silicon etching
|
Chung, Chen-Kuei; Wu, M. Y. |
| 國立成功大學 |
2007-03 |
Effect of pulse frequency on the morphology and nanoindentation property of electroplated nickel films
|
Chung, Chen-Kuei; Chang, W. T. |
| 國立成功大學 |
2007-03 |
Fabrication and analysis of the reflowed microlens arrays using JSR THB-130 N photoresist with different heat treatments
|
Chung, Chen-Kuei; Hong, Y. Z. |
| 國立成功大學 |
2007-03 |
Fabrication of the monolithic polymer-metal microstructure by the backside exposure and electroforming technology
|
Chung, Chen-Kuei; Hong, Y. Z.; Chang, W. T. |
| 國立成功大學 |
2007-02 |
Surface modification of SU8 photoresist for shrinkage improvement in a monolithic MEMS microstructure
|
Chung, Chen-Kuei; Hong, Y. Z. |
| 國立成功大學 |
2007-02 |
Effect of seed layer stress on the fabrication of monolithic MEMS microstructure
|
Chung, Chen-Kuei; Fang, Y. J.; Cheng, C. M.; Hong, Y. Z.; Wang, C. H. |
| 國立成功大學 |
2006-12-20 |
Thermal stability of Ta-Si-N nanocomposite thin films at different nitrogen flow ratios
|
Chung, Chen-Kuei; Chen, T. S.; Peng, C. C.; Wu, B. H. |
| 國立成功大學 |
2006-12-20 |
Annealing effects on microstructure and properties of Ta-Al thin film resistors
|
Chung, Chen-Kuei; Chang, Y. L.; Chen, T. S.; Su, P. J. |
| 國立成功大學 |
2006-12-05 |
Effect of amorphous Si layer on the reaction of carbon and silicon in the C/Si multilayer by high vacuum annealing
|
Chung, Chen-Kuei; Wu, Bo-Hsiung |
| 國立成功大學 |
2006-10-12 |
A novel fabrication of ionic polymer-metal composites (IPMC) actuator with silver nano-powders
|
Chung, Chen-Kuei; Fung, P. K.; Hong, Y. Z.; Ju, Ming-Shaung; Lin, Chou-Ching K.; Wu, T. C. |
| 國立成功大學 |
2006-07-14 |
Thermally induced formation of SiC nanoparticles from Si/C/Si multilayers deposited by ultra-high-vacuum ion beam sputtering
|
Chung, Chen-Kuei; Wu, Bo-Hsiung |
| 國立成功大學 |
2006-04-27 |
Global and local residual stress in silicon carbide films produced by plasma-enhanced chemical vapor deposition
|
Chung, Chen-Kuei; Lin, Tzu-Yin; Duh, Jenq-Gong; Tsai, Ming-Qun |
| 國立成功大學 |
2005-12 |
Simulation and fabrication for pin-to-plate microjoining by Nd : YAG laser
|
Chung, Chen-Kuei; Lin, Y. C. |
| 國立成功大學 |
2005-11-21 |
Amorphization of Ta-Al films using magnetron sputtering
|
Su, P. J.; Chung, Chen-Kuei |
| 國立成功大學 |
2005-11 |
Bulge formation and improvement of the polymer in CO2 laser micromachining
|
Chung, Chen-Kuei; Huang, G. R.; Lin, Y. C. |
| 國立成功大學 |
2005-01 |
Fabrication and characterization of amorphous Si films by PECVD for MEMS
|
Chung, Chen-Kuei; Tsai, Ming-Qun; Tsai, Po-Hao; Lee, Chiapyng |
| 國立成功大學 |
2004-11 |
Material characterization and nanohardness measurement of nanostructured Ta-Si-N film
|
Chung, Chen-Kuei; Su, P. J. |
| 國立成功大學 |
2004-10 |
Combination of thick resist and electroforming technologies for monolithic inkjet application
|
Chung, Chen-Kuei; Lin, C. J.; Chen, C. C.; Fang, Y. J.; Tsai, M. Q. |
| 國立成功大學 |
2004-10 |
Selection of mold materials for electroforming of monolithic two-layer microstructure
|
Chung, Chen-Kuei; Lin, C. J.; Wu, L. H.; Fang, Y. J.; Hong, Y. Z. |
| 國立成功大學 |
2004-04 |
Geometrical pattern effect on silicon deep etching by an inductively coupled plasma system
|
Chung, Chen-Kuei |
| 國立成功大學 |
2004-03 |
Modelling and fabrication of step height control of a multilevel Si(100) structure in KOH solution
|
Chung, Chen-Kuei |