| 南台科技大學 |
2020-02 |
The integrated quality control model with product inspection and process improvement
|
Chung-Ho Chen;Chao-Yu Chou |
| 南台科技大學 |
2020-01 |
The integrated study for process improvement with economic specification limits, process means setting and quality investment: an extension of the model in Abdul-Kader et al. (2010)
|
Chung-Ho Chen;Chao-Yu Chou |
| 南台科技大學 |
2019-08 |
Process quality improvement based on the application of rectifying sampling inspection plan
|
Chung-Ho Chen;Chao-Yu Chou |
| 南台科技大學 |
2017-05 |
The joint determination of specification limits,process mean, and economic manufacturing quantity
|
Chung-Ho Chen; Chao-Yu Chou |
| 中國醫藥大學 |
2011-10 |
The use of tobacco-free betel-quid in conjunction with alcohol ? tobacco impacts early-onset age and carcinoma distribution for upper aerodigestive tract cancer
|
(Chien-Hung Lee);(Ka-Wo Lee);(Fu-Min Fang);(Deng-Chyang Wu);(Tien-Yu Shieh);(Hsiao-Ling Huang);(Chung-Ho Chen);(Ping-Ho Chen);(Mu-Kuan Chen);(Shou-Jen Kuo);(Cheng-Hsien Chang);(Yi-Shan Tsai);(Shang-Lun Chiang);(Hung-Pin Tu);(Bai-Hsiun Chen);葛應欽(Ying-Chin Ko)* |
| 真理大學 |
2011-04 |
高中職學校橄欖球運動代表隊發展與阻礙因素之研究
|
陳中和; 徐瑋翔; 蔡鈞閔; Chung-Ho Chen; Wei-Hsiang Hsu; Chun-Min Tsai |
| 義守大學 |
2010-02 |
Methyl-Typing: An improved and visualized COBRA software for epigenomic studies
|
Cheng-Hong Yang;Li-Yeh Chuang;Yu-Huei Cheng;De-Leung Gu;Chung-Ho Chen;Hsueh-Wei Chang |
| 高雄醫學大學 |
2010 |
Methyl-Typing: an improved and visualized COBRA software for epigenomic studies
|
谷德倫;張學偉 ; Cheng-Hong Yang;Li-Yeh Chuang;Yu-Huei Cheng;De-Leung Gu;Chung-Ho Chen;Hsueh-Wei Chang |
| 義守大學 |
2009-06 |
Matrix metalloproteinases (MMP) 1 and MMP10 but not MMP12 are potential oral cancer markers
|
Ching-Yu Yen;Chung-Ho Chen;Chao-Hsiang Chang;Hung-Fu Tseng;Shyun-Yeu Liu;Li-Yeh Chuang;Cheng-Hao Wen;Hsueh-Wei Chang |
| 臺北醫學大學 |
2009 |
MMP1 and MMP10 but not MMP12 are potential oral cancer markers
|
顏欽堉; Ching-Yu Yeb; Chung-Ho Chen; Chao-Hsiang Chang; Hung-Fu Tseng; Shyun-Yui Liu; |
| 高雄醫學大學 |
2009 |
MMP1 and MMP10 but not MMP1Matrix Metalloproteinases (MMP) 1 and MMP10 but not MMP12 are potential oral cancer markers2 are the potential oral cancer markers
|
張朝翔;陳中和;谷德倫;溫政浩;張學偉; Ching-Yu Yen;Shyun-Yui Liu;Chao-Hsiang Chang;Chung-Ho Chen;Hung-Fu Tseng;De-Leung Gu;Li-Yeh Chuang;Cheng-Hao Wen;Hsueh-Wei Chang |
| 南台科技大學 |
2008-08-07~09 |
Optimum production run length and target value setting for a filling process
|
陳忠和; Chung-Ho Chen |
| 南台科技大學 |
2008-08-07~09 |
Economic specification limits based on single sampling rectifying inspection plan
|
陳忠和; Chung-Ho Chen |
| 義守大學 |
2008-05 |
Combinational polymorphisms of four DNA repair genes XRCC1, XRCC2, XRCC3 and XRCC4 and their association with oral cancer in Taiwan
|
Ching-Yu Yen;Shyun-Yeu Liu;Chung-Ho Chen;Hung-Fu Tseng;Li-Yeh Chuang;Cheng-Hong Yang;Ying-Chu Lin;Cheng-Hao Wen;Wei-Fan Chiang;Chang-Hsuan Ho;Hsiang-Chi Chen;Shaio-Ting Wang;Cheng-Wen Lin;Hsueh-Wei Chang |
| 中國醫藥大學 |
2008-05 |
Combinational polymorphisms of four DNA repair genes XRCC1, XRCC2, XRCC3, and XRCC4 and their association with oral cancer in Taiwan
|
(Ching-Yu Yen); (Shyun-Yeu Liu); (Chung-Ho Chen); (Hung-Fu Tseng); (Li-Yeh Chuang); (Cheng-Hong Yang); (Ying-Chu Lin); (Cheng-Hao Wen); (Wei-Fan Chiang); (Chang-Hsuan Ho); (Hsiang-Chi Chen); (Shaio-Ting Wang); 林振文(Lin Cheng Wen); 張學偉(Hsueh-Wei Chang) |
| 南台科技大學 |
2008-01 |
The determination of economic production run length and manufacturing target by considering quality loss function
|
陳忠和; Chung-Ho Chen |
| 南台科技大學 |
2008-01 |
Optimum production run length and warranty period setting for the imperfect production system
|
陳忠和; Chung-Ho Chen |
| 南台科技大學 |
2007-12 |
Joint Determination of Optimum Process Mean and Economic Specification Limits for Rectifying Inspection Plan with Inspection Error
|
陳忠和; Chung-Ho Chen |
| 南台科技大學 |
2007-11 |
Economic Manufacturing Quantity, Optimum Process Mean, and Economic Specification Limits Setting under the Rectifying Inspection Plan
|
Chung-Ho Chen; Min-Tsai Lai; 賴明才 |
| 南台科技大學 |
2007-11 |
Economic manufacturing quantity, optimum process mean, and economic specification limits setting under the rectifying inspection plan
|
陳忠和; Chung-Ho Chen; Min-Tsai Lai |
| 南台科技大學 |
2007-11 |
X-bar Control Chart Based on the Cost Evaluation
|
陳忠和; Chung-Ho Chen |
| 南台科技大學 |
2007-11 |
應用選剔檢驗計劃於最佳製程平均數與經濟生產數量以及經濟規格界限設定之研究(2/3)
|
陳忠和; Chung-Ho Chen |
| 南台科技大學 |
2007-10 |
Determining the Optimum Process Mean based on Quadratic Quality Loss Function and Rectifying Inspection Plan
|
Chung-Ho Chen; Min-Tsai Lai |
| 南台科技大學 |
2007-10 |
Determining the optimum process mean based on quadratic quality loss function and rectifying inspection plan
|
陳忠和; Chung-Ho Chen; Min-Tsai Lai |
| 南台科技大學 |
2007-10 |
Modified Economic Manufacturing Quantity Model for Product with Quality Loss under the Serial Production System and Rectifying Inspection Plan
|
陳忠和; Chung-Ho Chen |
| 南台科技大學 |
2007-08 |
Modified economic manufacturing quantity model considering product under the serial production system
|
陳忠和; Chung-Ho Chen |
| 南台科技大學 |
2007-05 |
Dodge-Romig rectifying single sampling plans based on inspection error
|
陳忠和; Chung-Ho Chen; Min-Tsai Lai |
| 南台科技大學 |
2007-04 |
The modified Al-Sultan's model for determining the optimum process mean under the rectifying inspection plan
|
陳忠和; Chung-Ho Chen |
| 南台科技大學 |
2007-01 |
Determining the optimum process mean based on manufacturing cost and quality loss
|
陳忠和; Chung-Ho Chen |
| 南台科技大學 |
2006-11 |
Window Processing for Deblocking Filter in H.264/AVC
|
Chung-Ming Chen; Chung-Ho Chen; Jian-Ping Zeng; Wan-Chug Hsu; Chao-Tang Yu; 陳中和;曾建平;余兆棠 |
| 南台科技大學 |
2006-11 |
Economic design of production run length and manufacturing target based on quality loss function
|
陳忠和; Chung-Ho Chen |
| 南台科技大學 |
2006-10 |
The modified Pulak and Al-Sultan's model for determining the optimum process parameters
|
陳忠和; Chung-Ho Chen |
| 南台科技大學 |
2006-09 |
Determining the Optimum Process Mean Under the Product Rework
|
Chung-Ho Chen ;Min-Tsai Lai |
| 南台科技大學 |
2006-09 |
Determining the optimum process mean under the product rework
|
陳忠和; Chung-Ho Chen; Min-Tsai Lai |
| 南台科技大學 |
2006-08 |
Window Architecture for Deblocking Filter in H.264/AVC
|
Chung-Ming Chen; Jian-Ping Zeng; Chung-Ho Chen; Chao-Tang Yu; Yu-Pin Chang; 余兆棠;張郁斌 |
| 南台科技大學 |
2006-08 |
Optimum production run length and warranty period setting for the imperfect production system
|
陳忠和; Chung-Ho Chen |
| 南台科技大學 |
2006-06 |
Minimum Average Fraction Inspected for CSP-M Plan
|
Chung-Ho Chen ; Min-Tsai Lai |
| 南台科技大學 |
2006-06 |
Minimum average fraction inspected for CSP-M plan
|
陳忠和; Chung-Ho Chen; Min-TSai Lai |
| 南台科技大學 |
2006-06 |
Optimum process mean setting under the membership function
|
陳忠和; Chung-Ho Chen |
| 南台科技大學 |
2006-06 |
Optimum production length and process mean setting
|
陳忠和; Chung-Ho Chen |
| 中國醫藥大學 |
2006-06 |
Donor site morbidity after harvesting of proximal tibia bone
|
陳遠謙(Yuan-Chien Chen); (Chung-Ho Chen); (Pai-Li Chen); (I-Yueh Huang); (Yee-Shyong Shen); 陳君明(Chun-Ming Chen)* |
| 南台科技大學 |
2006-05 |
Optimum process mean for a one-sided specification limit product considering manufacturing cost and quadratic quality loss考量製造成本與二次品質損失的單邊規格界限產品最佳製程平均數設定
|
陳忠和; Chung-Ho Chen; Kuo-Wei Huang |
| 南台科技大學 |
2006-03 |
Determining the optimum process mean for a mixed quality loss function
|
陳忠和; Chung-Ho Chen |
| 南台科技大學 |
2006-03 |
Economic design of short-run CSP-1 plan under linear inspection cost
|
陳忠和; Chung-Ho Chen; Chao-Yu Chou |
| 南台科技大學 |
2006-01 |
The optimum selection of imperfect quality economic manufacturing quantity and process mean by considering quadratic quality loss function考量二次品質損失函數的不完全經濟生產數量與最佳製程平均數設定
|
陳忠和; Chung-Ho Chen |
| 南台科技大學 |
2005-12 |
Application of bivariate parameter design to the optimization of the operating conditions of a turning process
|
陳忠和; C.Y. Chou; Chung-Ho Chen; C.C. Yang; C.C. Wu |
| 南台科技大學 |
2005-12 |
Economic Design of Dodge-Romig AOQL Single Sampling Plans by Variables with the Quadratic Loss Function
|
陳忠和; Chung-Ho Chen |
| 南台科技大學 |
2005-12 |
The determination of optimum process parameters based on considering process capability index
|
陳忠和; Chung-Ho Chen |
| 南台科技大學 |
2005-11 |
Determining the optimum process mean for the product with screening limits產品具篩選界限之最佳製程平均數設定
|
陳忠和; Chung-Ho Chen |
| 南台科技大學 |
2005-11 |
Determining the optimum manufacturing target under the uniform quality characteristic考量均等品質特性之最佳製造目標值設定
|
陳忠和; Chung-Ho Chen |
