|
|
Taiwan Academic Institutional Repository >
Browse by Author
|
"chung tien tung"
Showing items 1-23 of 23 (1 Page(s) Totally)
1
View [10|25|50] records per page
| 臺大學術典藏 |
2018-09-10T08:35:12Z |
Longitudinal stitching of sub-micron periodic fringes on a roller
|
Chen, L.-S.;Yen, J.-Y.;Chen, Y.-P.;Wang, L.A.;Chung, T.-T.;Lin, H.-I.;Chen, P.-H.;Chang, S.-H.; Chen, L.-S.; Yen, J.-Y.; Chen, Y.-P.; Wang, L.A.; Chung, T.-T.; Lin, H.-I.; Chen, P.-H.; Chang, S.-H.; JIA-YUSH YEN; Wang, Lon A.; Chung, Tien-Tung |
| 國立臺灣大學 |
2011 |
Longitudinal stitching of sub-micron periodic fringes on a roller
|
Chen, Lien-Sheng; Yen, Jia-Yush; Chen, Yung-Pin; Wang, Lon A.; Chung, Tien-Tung; Lin, Hung-I; Chen, Ping-Hung; Chang, Shu-Hung |
| 國立臺灣大學 |
2011 |
Multiplying optical tweezers force using a micro-lever
|
Lin, Chih-Lang; Lee, Yi-Hsiung; Lin, Chin-Te; Liu, Yi-Jui; Hwang, Jiann-Lih; Chung, Tien-Tung; Baldeck, Patrice L. |
| 國立臺灣大學 |
2011 |
Simulation and Correction of Angular Defects in Two-Photon Lithography
|
Lin, Chin-Te; Fan, Hsu; Bouriau, Michel; Liao, Chao-Yaug; Lin, Chih-Lang; Masclet, Cedric; Leon, Jean-Claude; Chung, Tien-Tung; Baldeck, Patrice L. |
| 國立臺灣大學 |
2009-07 |
A NxN Architecture for 2-D Mirror-Type Optical Switches
|
Chen, Shou-Heng; Fan, Kuang-Chao; Chung, Tien-Tung; Yang, Yao-Joe Joseph |
| 國立臺灣大學 |
2009-05 |
A 2x2 Mechanical Optical Switch With a Thin MEMS Mirror
|
Fan, Kuang-Chao; Lin, Wu-Lang; Chiang, Li-Hung; Chen, Shou-Heng; Chung, Tien-Tung; Yang, Yao-Joe |
| 國立臺灣大學 |
2009-05 |
Optimum Design of an 8x8 Optical Switch with Thermal Compensated Mechanisms
|
Chung, Tien-Tung; Lin, Chin-Te; Lee, Chung-Yun; Fan, Kuang-Chao; Chen, Shou-Heng |
| 國立臺灣大學 |
2008-06 |
Product Model Preparation and Processing for Micromanufacturing
|
Liao, Chao-Yaug; Leon, Jean-Claude; Masclet, Cedric; Bouriau, Michel; Baldeck, Patrice L.; Chung, Tien-Tung |
| 國立臺灣大學 |
2007-01 |
A Novel Micro/Nano 1x4 Mechanical Optical Switch
|
Lin, Wu-Lang; Fan, Kuang-Chao; Chiang, Li-Hung; Yang, Yao-Joe; Kuo, Wen-Cheng; Chung, Tien-Tung |
| 國立高雄第一科技大學 |
2006.07 |
A novel micro/nano 1×4 mechanical optical switch
|
Lin, Wu-Lang;Fan, Kuang-Chao;Chiang, Li-Hung;Yang, Yao-Joe;Kuo, Wen-Cheng;Chung, Tien-Tung; 郭文正 |
| 國立臺灣大學 |
2005-07 |
An integrated scanning system for reconstructing 3D color models of general objects
|
Chung, Tien-Tung; Liao, Chao-Yaug |
| 國立臺灣大學 |
2005-06-28 |
A miniature low cost and high reliability 1 × 2 mechanical optical switch
|
Fan, Kuang-Chao; Lin, Wu-Lang; Chung, Tien-Tung; Wang, Hung-Yu; Wu, Long-Pong |
| 國立臺灣大學 |
2003 |
Research on adjusting penalty factor in genetic algorithms for structural optimization
|
Chung, Tien-Tung; Wen, Chung-Rong |
| 國立臺灣大學 |
2002 |
Structural shape optimization using self-adjusted convex approximation
|
Chung, Tien-Tung; Chiou, Chyou-Huey |
| 國立臺灣大學 |
2001 |
Self-adjusted convex approximation method for structural optimization
|
Chung, Tien-Tung; Chiou, Chyou-Huey |
| 國立臺灣大學 |
1996 |
輕量模組化CNC工具機研發子計劃三:輕量模組化工具機結構之分析與設計
|
劉正良; 鍾添東; Liu, Cheng-Liung; Chung, Tien-Tung |
| 國立臺灣大學 |
1992 |
Dynamic response optimization of nonlinear structures with viscous damping effects for design-dependent cyclic loads
|
Lin, Yang-Tai; Chung, Tien-Tung; Sun, Te-Chang |
| 國立臺灣大學 |
1991 |
二階靈敏度值於機械元件形狀最佳設計之應用
|
鍾添東; Chung, Tien-Tung |
| 國立臺灣大學 |
1991 |
含運動與動力限制條件之凸輪外形最佳設計
|
鍾添東; Chung, Tien-Tung |
| 國立臺灣大學 |
1990 |
非線性結構靜態反應之最佳化設計
|
鍾添東; Chung, Tien-Tung |
| 國立臺灣大學 |
1989 |
利用有限差分法分析平面磨床結構之溫度分佈及其應用
|
鍾添東; Chung, Tien-Tung |
| 國立臺灣大學 |
1989 |
鋼之熱處理變形模擬研究(II)
|
顏瑞和; 潘永寧; 鍾添東; 顏瑞和; 潘永寧; Chung, Tien-Tung |
| 國立臺灣大學 |
1988 |
鋼之熱處理變形模擬研究(I)
|
顏瑞和; 潘永寧; 鍾添東; 顏瑞和; 潘永寧; Chung, Tien-Tung |
Showing items 1-23 of 23 (1 Page(s) Totally)
1
View [10|25|50] records per page
|
