| 國立成功大學 |
2001-06 |
Crystallization mechanism of LiNiO2 synthesized by Pechini method
|
Lin, Shih-Pin; Fung, Kuan-Zong; Hon, Yi-Ming; Hon, Min-Hsiung |
| 國立成功大學 |
2001-05-01 |
The effect of deposition temperature on the properties of Al-doped zinc oxide thin films
|
Chang, J. F.; Hon, Min-Hsiung |
| 國立成功大學 |
2001-05 |
Effect of H-2 addition on characteristics of TiN films deposited by APCVD
|
Huang, Hong-Hsin; Hon, Min-Hsiung |
| 國立成功大學 |
2001-04 |
Synthesis and characterization of Li1+delta Mn2-delta O4 powders prepared by citric acid gel process
|
Hon, Yi-Ming; Fung, Kuan-Zong; Hon, Min-Hsiung |
| 國立成功大學 |
2001-01 |
Formation of intermetallic compounds at eutectic Sn-Zn-Al solder/Cu interface
|
Yu, Shan-Pu; Wang, Moo-Chin; Hon, Min-Hsiung |
| 國立成功大學 |
2001 |
Determination of thin film hardness for a film/substrate system
|
Wang, Hsiao-Lei; Chiang, Ming-Jeng; Hon, Min-Hsiung |
| 國立成功大學 |
2000-09 |
The effects of flux on the wetting characteristics of near-eutectic Sn-Zn-In solder on Cu substrate
|
Yu, Shan-Pu; Liao, Cheng-Lung; Hon, Min-Hsiung; Wang, Moo-Chin |
| 國立成功大學 |
2000-08 |
Effects of process parameters on the soldering behavior of the eutectic Sn-Zn solder on Cu substrate
|
Yu, Shan-Pu; Lin, H. J.; Hon, Min-Hsiung; Wang, Moo-Chin |
| 國立成功大學 |
2000-08 |
Properties of alumina-zirconia-graphite refractories with particle size according to the Andreasen model
|
Yu, Shan-Pu; Wang, Moo-Chin; Hon, Min-Hsiung |
| 國立成功大學 |
2000-06 |
Composition and heat-treatment effects on the adhesion strength of Sn-Zn-Al solders on Cu substrate
|
Yu, Shan-Pu; Hon, Min-Hsiung; Wang, Hsin-Chien; Wang, Moo-Chin |
| 國立成功大學 |
2000-06 |
In situ evaluation of dimensional variations during water extraction from alumina injection-moulded parts
|
Yang, Wei-Wen; Hon, Min-Hsiung |
| 國立成功大學 |
2000-05 |
Effect of temperature and atmosphere on phase stability and morphology of LiMn2O4 powder synthesized by citric acid gel process
|
Hon, Yi-Ming; Fung, Kuan-Zong; Hon, Min-Hsiung |
| 國立成功大學 |
2000-04 |
X-ray photoelectron spectroscopy investigation of substrate surface pretreatments for diamond nucleation by microwave plasma chemical vapor deposition
|
Chiang, Ming-Jeng; Hon, Min-Hsiung |
| 國立成功大學 |
2000-04 |
Low-pressure deposition of diamond by electron cyclotron resonance microwave plasma chemical vapor deposition
|
Chiang, Ming-Jeng; Lung, B. H.; Hon, Min-Hsiung |
| 國立成功大學 |
2000-04 |
Studying of transparent conductive ZnO : Al thin films by RF reactive magnetron sputtering
|
Chang, J. F.; Wang, Hsiao-Lei; Hon, Min-Hsiung |
| 國立成功大學 |
2000-03-01 |
Formation and densification of CaLa2S4 powders by sulfidization of modified metal alkoxides in different atmospheres
|
Tsay, Bor-Jou; Wang, Li-Hsing; Hon, Min-Hsiung |
| 國立成功大學 |
2000-02 |
Debinding process of Fe-6Ni-4Cu compact fabricated by metal injection molding
|
Wang, Jenn-Shing; Lin, Shih-Pin; Hon, Min-Hsiung; Wang, Moo-Chin |
| 國立成功大學 |
2000-02 |
The adhesion strength of a lead-free solder hot-dipped on copper substrate
|
Yu, Shan-Pu; Hon, Min-Hsiung; Wang, Moo-Chin |
| 國立成功大學 |
2000-02 |
Surface strengthening and toughening of Si3N4/TiC layered composite by slip casting
|
Yeh, Chih-Hung; Hon, Min-Hsiung |
| 國立成功大學 |
1999-08-16 |
Colloidal processing of titanium nitride with poly-(methacrylic acid) polyelectrolyte
|
Shih, Chi-Jen; Lung, Bor-Hwa; Hon, Min-Hsiung |
| 國立成功大學 |
1999-05-21 |
The effect of residual stress on adhesion of silicon-containing diamond-like carbon coatings
|
Wu, Weng-Jin; Hon, Min-Hsiung |
| 國立成功大學 |
1999 |
Effect of amount of carbonyl iron powders on the sintering microstructure, and mechanical properties of Fe-4Cu alloy synthesized using metal injection molding
|
Wang, J. S.; Hon, Min-Hsiung |
| 國立成功大學 |
1999 |
Formation and densification of Pb0.1Ca0.9La2S4 powders by sulfidization of modified metal alkoxides
|
Tsay, Bor-Jou; Wang, Li-Hsing; Hon, Min-Hsiung |
| 國立成功大學 |
1999 |
Temperature dependence of ceramics hardness
|
Wang, H. L.; Hon, Min-Hsiung |
| 國立成功大學 |
1998-05 |
Calcium phosphate coating on titanium substrate by a modified electrocrystallization process
|
Chen, Jim-Shone; Juang, Horng-Yih; Hon, Min-Hsiung |
| 國立臺灣大學 |
1995 |
The effects of Na4P2O7 ? 10H2O addition on the mechanical properties of sintered Ca2P2O7 bioceramic
|
Lin, Feng-Huei; Liaw, Jen-Ren; Hon, Min-Hsiung; Wang, Cheng-Yi |
| 國立臺灣大學 |
1991 |
Fabrication and biocompatibility of a porous bioglass ceramic in a Na2O---CaO---SiO2---P2O5 system
|
Lin, Feng-Huei; Huang, Yi-You; Hon, Min-Hsiung; Wu, Shih-Ching |
