| 國立交通大學 |
2014-12-08T15:40:39Z |
Precision micro-/nano-machining in a scanning electron microscope by run-to-run control based on image feedbacks
|
Liao, Lun-De; Chao, Paul C. -P.; Lin, Yu-Jhu; Chiu, Chi-Wei; Miaou, Shaou-Gang; Chang, Ming; Huang, Jeng-Sheng |
| 國立交通大學 |
2014-12-08T15:06:09Z |
Nonplanar modeling and experimental validation of a spindle-disk system equipped with an automatic balancer system in optical disk drives
|
Chao, Paul C. -P.; Sung, Cheng-Kuo; Wu, Szu-Tuo; Huang, Jeng-Sheng |
| 中原大學 |
2007-11 |
基因類神經網路用於快速自動對焦法之研究 A Study of Fast Auto-Focusing Method Using GA-Based Neural Network
|
梁禾凱;趙昌博;黃健生;杜哲怡 ;Liang, H.-K.;Chao, Paul C.-P.;Huang, Jeng-Sheng;Tu, Tse-Yi |
| 中原大學 |
2007-11 |
次世代光碟機關鍵技術研究---子計畫五 次世代光碟機高剛性軸承之理論分析設計與實驗驗證(II) Theoretical Analysis and Expriimental Study of the Next-Gerenation High-Stiffness Hydrodynamic Bearing for Optical Disc Drives (II)
|
黃健生;賴政良; Huang, Jeng-Sheng |
| 中原大學 |
2005-12 |
由靜電力致動之可形變微型薄板崩潰位置之精準估測 Predicting Pull-In Position of a Deformed Micro-Plate Actuated by Distributed Electrostatic Force
|
趙昌博;丘祺緯 ;Chao, Paul C.- P.;Chiu, Chi- Wei;Huang, Jeng-Sheng |
| 國立臺灣大學 |
2005 |
週期性腫瘤運動之影像追蹤與超音波熱治療
|
黃正聖; Huang, Jeng-Sheng |
| 國立高雄第一科技大學 |
2003.06 |
Parametric control of an axially moving string via fuzzy sliding-mode and fuzzy neural network methods
|
Huang, Jeng-Sheng;Paul, C.-P.Chao;Fung, Rong-Fong; 馮榮豐 |
| 中原大學 |
2002-12 |
傳動軸之軸向振動控制 Transverse Vibration Reduction of an Axially Moving String via Adjusting String Tension
|
趙昌博;黃健生;賴正良;馮榮豐; Chao, Paul C. P.;Huang, Jeng-Sheng;Lai, Cheng-Liang;Fung, Rong-Fong |
| 中原大學 |
2002-12 |
Transverse Vibration Reduction of an Axially Moving String Via Adjusting String Tension
|
Chao, C. P. Paul;Huang, Jeng-Sheng;Lai, Cheng-Liang;Fung, Rong-Fong |
| 中原大學 |
1998-11 |
具初始應力之雙模式超音波馬達的動態分析 Dynamic Analysis of a Bimodal Ultrasonic Motor with Initially Stressed Force onto the Rotor
|
黃健生;馮榮豐;曾奇潤;詹尚欽; Huang, Jeng-Sheng;Fung, Rong-Fong;Tseng, Chien-Reng;Jan, Sun-Chin |
| 中原大學 |
1996-11 |
應變率對深引伸加工應力與應變分布的影響 The Effect of Strain Rate on the Stress and Strain Distributions in Deep Drawing
|
施延欣;戴建祥;黃獻德;黃健生; Shih, Yan-Shin;Tai, Chien-Hsiang;Huang, Shiann-Der;Huang, Jeng-Sheng |
| 中原大學 |
1996-06 |
The Application of Gas-Assisted Injection Molding to Automotive Parts
|
Chen, Shia Chung;Huang, Jeng Sheng;Jong, Wen Ren |
| 中原大學 |
1996-06 |
On the Nonlinear Flexible Vibration and Constant Angular Velocity Control of the Slider-Crank Mechanism
|
Fung, Rong-Fong;Huang, Jeng-Sheng;Wang, Yun-Chen |
| 中原大學 |
1993-12 |
高速速回機構撓性桿的動態穩定性分析 Dynamic Stability of a High-Speed Quick-Return Mechanism with a Flexible Rod
|
黃健生;馮榮豐;李豐元 ;Huang, Jeng-Sheng;Fung, Rong-Fong;Lee, Feng-Yuan |
| 中原大學 |
1993-12 |
Dynamic Analysis of a High-Speed Slider-Crank Mechanism with a Flexible Connecting Rod
|
Fung, Rong-Fong;Huang, Jeng-Sheng;Jou, Chia-Horng |
| 中原大學 |
1992-12 |
簡諧及參數同時驅動的黏彈性樑的動態穩定性分析 Dynamic Stability of a Viscoelastic Beam Subjected to the Harmonic and Parametric Excitations Simultaneously
|
陳文祥;Huang, Jeng-Sheng;Fung, Rong-Fong;Chen, Wen-Hsiang |
| 中原大學 |
1991-12 |
搪孔加工時搪刀桿之穩態變形分析 Steady State Deformation Analysis of Boring Bar in Boring Machining
|
黃健生;黃吉川;王阿成 ;Huang, Jeng-Sheng;Huang, Chi-Chuan;Wang, A-Cheng |
| 中原大學 |
1991-08 |
Position and Recognition of Three Dimensional Object Using Stereo Vision
|
Huang, Jeng-Sheng;Liou, Shiaw-Chung |
