| 國立成功大學 |
2024-02-01 |
Improvement of mid-temperature ZT in a Bi-Se-Te via a two two-step sintering process
|
Yen;Hung-Sheng;Lin;Jen-Fin;Shi;Shih-Chen;Lin;Hao-Tung;Chiu;Jung-Chang |
| 國立成功大學 |
2022-01 |
Establishment of the Model Widely Valid for the Melting and Vaporization Zones in Selective Laser Melting Printings Via Experimental Verifications
|
Chang;Chang-Shuo;Wu;Kuan-Ta;Han;Chang-Fu;Tsai;Tsung-Wen;Liu;Sung-Ho;Lin;Jen-Fin |
| 國立成功大學 |
2021-09 |
Applications of energy flux and numerical analyses to the plasma etching of silicon deep trench isolation (DTI) structures
|
Han;Chang-Fu;Lin;Chun-Chiao;Lin;Jen-Fin |
| 國立成功大學 |
2021-05 |
Fractal parameters developed to evaluate the effects of laser textured surface on oil contact angle and tribological parameters
|
Chang;Chang-Shuo;Mahmood;Arif, Muhammad;Tsai;Tsung-Wen;Han;Chang-Fu;Chung;Chen-Kuei;Lin;Jen-Fin |
| 國立成功大學 |
2021-01 |
Effect of the addition of zirconium on the electrical, optical, and mechanical properties and microstructure of ITO thin films
|
Li;Ying-Tsung;Chen;Dian-Ting;Han;Chang-Fu;Lin;Jen-Fin |
| 國立成功大學 |
2020-12 |
Effects of roll pattern and reduction ratio on optical characteristics of A1008 cold-rolled steel specimens: analytical approach and experimental correlations
|
Mahmood;Arif, Muhammad;Han;Chang-Fu;Chu;Hsiao-Yeh;Sun;Ching-Cherng;Wu;Wen-Hsuan;Lin;Wei-;Jr;Liu;Lee-Cheng;Lai;Jiing-Yih;Mihailescu;Ion, N.;Lin;Jen-Fin |
| 國立成功大學 |
2020-12 |
Effect of femtosecond laser power and overlap ratio on surface roughness parameters, contact angle, and tribological properties of the textured SKD 61 tool steel with oil lubrication
|
Chang;Chang-Shuo;Hou;Kung-Hsu;Chung;Chen-Kuei;Tsai;Tsung-Wen;Lin;Jen-Fin |
| 國立成功大學 |
2020-11 |
Determinations of thermoelastic instability for ball-bearing-like specimens with spacers and in grease lubrications
|
Han;Chang-Fu;Chang;Chang-Shuo;Wu;Cheng-Jyun;Chu;Hsiao-Yeh;Horng;Jeng-Haur;Wei;Chin-Chung;Lin;Jen-Fin |
| 國立成功大學 |
2020-06-1 |
Effects of AZO film as inductive layer and annealing temperature on microstructure crystallinity and electrical and optical properties of IGZO/SiO2 and IGZO/AZO/SiO2 specimens
|
Chang;Chang-Shuo;Chen;You-He;Han;Chang-Fu;Lin;Jen-Fin |
| 國立成功大學 |
2020-06 |
Deep Trench Isolation and Inverted Pyramid Array Structures Used to Enhance Optical Efficiency of Photodiode in CMOS Image Sensor via Simulations
|
Han;Chang-Fu;Chiou;Jiun-Ming;Lin;Jen-Fin |
| 國立成功大學 |
2020-05 |
Effect of fractal parameters on optical properties of cold rolled aluminum alloy strips with induced surface deflection: Simulations and experimental correlations
|
Mahmood;Arif, Muhammad;Tsai;Tsung-Ying;Hwu;Yhu-Jen;Lin;Wei-;Jr;Liu;Lee-Cheng;Lai;Jiing-Yih;Pan;Jui-Wen;Li;Wang-Long;Lin;Jen-Fin |
| 國立成功大學 |
2020-03 |
Surface polishes of the SKD 61 tool steel by a femto pulse laser operating in a wide range of powers
|
Chang;Chang-Shuo;Chung;Chen-Kuei;Lin;Jen-Fin |
| 國立成功大學 |
2020-02-1 |
Effects of nitrogen/oxygen on the electrical and optical properties and microstructure of triple layer AZO/Ag/AZO thin films
|
Li;Ying-Tsung;Han;Fu, Chang;Lin;Jen-Fin |
| 國立成功大學 |
2020-02 |
Effects of fluorination of carbon film and annealing conditions on side leakage current and current breakdown time of SiO2/graphene/Cu/Ti/SiO2/Si specimens
|
Chang;Chang-Shuo;Cheng;Han-Che;Han;Chang-Fu;Lai;Chao-Sung;Lin;Jen-Fin |
| 國立成功大學 |
2020-01 |
Uses of empirical mode decomposition and multi-entropy techniques to establish the correlations among vibrations, friction coefficients and component wear of ball-bearing-like specimens
|
Han;Chang-Fu;Wu;Cheng-Chun;Chu;Hsiao-Yeh;Tsai;Ping-Hsueh;Horng;Jeng-Haur;Wei;Chin-Chung;Hwang;Yih-Chyun;Lin;Jen-Fin |
| 國立成功大學 |
2019-08-1 |
Characterization of the electrical and optical properties for a-IGZO/Ag/a-IGZO triple-layer thin films with different thickness depositions on a curved glass substrate
|
Li;Ying-Tsung;Han;Chang-Fu;Lin;Jen-Fin |
| 國立成功大學 |
2019-04 |
Study of the Electrical and Diffusion Barrier Properties in Ultrathin Carbon Film-Coated Copper Microwires for Interconnects
|
Chang;Chang-Shuo;Wang;Da-Jiun;Li;Tse-Chang;Shen;Chang-Hong;Jing;Yuan-Chou;Wu;Gien-Huang;Lin;Jen-Fin |
| 國立成功大學 |
2018-10 |
Techniques developed for fault diagnosis of long-range running ball screw drive machine to evaluate lubrication condition
|
Han;Chang-Fu;He;He-Qing;Wei;Chin-Chung;Horng;Jeng-Haur;Chiu;Yueh-Lin;Hwang;Yih-Chyun;Lin;Jen-Fin |
| 國立成功大學 |
2018-07-15 |
Effects of groove factor and surface roughness of raceway in ball-bearing-like specimens on tribological behavior and the onsets of two instabilities of dry contacts
|
Han;Chang-Fu;Chu;Hsiao-Yeh;Luo;Ruei-Yang;Liao;Neng-Tung;Wei;Chin-Chung;Chen;Guan-Lin;Tsai;Ping-Hsueh;Chiu;Yueh-Lin;Hwang;Yih-Chyun;Lin;Jen-Fin |
| 國立成功大學 |
2018-04-15 |
Effects of thin titanium and graphene depositions and annealing temperature on electrical, optical, and mechanical properties of IGZO/Ti/graphene/PI specimen
|
Li;Tse-Chang;Han;Chang-Fu;Hsieh;Kun-Chin;Lin;Jen-Fin |
| 國立成功大學 |
2018-04 |
Effects of SiO2 film thickness and operating temperature on thermally-induced failures in through-silicon-via structures
|
Han;Chang-Fu;Guo;Yi-Zhe;Chung;Chung-Jen;Shen;Chang-Hong;Lin;Jen-Fin |
| 國立成功大學 |
2017-10 |
Effects of Groove Factor and Surface Roughness of Raceway in Ball-Bearing-Like Specimens on Tribological Behavior and the Onsets of Two Instabilities of Dry Contacts
|
Han;Chang-Fu;Chu;Hsiao-Yeh;Luo;Ruei-Yang;Liao;Neng-Tung;Wei;Chin-Chung;Chen;Guan-Lin;Tsai;Ping-Hsueh;Chiu;Yueh-Lin;Hwang;Yih-Chyun;Lin;Jen-Fin |
| 國立成功大學 |
2017-09 |
Surface quality, microstructure, and mechanical properties of the SKD 61 tool steel with prior heat treatment affected by single- and double-pass continuous wave laser polishing
|
Chang;Chang-Shuo;Yang;Kai-Shiang;Chung;Chen-Kuei;Lin;Jen-Fin |
| 國立成功大學 |
2017-06 |
Tribological behavior and thermoelastic instability demonstrated in ball-bearing -like specimens operating in dry contacts and with grease lubrication
|
Han;Chang-Fu;Chu;Hsiao-Yeh;Kuo;Po-Chun;Liao;Neng-Tung;Hwang;Yih-Chyun;Chiu;Yueh-Lin;Lin;Jen-Fin |
