| 國立成功大學 |
2024-10 |
A Breakthrough in the Application of Simonkolleite in All-Solid-State Zn-Graphite Battery
|
Hsiao;Yi-Fen;Hung;Fei-Yi;Zhao;Jun-Ren |
| 國立成功大學 |
2024-08 |
Study of engineering developing decagonal-like rational approximant structure of Al-Ni-Cu-Fe-Mn-Cr senary system in aluminum alloy through additive manufacturing
|
Chang;Kai-Chieh;Hung;Fei-Yi;Zhao;Jun-Ren |
| 國立成功大學 |
2024-06 |
All-solid-state Li-ion battery: A study on the charge/discharge mechanism of an LMO-BCD-MgC system
|
Wu;Po-Ting;Zhao;Jun-Ren;Hung;Fei-Yi;Kuan;Hsin |
| 國立成功大學 |
2024-05 |
A new iron battery technology: Charge-discharge mechanism of ferrous chloride and ferric oxide electrolyte in all solid-state iron-graphite batteries
|
Chen;Zhi-Yue;Hung;Fei-Yi;Zhao;Jun-Ren |
| 國立成功大學 |
2024-02-5 |
Advancements in microstructure, texture characterization, and mechanical properties of powder metallurgy Al-Si-Mg-Fe alloy for engineering applications
|
Chang;Kai-Chieh;Hung;Fei-Yi;Zhao;Jun-Ren;Miu;Chi-Fong |
| 國立成功大學 |
2024-02 |
Effects of Heat-Treatment and Cold-Rolling on Mechanical Properties and Impact Failure Resistance of New Al 6082 Aluminum Alloy by Continuous Casting Direct Rolling Process
|
Zhao;Jun-Ren;Hung;Fei-Yi;Chen;Jian-Hong |
| 國立成功大學 |
2024-01 |
A new secondary battery technology: Electrode structure and charge-discharge mechanism of all-solid-state zinc-graphite batteries
|
Zhao;Jun-Ren;Wang;I-Hsiang;Hung;Fei-Yi |
| 國立成功大學 |
2024-01 |
A Study on Surface Modification Characteristics and Charge-Discharge Mechanism of Natural Serpentinite Ore Secondary Battery
|
Zhao;Jun-Ren;Chen;Kuan-Jen;Hung;Fei-Yi;Tsai;Yung-Yi;Wu;Po-Ting |
| 國立成功大學 |
2024-01 |
Application of New Al-Si Welding Filler with High Concentration of Copper and Magnesium: High-Temperature Strength and Anti-Corrosion Mechanism
|
Zhao;Jun-Ren;Hung;Fei-Yi;Pan;Chien-Yu |
| 國立成功大學 |
2023-12 |
Microstructural Characteristics and Material Failure Mechanism of SLM Ti-6Al-4V-Zn Alloy
|
Cheng;Yi-Jin;Hung;Fei-Yi;Zhao;Jun-Ren |
| 國立成功大學 |
2023-11~2023-12 |
Effects of the microstructure and texture characteristics on mechanical properties of the Al-Ni-Cu-Fe alloy manufactured by laser powder bed fusion
|
Chang;Kai-Chieh;Zhao;Jun-Ren;Hung;Fei-Yi |
| 國立成功大學 |
2023-06 |
A Technology for Bonding Cu Wires with Cu Pads: Structure and Electrical Fatigue Mechanism of Fine Micro-alloyed Cu Wires
|
Zhao;Jun-Ren;Chen;Yu-Jen;Hung;Fei-Yi |
| 國立成功大學 |
2023-02 |
Metallographic Mechanism of Embrittlement of 15 μm Ultrafine Quaternary Silver Alloy Bonding Wire in Chloride Ions Environment
|
Zhao;Jun-Ren;Hung;Fei-Yi;Hsu;Che-Wei |
| 國立成功大學 |
2023 |
Anti-tumor effects of deubiquitinating enzyme inhibitor PR-619 in human chondrosarcoma through reduced cell proliferation and endoplasmic reticulum stress-related apoptosis
|
Lin;Wei-Chou;Chiu;Yen-Lin;Kuo;Kuan-Lin;Chow;Po-Ming;Hsu;Chen-Hsun;Liao;Shih-Ming;Dong;Jun-Ren;Chang;Shih-Chen;Liu;Shing-Hwa;Liu;-Jung, Tsai;Hsu;-Shun, Fu;Wang;Kuo-Chuan;Lin;Yi-Chih;Chang;Chen-Chih;Huang;Kuo-Yuan |
| 國立成功大學 |
2022-10 |
Microstructure, Tensile Mechanical Properties and Electrical Fatigue Mechanism of a Microalloyed Copper Wire
|
Zhao;Jun-Ren;Lin;Yu-Che;Hung;Fei-Yi |
| 國立成功大學 |
2022-06 |
A Novel Two-Stage Heat Treatment with Medium-Temperature Aging Influence on Microstructure, Al-3(Sc, Zr) Nanoprecipitation, and Application Properties, Enhancing Selective Laser Melting of Al-Mg-Sc-Zr Alloy
|
Zhao;Jun-Ren;Lee;Liang-Yan;Chang;Kai-Chieh;Hung;Fei-Yi |
| 國立成功大學 |
2022-02 |
A Lateral Flow Immunoassay Coupled with a Spectrum-Based Reader for SARS-CoV-2 Neutralizing Antibody Detection
|
Huang;Rui-Lin;Fu;Yi-Chen;Wang;Yung-Chih;Hong;Chitsung;Yang;Wei-Chieh;Wang;I-Jen;Sun;Jun-Ren;Chen;Yunching;Shen;Ching-Fen;Cheng;Chao-Min |
| 國立成功大學 |
2021-11-25 |
Effects of hyper-high-temperature solid-solution treatment on microstructure evolution and nanoprecipitation of the Al-Ni-Cu-Fe-Zr-Sc alloy manufactured by selective laser melting
|
Chang;Kai-Chieh;Zhao;Jun-Ren;Hung;Fei-Yi |
| 國立成功大學 |
2021-06 |
Comparison of Laser Powder Bed Fusion and Cast Inconel 713 Alloy in Terms of Their Microstructure, Mechanical Properties, and Fatigue Life
|
Zhao;Jun-Ren;Hung;Fei-Yi;Lu;Chien-Sheng;Lai;I-Chun |
| 國立成功大學 |
2021-03~2021-04 |
Effects of heat treatment on a novel continuous casting direct rolling 6056 aluminum alloy: cold rolling characteristics and tensile fracture properties
|
Zhao;Jun-Ren;Hung;Fei-Yi;Chen;Bo-Jou |
| 國立成功大學 |
2021-01 |
Microstructure, Mechanical Properties, and Fatigue Fracture Characteristics of High-Fracture-Resistance Selective Laser Melting Al-Ni-Cu Alloys
|
Chang;Kai-Chieh;Zhao;Jun-Ren;Hung;Fei-Yi |
| 國立成功大學 |
2020-09 |
Current diagnostic tools for coronaviruses-From laboratory diagnosis to POC diagnosis for COVID-19
|
Wang;Yung-Chih;Lee;Yi-Tzu;Yang;Ting;Sun;Jun-Ren;Shen;Ching-Fen;Cheng;Chao-Min |
| 國立成功大學 |
2020-05~2020-06 |
Microstructure and tensile fracture behavior of three -stage heat treated inconel 718 alloy produced via laser powder bed fusion process
|
Zhao;Jun-Ren;Hung;Fei-Yi;Lui;Truan-Sheng |
| 國立成功大學 |
2020-01 |
Erosion Resistance and Particle Erosion-Induced Tensile Embrittlement of 3D-Selective Laser Melting Inconel 718 Superalloy
|
Zhao;Jun-Ren;Hung;Fei-Yi;Lui;Truan-Sheng |
| 國立成功大學 |
2019-07 |
Particle Erosion Induced Phase Transformation of Different Matrix Microstructures of Powder Bed Fusion Ti-6Al-4V Alloy Flakes
|
Zhao;Jun-Ren;Hung;Fei-Yi;Lui;Truan-Sheng |
| 國立成功大學 |
2019-05 |
The Relationship of Fracture Mechanism between High Temperature Tensile Mechanical Properties and Particle Erosion Resistance of Selective Laser Melting Ti-6Al-4V Alloy
|
Zhao;Jun-Ren;Hung;Fei-Yi;Lui;Truan-Sheng;Wu;Yu-Lin |
