| 臺大學術典藏 |
2021-12-16T01:43:30Z |
A New Forming-Limit Criterion for Fracture Presiction in a Powder Forming Application
|
Huang, C.C.; Cheng, J.H.; JUNG-HO CHENG |
| 臺大學術典藏 |
2021-12-16T01:43:29Z |
Optimization of Sandwich Monocoque Car Body with Equivalent Shell Element
|
Jung-Ho Cheng; Chih-Kai Chang; JUNG-HO CHENG |
| 臺大學術典藏 |
2021-12-16T01:43:29Z |
Design and implementation of PEMFC system and control strategy for hybrid fuel cells scooter
|
Sung-Ching Lin; Jung-Ho Cheng; JUNG-HO CHENG |
| 臺大學術典藏 |
2021-12-16T01:43:29Z |
Computing Battery SoC by Real-time Internal Resistance Determination
|
Yi-Hsiang Yang; Jung-Ho Cheng; Yi-Lung Chang; JUNG-HO CHENG |
| 臺大學術典藏 |
2021-12-16T01:43:28Z |
The Research of the Process of Manufacturing Tires
|
Yang, H.Y.; Cheng, J.H.; JUNG-HO CHENG |
| 臺大學術典藏 |
2021-12-16T01:43:28Z |
Parametric deflection corrections of annular sandwich panels under transverse central loads
|
鄭榮和; JUNG-HO CHENG |
| 臺大學術典藏 |
2021-12-16T01:43:28Z |
Research and Reduction on Vibrational Noise of Gear Pump
|
Yu, S.Y.; Cheng, J.H.; JUNG-HO CHENG |
| 臺大學術典藏 |
2021-08-05T02:37:24Z |
Modelling of air pumping noise and study of tread pattern pitch
|
Guo T.-W;Cheng J.-H.; Guo T.-W; Cheng J.-H.; JUNG-HO CHENG |
| 臺大學術典藏 |
2021-08-05T02:37:24Z |
Erratum: An energy management strategy for through-the-road type plug-in hybrid electric vehicles (SAE International Journal of Alternative Powertrains (2019) 8:1 (61-74) DOI: 10.4271/08-08-01-0004)
|
Chen M.-Y;Yang K;Sun Y.-Z;Cheng J.-H.; Chen M.-Y; Yang K; Sun Y.-Z; Cheng J.-H.; JUNG-HO CHENG |
| 臺大學術典藏 |
2021-03-29T06:10:14Z |
自駕車超車控制及避障策略開發
|
李則霖;盧玟翰;彭毓瑩;鄭榮和; 李則霖; 盧玟翰; 彭毓瑩; 鄭榮和; JUNG-HO CHENG |
| 臺大學術典藏 |
2021-03-29T06:10:14Z |
Study of the Influence of Carcass Temperature on Rolling Resistance
|
郭庭瑋(Ting-Wei Guo);鄭榮和(Jung-Ho Cheng); 郭庭瑋(Ting-Wei Guo); 鄭榮和(Jung-Ho Cheng); JUNG-HO CHENG |
| 臺大學術典藏 |
2020-01-13T08:21:10Z |
Analysis of Instability and Strain Concentration during Superplastic Deformation
|
Chung, Li Chuan; Cheng, Jung Ho; JUNG-HO CHENG |
| 臺大學術典藏 |
2020-01-13T08:21:10Z |
Detection of a change in the oxidation state on aluminum surface using angular correlation of positron annihilation radiation
|
Chuang, S.Y.; Cheng, J.H.; Tseng, P.K.; Chen, D.E.; JUNG-HO CHENG |
| 臺大學術典藏 |
2020-01-13T08:21:09Z |
A mesh re?zoning technique for finite element simulations of metal forming processes
|
Cheng, J.?H.; Kikuchi, N.; JUNG-HO CHENG |
| 臺大學術典藏 |
2020-01-13T08:21:09Z |
An incremental constitutive relation of unilateral contact friction for large deformation analysis
|
Cheng, J.-H.; Kikuchi, N.; JUNG-HO CHENG |
| 臺大學術典藏 |
2020-01-13T08:21:09Z |
New Heat Flux Model in Surface Grinding
|
Zhang, L.; Ge, Pei Qi; Meng, J.F.; Cheng, J.H.; Wang, M.; JUNG-HO CHENG |
| 臺大學術典藏 |
2020-01-13T08:21:09Z |
A New Model for Predicting Small Crack Growth Rates
|
Zhang, Hong Cai; Huang, K.Z.; Cheng, J.H.; JUNG-HO CHENG |
| 臺大學術典藏 |
2020-01-13T08:21:08Z |
Development and verification of collision avoidance and obstacle dodge algorithm for autonomous vehicles
|
Lu, W.-H.; Li, C.-H.; Peng, Y.-Y.; Cheng, J.-H.; JUNG-HO CHENG |
| 臺大學術典藏 |
2020-01-13T08:21:08Z |
Study of different arrangement of magnets for the purpose of reducing magnet usage in designing an integrated starter/generator for hybrid vehicles
|
Hsueh, K.-F.; Cheng, J.-H.; Chen, Y.-S.; Lu, A.; JUNG-HO CHENG |
| 臺大學術典藏 |
2020-01-13T08:21:08Z |
Automatic adaptive remeshing for finite element simulation of forming processes
|
Cheng, J.?H.; JUNG-HO CHENG |
| 臺大學術典藏 |
2020-01-13T08:21:08Z |
An Energy Management Strategy for Through-the-Road Type Plug-in Hybrid Electric Vehicles
|
Chen, M.-Y.; Yang, K.; Sun, Y.-Z.; Cheng, J.-H.; JUNG-HO CHENG |
| 臺大學術典藏 |
2018-09-10T09:45:10Z |
Study of different arrangement of magnets for the purpose of reducing magnet usage in designing an integrated starter/generator for hybrid vehicles
|
JUNG-HO CHENG;Lu, A.;Chen, Y.-S.;Cheng, J.-H.;Hsueh, K.-F.;JUNG-HO CHENG; Hsueh, K.-F.; Cheng, J.-H.; Chen, Y.-S.; Lu, A.; JUNG-HO CHENG |
| 臺大學術典藏 |
2018-09-10T09:18:51Z |
Tension-compression viscoelastic behaviors of the periodontal ligament
|
Wang, Chen-Ying; Su, Ming-Zen; Chang, Hao-Hueng; Chiang, Yu-Chih; Tao, Shao-Huan; Cheng, Jung-Ho; Fuh, Lih-Jyh; Lin, Chun-Pin; CHEN-YING WANG; Wang, Chen-Ying; Lee, Posen; JUNG-HO CHENG; Su, Ming-Zen; Liu, Chin-Hsuan; Fan, Chia-Wei; Chang, Hao-Hueng; YU-CHIH CHIANG; CHUN-PIN LIN; Chiang, Yu-Chih; Lu, Chi-Pang; Tao, Shao-Huan; Lu, Wen-Shian; Hsieh, Ching-Lin; Cheng, Jung-Ho; Fuh, Lih-Jyh; Lin, Chun-Pin; 林俊彬; 章浩宏; 王振穎; 姜昱至; 王政穎; 王政穎;姜昱至;王振穎;章浩宏;林俊彬;Lin, Chun-Pin;Fuh, Lih-Jyh;Cheng, Jung-Ho;Hsieh, Ching-Lin;Lu, Wen-Shian;Tao, Shao-Huan;Lu, Chi-Pang;Chiang, Yu-Chih;CHUN-PIN LIN;YU-CHIH CHIANG;Chang, Hao-Hueng;Fan, Chia-Wei;Liu, Chin-Hsuan;Su, Ming-Zen;JUNG-HO CHENG;Lee, Posen;Wang, Chen-Ying;CHEN-YING WANG;Lin, Chun-Pin;Fuh, Lih-Jyh;Cheng, Jung-Ho;Tao, Shao-Huan;Chiang, Yu-Chih;Chang, Hao-Hueng;Su, Ming-Zen;Wang, Chen-Ying;Lin, Chun-Pin;Fuh, Lih-Jyh;Cheng, Jung-Ho;Hsieh, Ching-Lin;Lu, Wen-Shian;Tao, Shao-Huan;Lu, Chi-Pang;Chiang, Yu-Chih;CHUN-PIN LIN;YU-CHIH CHIANG;Chang, Hao-Hueng;Fan, Chia-Wei;Liu, Chin-Hsuan;Su, Ming-Zen;JUNG-HO CHENG;Lee, Posen;Wang, Chen-Ying;CHEN-YING WANG |
| 臺大學術典藏 |
2018-09-10T08:10:51Z |
Effect of Vehicle Control Unit parameters on electric vehicle driving operation responses
|
Hsu, Y.-J.; Cheng, J.-H.; Yang, Y.-H.; JUNG-HO CHENG |
| 臺大學術典藏 |
2018-09-10T08:10:51Z |
An improved regenerative braking control strategy and system for dual motor electric vehicle
|
JUNG-HO CHENG;Cheng, J.-H.;Yang, Y.-H.;Wueng, C.-C.;JUNG-HO CHENG; Wueng, C.-C.; Yang, Y.-H.; Cheng, J.-H.; JUNG-HO CHENG |
| 臺大學術典藏 |
2018-09-10T08:10:50Z |
Traction control for an All-Wheel-Drive electric vehicle with estimation of speed and friction force
|
JUNG-HO CHENG;Cheng, J.-H.;Hsu, Y.-W.;JUNG-HO CHENG; Hsu, Y.-W.; Cheng, J.-H.; JUNG-HO CHENG |
| 臺大學術典藏 |
2018-09-10T08:10:50Z |
Research and design of an intelligent personal lightweight electric vehicle
|
Hsu, T.-T.; Lo, S.-Y.; Cheng, J.-H.; JUNG-HO CHENG |
| 臺大學術典藏 |
2018-09-10T08:10:50Z |
Influence of PMSM magnet arrangement effected motor torque analysis and research
|
Cheng, J.-H.; Hsu, T.-T.; Lan, I.-W.; JUNG-HO CHENG |
| 臺大學術典藏 |
2018-09-10T07:31:08Z |
Energy management algorithm for a hybrid fuel cells scooter
|
Cheng, J.-H.; Yu, C.-Y.; Hsu, V.; JUNG-HO CHENG |
| 臺大學術典藏 |
2018-09-10T07:31:08Z |
Development of electric powertrain with a boost converter for the fuel cells plug-in electric scooter
|
Yu, C.Y.; Huang, M.-S.; Cheng, J.-H.; JUNG-HO CHENG |
| 臺大學術典藏 |
2018-09-10T07:31:08Z |
Displacement-based criterion for fracture analysis of fibrous composites
|
Cheng, Jung-Ho; Chang, Chao-Wang; JUNG-HO CHENG |
| 臺大學術典藏 |
2018-09-10T06:58:27Z |
Research on the Superplastic Forming (SPF) and Diffusion Bonding (DB) of aerospace materials
|
Chuang, Tung-Han; Cheng, Jung-Ho; Wang, Wen-Hsiung; Yang, Chih-Fu; Koo, Chun-Hao; JUNG-HO CHENG |
| 臺大學術典藏 |
2018-09-10T06:58:27Z |
Design, simulation, manufacture and strength characterization of SPF/DB parts
|
Cheng, Jung-Ho; Chen, Win-Je; Tang, Wei-Sen; Fengchiang, Shih-Bin; Hsiu, Gwo-Chu; Chang, Hong-Yu; JUNG-HO CHENG |
| 臺大學術典藏 |
2018-09-10T06:58:27Z |
AUTOMATIC ADAPTIVE REMESHING FOR FINITE ELEMENT SIMULATION OF FORMING PROCESSES.
|
JUNG-HO CHENG;Cheng, Jung-Ho;JUNG-HO CHENG; Cheng, Jung-Ho; JUNG-HO CHENG |
| 臺大學術典藏 |
2018-09-10T06:58:26Z |
Parametric deflection corrections of annualar sandwich panels under transverse central loads
|
Cheng, J.-H.; Chang, C.-K.; JUNG-HO CHENG |
| 臺大學術典藏 |
2018-09-10T06:58:26Z |
Innovatory designs for ducted wind turbines
|
Cheng, Jung-ho;Hu, Ssu-yuan;JUNG-HO CHENG;Cheng, Jung-ho;Hu, Ssu-yuan;Cheng, J.-H;Hu, S.-Y; Hu, S.-Y; Cheng, J.-H; Hu, Ssu-yuan; Cheng, Jung-ho; JUNG-HO CHENG; Hu, Ssu-yuan; Cheng, Jung-ho |
| 臺大學術典藏 |
2018-09-10T06:25:28Z |
Performance evaluation of pairing between sites and wind turbines
|
Hu, S.-y.; Cheng, J.-h.; Hu, Ssu-yuan; Cheng, Jung-ho; Hu, S.Y.; Cheng, J.H.; Hu, S.Y.; JUNG-HO CHENG; Hu, Ssu-yuan; Cheng, J.H.; Cheng, Jung-ho |
| 臺大學術典藏 |
2018-09-10T06:25:28Z |
Optimization of sandwich monocoque car body with equivalent shell element
|
Chang, C.-K.; Cheng, J.-H.; JUNG-HO CHENG |
| 臺大學術典藏 |
2018-09-10T05:53:38Z |
Forming limits prediction of the sheet metal forming process by the energy-based damage model
|
Yeh, H.-Y.; Cheng, J.-H.; JUNG-HO CHENG |
| 臺大學術典藏 |
2018-09-10T05:53:38Z |
The determination of material parameters from superplastic inflation tests
|
JUNG-HO CHENG;Cheng, Jung-Ho;Cheng, Jung-Ho;JUNG-HO CHENG;Cheng, Jung-Ho; Cheng, Jung-Ho; Cheng, Jung-Ho; JUNG-HO CHENG |
| 臺大學術典藏 |
2018-09-10T05:18:52Z |
Silicon-based high-frequency multiple-fourier horn ultrasonic nozzles for atomization and pumping
|
JUNG-HO CHENG;Cheng, J.H.;Chou, Y.F.;Tsai, S.C.;Song, Y.L.;Tsai, C.S.;JUNG-HO CHENG; Tsai, C.S.; Song, Y.L.; Tsai, S.C.; Chou, Y.F.; Cheng, J.H.; JUNG-HO CHENG |
| 臺大學術典藏 |
2018-09-10T05:18:52Z |
Development of the unlocking mechanisms for the complex method
|
Hu, S.-Y.; Cheng, J.-H.; Hu, S.Y.; Cheng, J.H.; Hu, S.Y.; JUNG-HO CHENG; Cheng, J.H. |
| 臺大學術典藏 |
2018-09-10T05:18:52Z |
A new forming-limit criterion for fracture prediction in a powder forging application
|
JUNG-HO CHENG;Cheng, J.-H.;Huang, C.-C.;JUNG-HO CHENG; Huang, C.-C.; Cheng, J.-H.; JUNG-HO CHENG |
| 臺大學術典藏 |
2018-09-10T05:18:52Z |
INCREMENTAL CONSTITUTIVE RELATION OF UNILATERAL CONTACT FRICTION FOR LARGE DEFORMATION ANALYSIS.
|
Cheng, J.-H.; Kikuchi, N.; JUNG-HO CHENG |
| 臺大學術典藏 |
2018-09-10T05:18:52Z |
Efficient atomization using MHz MEMS-based ultrasonic nozzles
|
Tsai, S.C.; Song, Y.L.; Chou, Y.F.; Cheng, J.H.; Tsai, C.S.; JUNG-HO CHENG |
| 臺大學術典藏 |
2018-09-10T05:18:51Z |
Ultrasonic atomiation using silicon-based high-frequency multiple-fourier horn nozzles
|
JUNG-HO CHENG;Tsai, C.S.;Song, Y.L.;Cheng, J.H.;Chou, Y.F.;Tsai, C.S.;Wang, N.;Song, Y.L.;Tsai, S.C.;JUNG-HO CHENG; Tsai, S.C.; Song, Y.L.; Wang, N.; Tsai, C.S.; Chou, Y.F.; Cheng, J.H.; Song, Y.L.; Tsai, C.S.; JUNG-HO CHENG |
| 臺大學術典藏 |
2018-09-10T04:49:52Z |
Analytical prediction of pressure-time curve for free inflation of superplastic sheet into hemispherical dome
|
JUNG-HO CHENG;Cheng, J.-H.;JUNG-HO CHENG; Cheng, J.-H.; JUNG-HO CHENG |
| 臺大學術典藏 |
2018-09-10T04:49:52Z |
A procedure for designing initial thickness variation for superplastic free inflation
|
Cheng, Jung-Ho;JUNG-HO CHENG;Cheng, J.-H.;Cheng, Jung-Ho;Cheng, Jung-Ho;JUNG-HO CHENG; Cheng, Jung-Ho; Cheng, J.-H.; JUNG-HO CHENG; Cheng, Jung-Ho |
| 臺大學術典藏 |
2018-09-10T04:49:51Z |
An investigation into the forming limits of sintered porous materials under different operational conditions
|
JUNG-HO CHENG;Cheng, J.-H.;Huang, C.-C.;JUNG-HO CHENG; Huang, C.-C.; Cheng, J.-H.; JUNG-HO CHENG |
| 臺大學術典藏 |
2018-09-10T04:29:39Z |
Study on welding residual distortions of parts in gas turbines
|
JUNG-HO CHENG;Cheng, J.-H.;Hu, S.-Y.;JUNG-HO CHENG; Hu, S.-Y.; Cheng, J.-H.; JUNG-HO CHENG |
