| 國立交通大學 |
2019-04-02T05:58:11Z |
Microstructure and Wear Property of As-cast Mg-2-wt.%-Sn Alloys after Different Heat Treatment Processes
|
Chen, Jung-Hsuan; Wang, Yi-Fung; Chao, Chuen-Guang; Liu, Tzeng-Feng |
| 國立交通大學 |
2018-08-21T05:53:58Z |
Stress Corrosion Behavior of Mg-2 mass% Sn Alloy by Equal-Channel Angular Extrusion
|
Chang, Pei-Shan; Chao, Chuen-Guang; Liu, Tzeng-Feng |
| 國立交通大學 |
2018-08-21T05:53:17Z |
Mechanical behavior and electrochemical stability of gas-nitrided FeMnAlC alloy in simulated body fluid
|
Hsueh, Shun-Jen; Huang, Jhen-Yi; Chao, Chuen-Guang; Juang, Jenh-Yih; Liu, Tzeng-Feng |
| 國立交通大學 |
2018-01-24T07:41:40Z |
熱滾軋鐵-30 wt.%錳-9.3 wt.%鋁-1.45 wt.%碳合金 顯微結構與機械性質
|
鄭鈺霖; 劉增豐; 朝春光; Cheng, Yu-Lin; Liu, Tzeng-Feng; Chao, Chuen-Guang |
| 國立交通大學 |
2018-01-24T07:38:52Z |
先進電子封裝技術無鉛銲錫與銅界面介金屬化合物的探討
|
鄭錫圭; 劉增豐; 王英郎; Cheng,Hsi-Kuei; Liu, Tzeng-Feng; Wang, Ying-Lang |
| 國立交通大學 |
2018-01-24T07:37:58Z |
鐵-30wt.%錳-10wt.%鋁-0.9wt.%碳熱軋合金顯微結構和機械性質之研究
|
顏士勛; 劉增豐; Yen, Shih-Hsun; Liu, Tzeng-Feng |
| 國立交通大學 |
2018-01-24T07:37:58Z |
鐵-30wt.%錳-7wt.%鋁-1.2wt.%碳經離子氮化後其機械性質與在仿人體液中之抗腐蝕性研究
|
張仲平; 劉增豐; Chang, Chung-Ping; Liu, Tzeng-Feng |
| 國立交通大學 |
2018-01-24T07:37:58Z |
鐵-30wt.%錳-10wt.%鋁-1.0wt.%碳氣體氮化後其 機械性質和在⼈體模擬液中之抗腐蝕性研究
|
黃振益; 劉增豐; Huang, Jhen-Yi; Liu, Tzeng-Feng |
| 國立交通大學 |
2017-04-21T06:56:32Z |
INVESTIGATING MICROSTRUCTURES AND HIGH TEMPERATURE SUPERPLASTICITY BEHAVIOR OF MG-5(MASS%) SN ALLOY BY USING EQUAL CHANNEL ANGULAR EXTRUSION
|
Tsai, Hao-Jan; Kuo, Chin-Guo; Chao, Chuen-Guang; Liu, Tzeng-Feng |
| 國立交通大學 |
2017-04-21T06:56:30Z |
Microstructural Evolution of Cu/Solder/Cu Pillar-Type Structures with Different Diffusion Barriers
|
Cheng, Hsi-Kuei; Lin, Yu-Jie; Chen, Chih-Ming; Liu, Kuo-Chio; Wang, Ying-Lang; Liu, Tzeng-Feng |
| 國立交通大學 |
2016-03-29T00:01:11Z |
史賓諾多新沃斯田鐵型鐵錳鋁碳合金之軋板和鑄件氮化處理、相變化、機械性質與抗腐蝕性研究
|
劉增豐; LIU TZENG-FENG |
| 國立交通大學 |
2016-03-28T08:17:49Z |
史賓諾多新沃斯田鐵型鐵錳鋁碳合金之軋板和鑄件氮化處理、相變化、機械性質與抗腐蝕性研究
|
劉增豐; LIU TZENG-FENG |
| 國立交通大學 |
2015-11-26T01:06:48Z |
鐵-9鋁-30錳-6鉻-1.8碳合金之顯微結構與抗腐蝕性質
|
王喬立; Wang, Chiao-Li; 劉增豐; 朝春光; Liu, Tzeng-Feng; Chao, Cheun-Guang |
| 國立交通大學 |
2015-11-26T01:04:02Z |
溶膠凝膠法製備InGaZnO4透明導電薄膜的光電性質研究
|
邱柏叡; Chiu, Po-Jui; 劉增豐; 朝春光; Liu, Tzeng-Feng; Chao, Cheun-Guang |
| 國立交通大學 |
2015-11-26T00:56:48Z |
鐵-30wt.%錳-9wt.%鋁-1.5 wt.%碳合金鑄件顯微結構與其機械性質之研究
|
劉建寶; Liu,Chien-Bao; 劉增豐; Liu,Tzeng-Feng |
| 國立交通大學 |
2015-11-26T00:56:03Z |
氣體氮化及熱滾軋對鐵鋁錳碳合金機械性質與微觀結構之研究
|
陳永昌; Chen, Yung-Chang; 劉增豐; 朝春光; Liu, Tzeng-Feng; Chao, Chuen-Guang |
| 國立交通大學 |
2015-11-26T00:55:29Z |
金屬(鋁、鎳)誘導非晶矽側向結晶之研究
|
黃世陽; Huang, Shih-Yang; 劉增豐; Liu, Tzeng-Feng |
| 國立交通大學 |
2015-07-21T11:20:55Z |
A quenching method for the preparation of metal oxide-polythiophene composites having fiber structures
|
Lu, Fang-Hsien; Mohamed, Mohamed-Gamal; Liu, Tzeng-Feng; Chao, Chuen-Guang; Dai, Lizong; Kuo, Shiao-Wei |
| 國立交通大學 |
2015-07-21T08:29:25Z |
Unusual Morphological Evolution of the Cu Pillar/Solder Micro-joints During High-Temperature Annealing
|
Cheng, Hsi-Kuei; Lin, Yu-Jie; Chang, Hou-Chien; Liu, Kuo-Chio; Wang, Ying-Lang; Liu, Tzeng-Feng; Chen, Chih-Ming |
| 國立交通大學 |
2015-07-21T08:29:22Z |
Excellent enhancement of corrosion properties of Fe-9Al-30Mn-1.8C alloy in 3.5% NaCl and 10% HCl aqueous solutions using gas nitriding treatment
|
Chen, Yung-Chang; Lin, Chih-Lung; Chao, Chuen-Guang; Liu, Tzeng-Feng |
| 國立交通大學 |
2015-07-21T08:28:57Z |
Interfacial reactions between Cu and SnAgCu solder doped with minor Ni
|
Cheng, Hsi-Kuei; Huang, Chin-Wen; Lee, Hsuan; Wang, Ying-Lang; Liu, Tzeng-Feng; Chen, Chih-Ming |
| 國立交通大學 |
2015-07-21T08:28:00Z |
Effect of phosphate surface pretreatment on corrosion resistance and adhesion of PI coating on Mg-5 wt.% Sn alloy
|
Lee, Hsiao-Chien; Huang, Yi-Chia; Liu, Tzeng-Feng; Whang, Wha-Tzong; Chao, Chuen-Guang |
| 國立交通大學 |
2014-12-16T06:16:07Z |
Low-density high-toughness alloy and the fabrication method thereof
|
Liu, Tzeng-Feng; Lee, Jian-Wei |
| 國立交通大學 |
2014-12-16T06:16:04Z |
High strength and high toughness alloy with low density and the method of making
|
Liu, Tzeng-Feng; Lee, Jian-Wei |
| 國立交通大學 |
2014-12-16T06:15:55Z |
Low-density alloy and fabrication method thereof
|
Liu, Tzeng-Feng; Lee, Jian-Wei |
