| 國立高雄第一科技大學 |
2016.04 |
An investigation into the aspheric ultraprecision machining using the response surface methodology
|
Liu, Yung-Tien;Zhang, L. C. |
| 國立高雄第一科技大學 |
2014 |
Numerical Study of a 3-Axis Stage for Application of Fast Tool Servo
|
Liu, Yung Tien;Li, Bo Jheng |
| 國立高雄第一科技大學 |
2013.11 |
Development of Data Acquisition System for Examination of Grinding Performance
|
Liu, Yung Tien;Li, Bo Jheng;Chiu, Neng Hsin;Huang, Han Ju |
| 國立高雄第一科技大學 |
2013.07 |
Contact-Type Profile Measuring Device Using Laser Interferometry System Incorporating Hybrid Actuating System
|
Liu, Yung-Tien;Wu, Han-Lin;Wang, Je-Yi;Yamagata, Yutaka |
| 國立高雄第一科技大學 |
2013.07 |
Observer-based adaptive sliding mode control for pneumatic servo system
|
Liu, Yung-Tien;Kung, Tien-Tsai;Chang, Kuo-Ming;Chen, Sheng-Yuan |
| 國立高雄第一科技大學 |
2013.06 |
Observer-Based Adaptive Sliding Mode Control for Uncertain Systems with Dead-Zone Input
|
郭昱廷;康耀鴻;張國明;劉永田; Kuo, Yu-Ting;Kang, Yaw-Hong;Chang, Kuo-Ming;Liu, Yung-Tien |
| 國立高雄應用科技大學 |
2013 |
Observer-based adaptive sliding mode control for pneumatic servo system
|
Liu, Yung-Tien; Kung, Tien-Tsai; Chang, Kuo-Ming; Chen, Sheng-Yuan |
| 國立高雄第一科技大學 |
2011.11 |
Study of a Precision Pneumatic Positioning Device Using PZT Dither
|
Liu, Yung-Tien;Chang, Kuo-Ming;Lee, Huang-Ren; 劉永田 |
| 國立高雄第一科技大學 |
2011.06 |
Characteristic Study on Micro Aspheric Surface Using Diamond Tool Cutting
|
Liu, Yung Tien;Chang, Wei Che; 劉永田 |
| 國立高雄第一科技大學 |
2010.08 |
Experimental Study on Milling Hardened SKD Steel Using Micro CBN Ball-End Mills
|
Liu, Yung Tien;Chiu, Neng Hsin;Lin, Yen Chun;Lai, Chih Liang;Lin, Yu Fu;Chiu, Hung Hsiang; 邱能信 |
| 國立高雄第一科技大學 |
2010.07 |
Precision positioning device using the combined piezo-VCM actuator with frictional constraint
|
Liu, Yung-Tien;Li, Bo-Jheng; 劉永田 |
| 國立高雄第一科技大學 |
2010.03 |
壓電式半主動隔震系統於設備防震之應用
|
盧煉元;陳乙震;林錦隆;劉永田; Lu, Lyan-Ywan;Chen, Yi-Zhen;Lin, Ging-Long;Liu, Yung-Tien |
| 國立高雄第一科技大學 |
2010.01 |
Model reference adaptive control for a piezo-positioning system
|
Liu, Yung-Tien;Chang, Kuo-Ming;Li, Wen-Zen; 劉永田 |
| 國立高雄應用科技大學 |
2010 |
Model reference adaptive control for a piezo-positioning system
|
Liu, Yung-Tien; Chang, Kuo-Ming; Li, Wen-Zen |
| 國立高雄第一科技大學 |
2009.08 |
不確定非線性系統之基于觀測器適應控制
|
張國明;劉永田; Chang, Kuo-Ming;Liu, Yung-Tien |
| 國立高雄第一科技大學 |
2009.08 |
One-DOF Precision Position Control using the Combined Piezo-VCM Actuator
|
Liu, Yung-Tien;Wang, Chun-Chao |
| 國立高雄第一科技大學 |
2009.06 |
Fabrication of aspheric surface using ultraprecision cutting and BMG molding
|
Pan, Cheng-Tang;Wu, Tsung-Tien;Liu, Yung-Tien;Y.Yamagata;J.C.Huang; 劉永田 |
| 國立高雄第一科技大學 |
2007.07 |
Pneumatic actuating device with nanopositioning ability utilizing PZT impact force coupled with differential pressure
|
Liu, Yung-Tien;Jiang, Chia-Chi; 劉永田 |
| 國立高雄第一科技大學 |
2007.02 |
Application of the Nonlinear, Double-Dynamic Taguchi Method to the Precision Positioning Device Using Combined Piezo-VCM Actuator
|
Liu, Yung-Tien;Fung, Rong-Fong;Wang, Chun-Chao; 馮榮豐 |
| 國立高雄第一科技大學 |
2005.12 |
Dynamic model of an electromagnetic actuator for vibration control of a cantilever beam with a tip mass
|
Fung, Rong-Fong;Liu, Yung-Tien;Wang, Chun-Chao; 馮榮豐 |
| 國立高雄第一科技大學 |
2005.12 |
Micropositioning device using impact force of piezoelectric flying wires
|
Liu, Yung-Tien;Yamagata, Y.;Higuchi, T.; 劉永田 |
| 國立高雄第一科技大學 |
2005.10 |
Precision position control using combined piezo-VCM actuators
|
Liu, Yung-Tien;Fung, Rong-Fong;Wang, Chun-Chao; 劉永田 |
| 國立高雄第一科技大學 |
2004.07 |
Dynamic responses of a precision positioning table impacted by a soft-mounted piezoelectric actuator
|
Liu, Yung-Tien;Fung, Rong-Fong;Huang, Tai-Kun; 劉永田;馮榮豐 |
| 國立高雄第一科技大學 |
2004.06 |
A PNEUMATIC POSITIONING DEVICE COUPLED WITH PIEZOELECTRIC SELF-MOVING MECHANISM
|
Liu, Yung-Tien;Lee, Chen-Hao;Fung, Rong-Fong; 劉永田;馮榮豐 |
| 國立高雄第一科技大學 |
2003/06/16 |
Multi-degree-of-freedom of precision positioning device using spring-mounted electromechanical actuators
|
Liu, Yung-Tien; Fung, Rong-Fong; Wang, Jiunn-Chau; 劉永田; 馮榮豐 |
| 國立高雄第一科技大學 |
2003.12 |
Dynamic Responses of a Self-Moving Precision Positioning Stage Impacted by a Spring-Mounted Piezoelectric Actuator
|
Fung, Rong-Fong;Higuchi, Toshiro;Liu, Yung-Tien;Huang, Tai-Kun; 劉永田;馮榮豐 |
| 國立高雄第一科技大學 |
2003.01 |
A novel precision positioning table utilizing impact force of spring-mounted piezoelectric actuator—part I: experimental design and results
|
Liu, Yung-Tien;Higuchi, Toshiro;Fung, Rong-Fong; 馮榮豐 |
| 國立高雄第一科技大學 |
2003.01 |
A novel precision positioning table utilizing impact force of spring-mounted piezoelectric actuator—part II: theoretical analysis
|
Liu, Yung-Tien;Higuchi, Toshiro;Fung, Rong-Fong; 劉永田;馮榮豐 |
| 國立高雄第一科技大學 |
2001.12 |
Precision positioning device utilizing impact force of combined piezo-pneumatic actuator
|
Liu, Yung-Tien;Higuchi, T.; 劉永田 |
| 國立高雄第一科技大學 |
2001.01 |
Precision Positioning Device Utilizing Combined Piezo-VCM Actuator
|
劉永田;樋口俊郎; LIU, Yung-Tien;HIGUCHI, Toshiro |
