| 淡江大學 |
2023-07-11 |
Development and Validation of the Online Learning Experience Scale (OLES)
|
Pan, Ai-Jou;Pan, Wen-Fung;Lai, Chin-Feng |
| 國立臺灣科技大學 |
2019-09 |
CYCLIC BENDING DEGRADATION AND FAILURE OF LOCAL SHARP-DENTED 6061-T6 ALUMINUM ALLOY TUBES WITH DIFFERENT DIAMETER-TO-THICKNESS RATIOS
|
Lee, Kuo-Long;Yu, Shu-Fei;Chen, Yu-An;Pan, Wen-Fung |
| 國立臺灣科技大學 |
2017-09 |
EXPERIMENTAL AND FINITE ELEMENT INVESTIGATION ON THE BEHAVIOR OF LOCAL SHARP-NOTCHED CIRCULAR TUBES UNDER CYCLIC BENDING
|
Lee, Kuo-Long;Chung, Chen-Cheng;Pan, Wen-Fung |
| 國立成功大學 |
2016-12 |
Growing and critical ovalization for sharp-notched 6061-T6 aluminum alloy tubes under cyclic bending
|
Lee, Kuo-Long; Chung, Chen-Cheng; Pan, Wen-Fung |
| 國立成功大學 |
2016-11 |
Finite element analysis on the response of 6061-T6 aluminum alloy tubes with a local sharp cut under cyclic bending
|
Chung, Chen-Cheng; Lee, Kuo-Long; Pan, Wen-Fung |
| 國立成功大學 |
2016-11 |
Failure life estimation of sharp-notched circular tubes with different notch depths under cyclic bending
|
Lee, Kuo-Long; Chang, Kao-Hua; Pan, Wen-Fung |
| 國立成功大學 |
2016-09 |
Collapse of Sharp-Notched 6061-T6 Aluminum Alloy Tubes Under Cyclic Bending
|
Chung, Chen-Cheng; Lee, Kuo-Long; Pan, Wen-Fung |
| 國立成功大學 |
2016-01 |
Collapse of elliptical-notched circular tubes under cyclic bending
|
Lee, Kuo-Long; Chang, Kao-Hua; Pan, Wen-Fung |
| 國立臺灣科技大學 |
2014-12 |
有限元素分析圓管承受無或有外壓循環彎曲負載下之行為
|
李國龍; 徐建民; 潘文峰; Lee, Kuo-Long;Hsu, Chien-Min;Pan, Wen-Fung |
| 國立成功大學 |
2013-12 |
Viscoplastic collapse of sharp-notched circular tubes under cyclic bending
|
Lee, Kuo-Long; Hsu, Chien-Min; Pan, Wen-Fung |
| 國立成功大學 |
2013-10 |
The Influence of Mean Curvature on the Collapse of Sharp-Notched Circular Tubes under Cyclic Bending
|
Lee, Kuo-Long; Hsu, Chien-Min; Pan, Wen-Fung |
| 國立成功大學 |
2012-04 |
Investigation of Contact Behavior and Design of Vertical Probe for Wafer Level Probing
|
Chang, Hao-Yuan; Pan, Wen-Fung; Lin, Shueei-Muh |
| 國立成功大學 |
2011-04 |
Experimental and theoretical investigation of needle contact behavior of wafer level probing
|
Chang, Hao-Yuan; Pan, Wen-Fung; Lin, Shueei-Muh |
| 國立成功大學 |
2011 |
CCD digital camera system for measuring curvature and ovalization of each cross-section of circular tube under cyclic bending
|
Lee, Kuo-Long;Hung, Chao-Yu;Pan, Wen-Fung |
| 國立成功大學 |
2009-01-15 |
Buckling life estimation of circular tubes under cyclic bending
|
Chang, Kao-Hua; Pan, Wen-Fung |
| 國立成功大學 |
2009 |
Endochronic Simulation for Thermal Viscoplastic and Creep Deformation
|
Lee, Kuo-Long; Chang, Hao-Yuan; Pan, Wen-Fung |
| 國立成功大學 |
2008-03-30 |
Mean moment effect on circular thin-walled tubes under cyclic bending
|
Chang, Kao-Hua; Pan, Wen-Fung; Lee, Kuo-Long |
| 國立成功大學 |
2006-06 |
High-performance stress-induced micromachined optical switch with multiswitching function using seesaw structure
|
Kuo, Ju-Nan; Lee, Gwo-Bin; Pan, Wen-Fung |
| 國立虎尾科技大學 |
2006 |
High-Performance Stress-Induced Micromachined Optical Switch with Multiswitching Function Using Seesaw Structure
|
Kuo, Ju-Nan;Lee, Gwo-Bin;Pan, Wen-Fung |
| 國立成功大學 |
2005-10 |
Viscoplastic response and collapse of 316L stainless steel tubes under cyclic bending
|
Chang, K. H.; Hsu, C. M.; Sheu, S. R.; Pan, Wen-Fung |
| 國立成功大學 |
2005-10 |
Three-dimensional optical focusing systems utilizing stress-induced bending of concave micromirrors
|
Kuo, Ju-Nan; Lee, Gwo-Bin; Pan, Wen-Fung; Lee, Huei-Huang |
| 國立成功大學 |
2005-05 |
Shape and thermal effects of metal films on stress-induced bending of micromachined bilayer cantilever
|
Kuo, Ju-Nan; Lee, ?Gwo-Bin; Pan, Wen-Fung; Lee, Huei-Huang |
| 國立成功大學 |
2005-01 |
Projection display technique utilizing three-color-mixing waveguides and microscanning devices
|
Kuo, Ju-Nan; Lee, Gwo-Bin; Pan, Wen-Fung |
| 國立成功大學 |
2005 |
Surface-micromachined optical interferometry system utilizing three-dimensional micromirrors and microgratings
|
Kuo, Ju-Nan; Lee, Gwo-Bin; Pan, Wen-Fung |
| 東方設計學院 |
2004-09-02 |
Cyclic Bending of 316L Stainless Steel Tubes
|
Kuo, Ju-Nan; Pan, Wen-Fung; Hsu, Chien-Min; 徐建民; (東方技術學院美術工藝系) |
| 國立成功大學 |
2004-09 |
A high-speed low-voltage double-switch optical crossconnect using stress-induced bending, micromirrors
|
Kuo, Ju-Nan; Lee, Gwo-Bin; Pan, Wen-Fung |
| 國立成功大學 |
2004-04 |
Experimental and theoretical evaluations of the effect between diameter-to-thickness ratio and curvature-rate on the stability of circular tubes under cyclic bending
|
Lee, Kuo-Long; Pan, Wen-Fung; Hsu, Chien-Min |
| 東方設計學院 |
2004 |
Experimental and Theoretical Evaluations of the Effect between Diameter-to-Thickness Ratio and Curvature-Rate on the Stability of Circular Tubes under Cyclic Bending
|
Lee, Kuo-Long; Pan, Wen-Fung; Hsu, Chien-Min; 徐建民; (東方技術學院美術工藝系) |
| 國立成功大學 |
2002-12 |
Pure bending creep of SUS 304 stainless steel tubes
|
Lee, Kuo-Long; Pan, Wen-Fung |
| 國立成功大學 |
2002-04-15 |
The effect of mean curvature on the response and collapse of thin-walled tubes under cyclic bending
|
Pan, Wen-Fung; Lee, Kuo-Long |
| 國立成功大學 |
2001-04 |
The influence of the diameter-to-thickness ratio on the stability of circular tubes under cyclic bending
|
Lee, Kuo-Long; Pan, Wen-Fung; Kuo, Ju-Nan |
| 國立成功大學 |
2001-03 |
Viscoplastic collapse of titanium alloy tubes under cyclic bending
|
Lee, Kuo-Long; Pan, Wen-Fung |
| 國立成功大學 |
1999-07 |
Endochronic analysis for rate-dependent elasto-plastic deformation
|
Pan, Wen-Fung; Wang, Chieh-Kuen |
| 國立成功大學 |
1999-05 |
Viscoplastic analysis of thin-walled tubes under cyclic bending
|
Pan, Wen-Fung; Hsu, C. M. |
| 國立成功大學 |
1998-06 |
A curvature-ovalization measurement apparatus for circular tubes under cyclic bending
|
Pan, Wen-Fung; Wang, T. R.; Hsu, C. M. |
| 國立成功大學 |
1998-04 |
Endochronic prediction for the mechanical ratchetting of a stepped beam subjected to steady tension and cyclic bending
|
Pan, Wen-Fung; Yang, Y. S.; Lu, J. K. |
| 國立成功大學 |
1998-04 |
Endochronic simulation for multiaxial creep
|
Pan, Wen-Fung; Chiang, Wu-Jiunn |
