|
"peng h s"的相關文件
顯示項目 1-10 / 15 (共2頁)
1 2 > >>
每頁顯示[10|25|50]項目
| 國立成功大學 |
2023 |
Correlation Between Fiber Orientation and Geometrical Shrinkage of Injected Parts Under the Influence of Flow-Fiber Coupling Effect
|
Huang, C.-T.;Wang, J.-Z.;Lai, C.-H.;Hwang, S.-J.;Huang, P.-W.;Peng, H.-S. |
| 國立成功大學 |
2023 |
Study on the Flow, Foaming Characteristics and Structural Strength of Polypropylene Structural Foam Injection Molding by Innovative Nitrogen and Molten Plastic Mixing Mechanism
|
Huang, P.-W.;Peng, H.-S.;Hwang, S.-J.;Huang, C.-T. |
| 國立成功大學 |
2022 |
Influence of back pressure and geometry on microstructure of injection-molded long-glass-fiber-reinforced polypropylene ribbed plates
|
Wang, K.-H.;Chen, Y.-T.;Hwang, S.-J.;Huang, C.-T.;Peng, H.-S. |
| 國立成功大學 |
2022 |
Optimization process parameters and adaptive quality monitoring injection molding process for materials with different viscosity
|
Su, C.-W.;Su, W.-J.;Cheng, F.-J.;Liou, G.-Y.;Hwang, S.-J.;Peng, H.-S.;Chu, H.-Y. |
| 國立成功大學 |
2022 |
Correlation Between Fiber Orientation and Geometrical Shrinkage of Injected Parts Under the Influence of Flow-Fiber Coupling Effect
|
Huang, C.-T.;Wang, J.-Z.;Lai, C.-H.;Hwang, S.-J.;Huang, P.-W.;Peng, H.-S. |
| 國立成功大學 |
2022 |
Nozzle Pressure and Clamping Force Based Injection Molding Process Parameter Optimization and Adaptive Process Quality Control
|
Liou, G.-Y.;Cheng, F.-J.;Su, W.-J.;Hwang, S.-J.;Peng, H.-S.;Chu, H.-Y. |
| 國立成功大學 |
2021 |
The low breaking fiber mechanism and its effect on the behavior of the melt flow of injection molded ultra-long glass fiber reinforced polypropylene composites
|
Huang, P.-W.;Peng, H.-S.;Hwang, S.-J.;Huang, C.-T. |
| 國立成功大學 |
2021 |
Influence of low-fracture-fiber mechanism on fiber/melt-flow behavior and tensile properties of ultra-long-glass-fiber-reinforced polypropylene composites injection molding
|
Huang, P.-W.;Peng, H.-S.;Hwang, S.-J.;Huang, C.-T. |
| 國立成功大學 |
2021 |
Study on the flow-fiber coupling effect and its influence on the shrinkage of fiber-reinforced plastic (frp) injection parts
|
Lai, C.-H.;Huang, C.-T.;Chu, J.-H.;Fu, W.-W.;Hwang, S.-J.;Peng, H.-S.;Wu, C.-C.;Tu, C.-I. |
| 國立成功大學 |
2019 |
Study on the influences on fiber micro-structure variations and the connection to final shrinkage/warpage on long fiber reinforced thermoplastics (FRT) parts
|
Huang, C.-T.;Hsu, C.;Yeh, C.-E.;Chen, Y.-S.;Hwang, S.-J.;Peng, H.-S.;Wu, C.-C.;Tu, C.-I. |
顯示項目 1-10 / 15 (共2頁)
1 2 > >>
每頁顯示[10|25|50]項目
|
