|
"pong s h"的相关文件
显示项目 1-8 / 8 (共1页)
1
每页显示[10|25|50]项目
| 國立臺灣科技大學 |
2017 |
Effect of nano-BaTiO3 on thermal, mechanical, and electrical properties of HDDA/TPA photopolymer prepared by a digital light processor RP machine
|
Wicaksono, S.T.;Chiu, S.-H.;Chen, K.-T.;Pong, S.-H. |
| 國立臺灣科技大學 |
2017 |
Multi-objective optimization of process parameters in an area-forming rapid prototyping system using the Taguchi method and a grey relational analysis
|
Chiu, S.-H.;Gan, S.-Y.;Tseng, Y.-C.;Chen, K.-T.;Chen, Chen C.-C.;Su, C.-H.;Pong, S.-H. |
| 國立臺灣科技大學 |
2016 |
Thermal and mechanical properties of copper/photopolymer composite
|
Chiu, S.-H;Wu, C.-L;Gan, S.-Y;Chen, K.-T;Wang, Y.-M;Pong, S.-H;Takagi, H. |
| 國立臺灣科技大學 |
2016 |
Joint position-based impedance control with load compensation for robot arm
|
Chiu, S.-H;Chen, Chen C.-C;Chen, K.-T;Huang, X.-J;Pong, S.-H. |
| 國立臺灣科技大學 |
2015 |
Mechanical and thermal properties of photopolymer/CB (carbon black) nanocomposite for rapid prototyping
|
Chiu, S.-H.;Wicaksono, S.T.;Chen, K.-T.;Chen, C.-Y.;Pong, S.-H. |
| 國立臺灣科技大學 |
2015 |
Process parameters optimization for area-forming rapid prototyping system
|
Chiu, S.-H.;Chen, K.-T.;Wicaksono, S.T.;Tsai, J.-R.;Pong, S.-H. |
| 國立臺灣科技大學 |
2014 |
Morphology and properties of a photopolymer/clay nanocomposite prepared by a rapid prototyping system
|
Chiu, S.-H.;Wicaksono, S.T.;Chen, K.-T.;Pong, S.-H. |
| 國立臺灣科技大學 |
2013 |
A framework of barcode localization for mobile robots
|
Chen, C.-C.;Chiu, S.-H.;Lee, J.-H.;Chen, S.-Y.;Pong, S.-H.;Lu, C.-P. |
显示项目 1-8 / 8 (共1页)
1
每页显示[10|25|50]项目
|
