臺灣學術機構典藏系統 (Taiwan Academic Institutional Repository, TAIR)

关于TAIR
	计画说明

浏览
	典藏机构
	作者
	题名
	日期
	统计图表
	机构即时统计
	学术趋势

消息
	2019臺灣學術機構典藏研討會
	機構典藏系統RC7版本已發佈

著作权
	出版社及期刊政策查询
	TAIR著作权会议记录

相关连结
	機構典藏計畫網站
	ROAR
	OpenDOAR
	SHERPA
	OAIster
	JAIRO
	Ira
	DSPACE
	RWWR
	臺大學術典藏NTU Scholars

"shia chung chen"的相关文件

回到依作者浏览
依题名排序	依日期排序

显示项目 1-25 / 30 (共2页)
1 2 > >>
每页显示[10|25|50]项目

机构	日期	题名	作者
中原大學	2006-01	Effect of Organoclay on the Thermal Stability, Mechanical Strength, and Surface Wettability of Injection-Molded ABS-Clay Nanocomposite Materials Prepared by Melt Intercalation	Jui-Ming Yeh;Chi-Lun Chen;Chao-Chen Huang;Fang-Chia Chang;Shia-Chung Chen;Pao-Lin Su;Chih-Che Kuo;Jui-Ting Hsu;Boyang Chen;Yuan-Hsiang Yu
中原大學	2006-01	The Geometrical Effects of Bumps on the Fatigue Life of Flip-chip Packages by Taguchi Method	Wen-Ren Jong;Shia-Chung Chen;Hsin-Chun Tsai;Chien-Chia Chiu;Hsiu-Tao Chang
中原大學	2005	3D Numerical Simulation of Transient Temperature Field For Lens Mold Embedded with Heaters	Yu-Wan Lin;Hai-Mei Li;Shia-Chung Chen;Chang-Yu Shen
中原大學	2004	Investigations on the Weldline Tensile Strength of Thin-Wall Injection Molded Parts	Rean Der Chien;Shia-Chung Chen;Hsin-Shu Peng;Pao-Lin Su;Chun-Sheng Chen
中原大學	2004	Study on the Molding Characteristics and Mechanical Properties of Injection-Molded Foaming Polypropylene Parts	Rean Der Chien;Shia-Chung Chen;Ping-Hui Lee;Jien-Sheng Huang
中原大學	2004	Surface Visual quality of Gas-Assisted Injection Molded ABS Parts with various Gas Channel Designs	Shia-Chung Chen;Ming-Chung Lin;Rean Der Chien;Chun-Sheng Chen;Min-Yu Teng
中原大學	2004	Surface Visual Quality of Gas-Assisted injection Molded ABS Parts with Various Gas Channel Designs	Shia-Chung Chen;Ming-Chung Lin;Rean Der Chien;Chun-Sheng Chen;Min-Yu Teng
中原大學	2003	Effect of Gas Channel Design on the Molding Window of Gas-Assisted-Injection-Molded Polystyrene Parts	Rean Der Chien;Shia-Chung Chen;Ming-Chung Lin;Ping-Hui Lee;Chun-Sheng Chen
中原大學	2003	Investigation of Mold Plate Separation in Thin-Wall Injection Molding	Shia-Chung Chen;Wei-Liang Liaw;Pao-Lin Su;Ming-Hsiu Chung
中原大學	2003	Investigations of the Tensile Properties on Polycarbonate Thin-Wall Injection Molded Parts	Shia-Chung Chen;Ming-Shiu Chung;Hsin-Shu Peng;Lei-Ti Huang
中原大學	2003	Sequential Injection Molding Using Fast-Response Valve Gate System	Shia-Chung Chen;L. T. Huang;Pao-Lin Su
中原大學	2002	Characteristics of Mould Separation and Its Effects on Qualities of Thin Wall Injection Moulded Parts	Shia-Chung Chen;Wei-Lianq Liaw;Hsin-Shu Peng;Lei-Ti Huang;Yi-Fong Chang
中原大學	2002	Fast-Response Pressure Regulation System For Thin-Wall Gas-Assisted Injection Molding	Shia-Chung Chen;Shih-Ming Wang;Wei-Lianq Liu
中原大學	2002	Simulation of Injection-Compression Molding Process, Part 3: Effect of Process Conditions on Part Birefringence	Shia-Chung Chen;Yung-Cheng Chen;Hsin-Shu Peng;Lei-Ti Huang
中原大學	2002	Simulations on Structure Performance of 3C Thin-Wall Injection-Molded Parts	Shia-Chung Chen;Hsing-Ling Wang;Juan-Po Chen;Hsin-Shu Peng
中原大學	2001	Integrated Simulations of Gas Injection Molding Process and Part structural Performance Under a Unified CAE Model	Shia-Chung Chen;Sheng Yan Hu;Yeon-Pun Chang
中原大學	2001	Integrated Simulations of Gas Injection Molding Process and Part structural Performance Under a Unified CAE Model	Shia-Chung Chen;Sheng Yan Hu;Yeon-Pun Chang
中原大學	2000	Dynamic Modeling of a Gas Pressure Control System for a Gas-Assisted Injection Molding Process	Sher-Meng Chao;Shih-Ming Wang;Shia-Chung Chen
中原大學	2000	Simulation of a Mold-Cooling Process for Gas-Assisted Injection Molded Parts Designed With a Top Rib on the Gas Channel	Shia-Chung Chen;Sheng-Yan Hu;Sher-Meng Chao;Rean-Der Chien
中原大學	2000	Simulation of Injection-Compression-Molding Process. II. Influence of Process Characteristics on Part Shrinkage	Shia Chung Chen;Yung Chung Chen;Hsin Shu Peng
中原大學	1999	Analyses and Measurements on Bending Performance of Gas-Assisted Injection Molded Parts	Shia-Chung Chen;Sheng-Yan Hu;Rean Der Chien;Ming Chang Jeng
中原大學	1999	Closed-Loop Control of Gas Pressure in the Gas-Assisted Injection Molding Process	Shia-Chung Chen;Sher-Meng Chao
中原大學	1999	Evaluation of Gas Pressure Dynamics for Gas-Assisted Injection Molding Process	Sher-Meng Chao;Shih-Ming Wang;Shia-Chung Chen;Furong Gao
中原大學	1999	Investigation on Process Characteristics and Application of Injection-Compression Molding Process	Shia-Chung Chen;Yung-Chung Chen;Lei-Ti Huang;Hsin-Shu Peng
中原大學	1999	Investigations on the Impact Performance of Gas-Assisted Injection Molded Polystyrene Parts	Rean Der Chien;Ching-Kuo Cheng;Shia-Chung Chen;Hsien-Yang Yeh

显示项目 1-25 / 30 (共2页)
1 2 > >>
每页显示[10|25|50]项目

	English \| 正體中文 \| 简体中文 \| 总笔数 :2822924
	造访人次 : 30049017 在线人数 : 1054 教育部委托研究计画计画执行:国立台湾大学图书馆