| 國立成功大學 |
2013-08 |
Developing digital image correlation techniques for using water immersion to improve strain field measurement in micro-scale
|
Shih, Ming-Hsiang; Kuo, Jui-Chao; Sung, Wen-Pei; Tung, Shih-Heng |
| 國立高雄第一科技大學 |
2012.01 |
An experimental study on a generalized Maxwell model for nonlinear viscoelastic dampers used in seismic isolation
|
Lu, Lyan-Ywan;Lin, Ging-Long;Shih, Ming-Hsiang |
| 國立高雄大學 |
2011-07 |
Precision Verification of a Simplified Three-Dimensional DIC Method
|
童士恒; Shih, Ming-Hsiang |
| 國立高雄大學 |
2010-06 |
Characterization of Indentation-Induced Pattern Using Full-Field Strain Measurement
|
Kuo, Jui-Chao; 童士恒; Shih, Ming-Hsiang; Lu, Yan-Yu |
| 國立高雄大學 |
2010-05 |
Application of digital image correlation for anisotropic plastic deformation during tension testing
|
童士恒; Shih, Ming-Hsiang; Kuo, Jui-Chao |
| 國立高雄大學 |
2008-12 |
Development of Digital Image Correlation Method to Analyze Crack Variations of Masonry Wall
|
童士恒; Shih, Ming-Hsiang; Sung, Wen-Pei |
| 國立勤益科技大學 |
2008-10 |
Testing and Modeling for Energy Dissipation Behavior of Velocity and Displacement Dependent Hydraulic Damper
|
Sung,Wen-Pei; Shih, Ming-Hsiang |
| 國立勤益科技大學 |
2008-10 |
Testing and Modeling for Energy Dissipation Behavior of Velocity and Displacement Dependent Hydraulic Damper
|
Sung, Wen-Pei; Shih, Ming-Hsiang |
| 國立高雄大學 |
2008-09 |
Application of the Digital-Image-Correlation Technique to Measure the Deformation of a Seismic Retrofitted Column of a Two-Storey Building
|
童士恒; Shih, Ming-Hsiang; Yang, Yuan-Sen |
| 國立高雄大學 |
2008-06 |
Prediction of the orientation spread in an aluminum bicrystal during plane strain compression using a DIC-based Taylor model
|
Kuo, Jui-Chao; Chen, Delphic; 童士恒; Shih, Ming-Hsiang |
| 國立成功大學 |
2008-06 |
Prediction of the orientation spread in an aluminum bicrystal during plane strain compression using a DIC-based Taylor model
|
Kuo, Jui-Chao; Chen, Delphic; Tung, Shih-Heng; Shih, Ming-Hsiang |
| 國立高雄第一科技大學 |
2007.05 |
Performance study of a bridge involving sliding decks and pounded abutment during a violent earthquake
|
Wang, Ching-Jong; Shih, Ming-Hsiang |
| 國立高雄大學 |
2007-09 |
Misorientation behavior of an aluminum bicrystal with 15.7o symmetric tilt boundary using simple shear
|
Kuo, Jui-Chao; Chen, Delphic; 童士恒; Shih, Ming-Hsiang |
| 國立成功大學 |
2007-09 |
Misorientation behavior of an aluminum bicrystal with 15.7 degrees symmetric tilt boundary using simple shear
|
Kuo, Jui-Chao; Chen, Delphic; Tung, Shih-Heng; Shih, Ming-Hsiang |
| 國立成功大學 |
2007-04-25 |
Characterization of misorientation gradient of an aluminum bicrystal in simple shear
|
Chen, Delphic; Kuo, Jui-Chao; Tung, Shih-Heng; Shih, Ming-Hsiang |
| 國立高雄大學 |
2007-04 |
Characterization of Misorientation Gradient of an Aluminum Bicrystal in Simple Shear
|
Chen, Delphic; Kuo, Jui-Chao; 童士恒; Shih, Ming-Hsiang |
| 國立勤益科技大學 |
2007 |
Finite Element Modeling for the Analysis of Cracked Cylindrical Pipes
|
Sung, Wen-Pei; Go, Cheer-Germ; Shih, Ming-Hsiang |
| 國立高雄大學 |
2006-09 |
Calibration of the image distortion induced error of plane strain field measured using digital image correlation technique
|
童士恒; Kuo, Jui-Chao; Shih, Ming-Hsiang |
| 國立高雄大學 |
2006-09 |
Application of Digital Image Correlation Method for Crack Observation
|
Shih, Ming-Hsiang; 童士恒; Kuo, Jui-Chao; Sung, Wen-Pei |
| 國立勤益科技大學 |
2006 |
The Critical Loading for Lateral Buckling of Continuous Welded Rail
|
Sung, Wen-Pei ; Shih, Ming-Hsiang ; Lin, Cheng-I ; Go, Cheer-Germ |
| 國立高雄大學 |
2005-12 |
Strain Distribution Analysis Using Digital-Image-Correlation Techniques
|
童士恒; Kuo, Jui-Chao; Shih, Ming-Hsiang |
| 淡江大學 |
2005-11 |
Design guidelines for tuned liquid column damper for structures responding to wind
|
吳重成; Wu, Jong-cheng; Shih, Ming-hsiang; Lin, Yuh-yi; Shen, Ying-chang |
| 國立高雄大學 |
2005-08 |
The Isolation Efficiency of the Dual-Trench System in a Three Dimensional Wave Propagation Problem
|
童士恒; Yu, Chau-Cho; Lee, Wen-Hae; Shih, Ming-Hsiang |
| 國立勤益科技大學 |
2005 |
Analysis Modeling for Buckling Load of Plate with Vibration Test
|
Sung, Wen-Pei ; Lin, Cheng-I ; Shih, Ming-Hsiang ; Go, Cheer-Germ |
| 國立勤益科技大學 |
2005 |
A Model for Hysteresis Behavior of Rhombic Low Yielding Added Damping and Stiffness
|
Shih, Ming-hsiang ; Sung, Wen-pei |
| 國立勤益科技大學 |
2005 |
Reliable Evaluation Method of Quality Control for Compressive Strength of Concrete
|
Chen, Kuen-suan ; Sung, Wen-pei ; Shih, Ming-hsiang |
| 國立勤益科技大學 |
2004 |
The Investigation of Newly Developed Added Damping and Stiffness Device with Low Yield Strength Steel
|
Shih, Ming-Hsiang ; Sung, Wen-Pei ; Go, Cheer-Germ |
| 國立勤益科技大學 |
2004 |
Time Domain System Identification of Unknown Initial Conditions
|
Sung, Wen-Pei ; Matzen, Vernon C. ; Shih, Ming-Hsiang |
| 國立勤益科技大學 |
1999-11 |
系統識別之使用起始條件為主動變數
|
宋文沛;施明祥; Sung, Wen-Pei;Shih, Ming-Hsiang |
