| 國立臺灣科技大學 |
2019 |
Ball burnishing of Mg alloy using a newly developed burnishing tool with on-machine force control
|
Cao, Cao C.;Zhu, J.;Tanaka, Tanaka T.;Shiou, F.-J.;Sawada, Sawada S.;Yoshioka, H. |
| 國立臺灣科技大學 |
2019 |
Ultra precision surface finishing processes
|
Shiou, F.-J.;Tsegaw, A.A. |
| 國立臺灣科技大學 |
2018 |
Enhancement and stabilization of plasma using collinear long-short double-pulse laser-induced breakdown spectroscopy
|
Cui M.; Deguchi Y.; Wang Z.; Fujita Y.; Liu R.; Shiou F.-J.; Zhao S. |
| 國立臺灣科技大學 |
2018 |
Object recognition based on foreground detection using X-ray imaging
|
Lin C.-C.; Shiou F.-J. |
| 國立臺灣科技大學 |
2017 |
Emission Characteristics of Laser-Induced Plasma Using Collinear Long and Short Dual-Pulse Laser-Induced Breakdown Spectroscopy (LIBS)
|
Wang, Z.;Deguchi, Y.;Liu, R.;Ikutomo, A.;Zhang, Zhang Z.;Chong, D.;Yan, J.;Liu, J.;Shiou, F.-J. |
| 國立臺灣科技大學 |
2017 |
Fine Surface Finish of a Hardened Stainless Steel Using a New Burnishing Tool
|
Shiou, F.-J.;Huang, S.-J.;Shih, A.J.;Zhu, J.;Yoshino, M. |
| 國立臺灣科技大學 |
2017 |
Process parameters optimization of magnesium alloy quasi-vacuum casting using X-ray image defect inspection
|
Huang, S.-J.;Lin, C.-C.;Shiou, F.-J.;Huang, J.-Y. |
| 國立臺灣科技大學 |
2016 |
Development of an innovative small ball-burnishing tool embedded with a load cell
|
Shiou, F.-J;Banh, Q.-N. |
| 國立臺灣科技大學 |
2016 |
Determination of Optimal Small Ball-Burnishing Parameters for Both Surface Roughness and Superficial Hardness Improvement of STAVAX
|
Banh, Q.-N;Shiou, F.-J. |
| 國立臺灣科技大學 |
2015 |
Mathematical Determination of a Flute, Construction of a CAD Model, and Determination of the Optimal Geometric Features of a Microdrill
|
Bogale, T.M.;Shiou, F.-J.;Tang, G.-R. |
| 國立臺灣科技大學 |
2015 |
Parameters optimization on surface roughness improvement of Zerodur optical glass using an innovative rotary abrasive fluid multi-jet polishing process
|
Shiou, F.-J.;Asmare, A. |
| 國立臺灣科技大學 |
2015 |
Ultra-precision polishing of N-Bk7 using an innovative self-propelled abrasive fluid multi-jet polishing tool
|
Tsegaw, A.A.;Shiou, F.-J.;Lin, S.-P. |
| 國立臺灣科技大學 |
2015 |
Development of a small rotary multi-jet abrasive fluid jet polishing tool
|
Tsegaw, A.A.;Shiou, F.-J. |
| 國立臺灣科技大學 |
2015 |
CAD modeling and optimization of the optimal geometric features of a microdrill
|
Bogale, T.M.;Shiou, F.-J.;Tang, G.-R. |
| 國立臺灣科技大學 |
2015 |
Grey relational analysis based taguchi method for optimization design of the drilling parameters in PCB drilling process
|
Bogale, T.M.;Shiou, F.-J.;Tang, G.-R. |
| 南亞技術學院 |
2014-03 |
Structural Properties of Ga-Doped ZnO Films Grown on Polymer Substrates
|
Wang, S.S.; Yang, C.B.; Shiou, F.J.; Hsu, C.Y. |
| 國立臺灣科技大學 |
2014 |
A vision-aided automation system for destructive web thickness measurement of microdrills
|
Chang, W.-T.;Chuang, S.-F.;Tsai, Y.-S.;Tang, G.-R.;Shiou, F.-J. |
| 國立臺灣科技大學 |
2014 |
Photocatalytic performance of TiO2 thin films deposited on soda-lime glass and the effect of post-annealing on their properties
|
Wang, S.S.;Shiou, F.J.;Chiou, K.L.;Tsao, C.C.;Hsu, C.Y. |
| 國立臺灣科技大學 |
2014 |
Optimization of the surface roughness and superficial hardness improvement using the hybrid grey-based taguchi method for the small ball-burnishing process of STAVAX
|
Banh, Q.-N.;Shiou, F.-J. |
| 國立臺灣科技大學 |
2013 |
Measuring position and orientation of sheet metal parts by a 5-beam laser probe
|
Lee, R.-T.;Shiou, F.-J. |
| 國立臺灣科技大學 |
2013 |
An optical-based method and system for the web thickness measurement of microdrills considering runout compensation
|
Chang, W.-T.;Lu, S.-Y.;Chuang, S.-F.;Shiou, F.-J.;Tang, G.-R. |
| 國立臺灣科技大學 |
2013 |
Development of a new meso-scale machine tool for fabricating micro V-grooves
|
Shiou, F.-J.;Fan, K.-C.;Pan, K.-M. |
| 國立臺灣科技大學 |
2013 |
An evaluation of the deposition parameters for indium sulfide (In 2S3) thin films using the grey-based Taguchi method
|
Wang, S.S.;Shiou, F.J.;Tsao, C.C.;Huang, S.W.;Hsu, C.Y. |
| 國立臺灣科技大學 |
2013 |
Surface finish of bulk metallic glass using sequential abrasive jet polishing and annealing processes
|
Shiou, F.-J.;Loc, P.H.;Dang, N.H. |
| 國立臺灣科技大學 |
2013 |
Automated optical inspection for the runout tolerance of circular saw blades
|
Chang, W.-T.;Su, C.-H.;Guo, D.-X.;Tang, G.-R.;Shiou, F.-J. |
| 國立臺灣科技大學 |
2013 |
Investigation of optimal air-driving fluid jet polishing parameters for the surface finish of N-BK7 optical glass
|
Huu Loc, P.;Shiou, F.-J.;Yu, Z.-R.;Hsu, W.-Y. |
| 國立臺灣科技大學 |
2013 |
Properties of the Mo back contact for the formation of a thin-film photovoltaic absorber
|
Wang, S.S.;Hsu, C.Y.;Shiou, F.J.;Huang, P.C.;Wen, D.C. |
| 國立臺灣科技大學 |
2013 |
Preliminary development of an automated optical inspection system for quality control of circular saw inserts
|
Chang, W.-T.;Chuang, S.-F.;Li, C.-Y.;Shiou, F.-J.;Tang, G.-R. |
| 國立臺灣科技大學 |
2012 |
Parameter investigation of air-driving fluid jet polishing
|
Yu, Z.-R.;Hsu, W.-Y.;Pham, L.H.;Ho, C.-F.;Kuo, C.-H.;Shiou, F.-J. |
| 國立臺灣科技大學 |
2012 |
Development of an appearance defect inspection system for flexible printed circuit board
|
Su, C.-H.;Chuang, S.-F.;Chan, C.-K.;Tang, G.-R.;Shiou, F.-J. |
| 國立臺灣科技大學 |
2012 |
Development of a quasi hydrodynamic polishing process on a machining center
|
Shiou, F.-J.;Fu, M.-M.;Lin, S.-P. |
| 國立臺灣科技大學 |
2012 |
Development of an automatic inspection system for circular saw plate
|
Su, C.-H.;Chang, W.-T.;Chuang, S.-F.;Tang, G.-R.;Shiou, F.-J. |
| 國立臺灣科技大學 |
2012 |
Servo control design of a micro/nano positioning stage using FPGA based embedded hardware
|
Lin, C.-Y.;Li, C.-Y.;Shiou, F.-J.;Chen, C.-J. |
| 國立臺灣科技大學 |
2012 |
Development of a meso-scale machine tool and the preliminary cutting tests of oxygen-free copper using a polycrystalline diamond tool
|
Shiou, F.-J.;Fan, K.-C.;Pan, K.-M.;Ke, Z.-Y. |
| 國立臺灣科技大學 |
2012 |
Surface finish improvement of medium-sized mold steel using an innovative sphere-like polishing tool with force control
|
Wahjudi, A.;Shiou, F.-J. |
| 國立臺灣海洋大學 |
2011-06 |
An Improved Laser-Based Method and System for Measuring Web Thickness of Microdrills Considering Runout Compensation
|
Chang, Wen-Tung;Chuang, S. F.;Hong, D. Y.;Tsai, Y. S.;Tarng, Y. S.;Tang, G. R.;Shiou, F. J. |
| 國立臺灣科技大學 |
2010 |
Simulation study of sliding control for constant polishing force using an innovative sphere-like polishing tool on a machining center
|
Wahjudi A.; Shiou F.-J. |
| 國立臺灣科技大學 |
2010 |
Development of a print-through phenomenon measurement system using the fringe reflection method for the fiber reinforced plastics
|
Shiou F.-J.; Chen H.-J.; Hsu C.-H. |
| 國立臺灣科技大學 |
2010 |
Determination of the optimal ball grinding parameters for the bio-ceramics ZrO2 on a PC-based multi-axis CNC engraving machine
|
Shiou F.J.; Fang J.C. |
| 國立臺灣科技大學 |
2010 |
Development of a real-time closed-loop micro-/nano-positioning system embedded with a capacitive sensor
|
Shiou F.-J.; Chen C.-J.; Chiang C.-J.; Liou K.-J.; Liao S.-C.; Liou H.-C. |
| 國立臺灣科技大學 |
2010 |
Precision surface finish of the mold steel PDS5 using an innovative ball burnishing tool embedded with a load cell
|
Shiou F.-J.; Chuang C.-H. |
| 國立臺灣科技大學 |
2010 |
Calculation of the unit normal vector using the cross-curve moving mask method for probe radius compensation of a freeform surface measurement
|
Lee R.-T.; Shiou F.-J. |
| 國立臺灣科技大學 |
2010 |
Development of A non-contact complete 3D surface measurement system for small complex objects using A triangulation laser probe
|
Shiou F.-J.; Chen H.-H.; Tsai C.-H. |
| 國立臺灣科技大學 |
2009 |
Development of a novel scattered triangulation laser probe with six linear charge-coupled devices (CCDs)
|
Shiou F.-J.; Liu M.-X. |
| 國立臺灣科技大學 |
2009 |
Development of a closed-loop Micro-/nano-positioning stage with small tilting angles
|
Shiou F.-J.; Chang P.-H. |
| 國立臺灣科技大學 |
2008 |
Development of a 2-axis closed loop micro-/nano-positioning stage embedded with 2 fiber optical interferometer systems
|
Shiou, F.-J.;Hsu, H.-F.;Chen, C.-J.;Liou, H.-C. |
| 國立臺灣科技大學 |
2008 |
Surface finishing of hardened and tempered stainless tool steel using sequential ball grinding, ball burnishing and ball polishing processes on a machining centre
|
Shiou, F.-J.;Hsu, C.-C. |
| 國立臺灣科技大學 |
2008 |
Simultaneous flatness and surface roughness measurement of a plastic sheet using a fan-shaped laser beam scanning system
|
Shiou, F.J.;Deng, Y.W. |
| 國立臺灣科技大學 |
2008 |
Ultra-precision surface finish of the hardened stainless mold steel using vibration-assisted ball polishing process
|
Shiou, F.-J.;Ciou, H.-S. |
| 國立臺灣科技大學 |
2008 |
Ultra-precision surface finish of NAK80 mould tool steel using sequential ball burnishing and ball polishing processes
|
Shiou, F.J.;Cheng, C.H. |
