| 國立成功大學 |
2015-11 |
Actuator Design Based on Flux Path Switching for High Energy Utilization
|
Huang, Po-Wei; Tsai, Mi-Ching |
| 國立成功大學 |
2015-11 |
y 3-D Printing-Based Design of Axial Flux Magnetic Gear for High Torque Density
|
Tsai, Mi-Ching; Ku, Li-Hsing |
| 國立成功大學 |
2015-11 |
Impact of Electrical Steel Punching Process on the Performance of Switched Reluctance Motors
|
Chiang, Chao-Chien; Hsieh, Min-Fu; Li, Yu-Hsien; Tsai, Mi-Ching |
| 國立成功大學 |
2015-11 |
Improved Accuracy for Performance Evaluation of Synchronous Reluctance Motor
|
Lin, I-Hsien; Hsieh, Min-Fu; Kuo, Hsiu-Fu; Tsai, Mi-Ching |
| 國立成功大學 |
2014-11 |
Characteristics Measurement of Electric Motors by Contactless Eddy-Current Magnetic Coupler
|
Tsai, Mi-Ching; Chiou, Kwei-Yuan; Wang, Sheng-He; Lin, Ching-Kuo |
| 國立成功大學 |
2014-11 |
Effects of Annealing on Magnetic Properties of Electrical Steel and Performances of SRM After Punching
|
Chiang, Chao-Chien; Knight, Andrew M.; Hsieh, Min-Fu; Tsai, Mu-Gong; Liu, Bernard Haochih; Chen, In-Gann; Gaing, Zwe-Lee; Tsai, Mi-Ching |
| 國立成功大學 |
2014-04 |
Novel Stator Design of Double Salient Permanent Magnet Motor
|
Tai, Wei-Hsiu; Tsai, Mi-Ching; Gaing, Zwe-Lee; Huang, Po-Wei; Hsu, Yu-Sheng |
| 國立成功大學 |
2014-01 |
Rigorous Design and Optimization of Brushless PM Motor Using Response Surface Methodology with Quantum-Behaved PSO Operator
|
Gaing, Zwe-Lee; Lin, Cin-Hsien; Tsai, Ming-Hsiao; Hsieh, Min-Fu; Tsai, Mi-Ching |
| 國立成功大學 |
2014 |
Design of Star-Shaped Flextensional Stator for Ultrasonic Motor
|
Chang, Lien-Kai; Tsai, Mi-Ching |
| 國立成功大學 |
2013-12 |
Force sensorless control of power-assisted wheelchair based on motion coordinate transformation
|
Tsai, Mi-Ching; Hsueh, Po-Wen |
| 國立成功大學 |
2013-11 |
Reactive torque monitoring and cycling speed control of a belt-driven cycle ergometer
|
Hsueh, Po-Wen; Tsai, Mi-Ching |
| 國立成功大學 |
2013-09 |
Implementation of repetitive controller for rejection of position-based periodic disturbances
|
Yao, Wu-Sung; Tsai, Mi-Ching; Yamamoto, Yutaka |
| 國立成功大學 |
2013-06 |
Implementation and Analysis of Noncontact Acoustic Tweezers Using Quasi-Standing Waves
|
Wang, Sheng-He; Tsai, Mi-Ching |
| 國立成功大學 |
2013-05 |
Investigation of V-Shaped Line Start Permanent Magnet Motors Based on Reactance Effect
|
Huang, Po-Wei; Tsai, Mi-Ching |
| 國立成功大學 |
2012-11-20 |
Magnetic coupling assembly with an actively air gap adjustable mechanism
|
Tsai, Mi-Ching;Chuang, Hung-Shiang;Wang, Sheng-He;Ko, Po-Jen;Chiou, Kwei-Yuan |
| 國立成功大學 |
2012-11 |
Design of a Magnet-Switching Actuator With High Efficiency and Auto-Locking Function
|
Huang, Po-Wei; Tsai, Mi-Ching |
| 國立成功大學 |
2012-11 |
Static force measurement for automation assembly systems
|
Lin, Chung-Hsien; Tsai, Mi-Ching; Hsiao, Shih-Wei |
| 國立成功大學 |
2012-08 |
Detection of Magnetic Object Movements by Flux Density Tracking Control
|
Yao, Wu-Sung; Tsai, Mi-Ching; Lai, Jian-Zhi; Yang, Fu-Yun |
| 國立成功大學 |
2011-12 |
Development of a Variable-Inertia Device With a Magnetic Planetary Gearbox
|
Tsai, Mi-Ching; Huang, Cheng-Chi |
| 國立成功大學 |
2011-10 |
Development of a Novel Transverse Flux Wheel Motor
|
Hsu, Yu-Sheng; Tsai, Mi-Ching |
| 國立成功大學 |
2011-10 |
Subassembly Magnetization Strategies for a Transverse Flux Motor Equipped With NdFeB Magnet
|
Hsu, Yu-Sheng; Tsai, Mi-Ching; Hsieh, Min-Fu |
| 國立成功大學 |
2011-07 |
Dynamic modeling of thickness-mode piezoelectric transducer using the block diagram approach
|
Wang, Sheng-He; Tsai, Mi-Ching |
| 國立成功大學 |
2011-04 |
Design of a Novel Piezoelectric Vibrator Driven by Asymmetrical Electric Fields for Linear Ultrasonic Motors
|
Hsiao, Shih-Wei; Tsai, Mi-Ching |
| 國立成功大學 |
2009-10 |
Axial-Flux Permanent Magnet Brushless Motor for Slim Vortex Pumps
|
Yan, Guo-Jhih; Hsu, Liang-Yi; Wang, Jing-Hui; Tsai, Mi-Ching; Wu, Xin-Yi |
| 國立成功大學 |
2009-08 |
Actuator fault and abnormal operation diagnoses for auto-balancing two-wheeled cart control
|
Tsai, Mi-Ching; Hu, Jia-Sheng; Hu, Feng-Rung |
| 國立成功大學 |
2009-07 |
Fast Analytical Determination of Aligned and Unaligned Flux Linkage in Switched Reluctance Motors Based on a Magnetic Circuit Model
|
Mao, Shang-Hsun; Dorrell, David; Tsai, Mi-Ching |
| 國立成功大學 |
2009-04-01 |
Effect of rotor eccentricity on electric parameters in a PM brushless motor with parallel winding connections
|
Chen, H. S.; Tsai, Mi-Ching |
| 國立成功大學 |
2008-10 |
A new driver based on dual-mode frequency and phase control for traveling-wave type ultrasonic motor
|
Chen, Tien-Chi; Yu, Chih-Hsien; Tsai, Mi-Ching |
| 國立成功大學 |
2008-07 |
Neuro-fuzzy speed control of traveling-wave type ultrasonic motor drive using frequency and phase modulation
|
Chen, Tien-Chi; Yu, Chih-Hsien; Chen, Chun-Jung; Tsai, Mi-Ching |
| 國立成功大學 |
2008-06 |
A novel driver with adjustable frequency and phase for traveling-wave type ultrasonic motor
|
Chen, Tien-Chi; Yu, Chih-Hsien; Tsai, Mi-Ching |
| 國立成功大學 |
2008-05 |
Dynamic visual tracking using SDG-like matching
|
Cheng, Ming-Yang; Tsai, Mi-Ching; Chen, Chun-Jen |
| 國立成功大學 |
2008-04-01 |
Design considerations of electromagnetic force in a direct drive permanent magnet brushless motor
|
Chen, H. S.; Tsai, Mi-Ching |
| 國立成功大學 |
2008-04-01 |
Novel stator design of fan motors using soft magnetic composites
|
Hsu, Yu-Sheng; Tsai, Mi-Ching; Hsieh, Min-Fu |
| 國立成功大學 |
2008-04-01 |
Development of an ultraslim permanent magnet brushless motor for microelectronic devices
|
Hsu, Liang-Yi; Huang, Chien-Chin; Yan, Guo-Jhih; Tsai, Mi-Ching |
| 國立成功大學 |
2008-04 |
A flux-density-based electromagnetic servo system for real-time magnetic servoing/tracking
|
Tsai, Mi-Ching; Yang, Chun-Hsien |
| 國立成功大學 |
2008-03 |
Development of a magnetic planetary gearbox
|
Huang, Cheng-Chi; Tsai, Mi-Ching; Dorrell, David G.; Lin, Bor-Jeng |
| 國立成功大學 |
2008-01 |
Magnetic flux density tracking control for the measurement of isomagnetic lines
|
Yang, Chun-Hsien; Tsai, Mi-Ching |
| 國立成功大學 |
2008 |
Design of robust stabilization and fault diagnosis for an auto-balancing two-wheeled cart
|
Hu, Jia-Sheng; Tsai, Mi-Ching |
| 國立成功大學 |
2007-07 |
Winding design and fabrication of a miniature axial-flux motor by micro-electroforming
|
Tsai, Mi-Ching; Hsu, Liang-Yi |
| 國立成功大學 |
2007-07 |
Implementation of power-aided control for a virtual reality exercise bike
|
Tsai, Mi-Ching; Hu, Jia-Sheng |
| 國立成功大學 |
2007-06 |
Implementation of a non-contact X-Y mover with high temperature superconductors
|
Chen, In-Gann; Wang, Chun-Chih; Hsio, Yuan-Shan; Lai, Wen-Chien; Chen, Hang-Sheng; Tsai, Mi-Ching; Tsai, Ming-Hsun; Cheng, Ming-Yang |
| 國立成功大學 |
2007-04 |
A stand-alone peristaltic micropump based on piezoelectric actuation
|
Jang, Ling-Sheng; Li, Yuan-Jie; Lin, Sung-Ju; Hsu, Yi-Chu; Yao, Wu-Sung; Tsai, Mi-Ching; Hou, Ching-Cheng |
| 國立成功大學 |
2007-01 |
Synchronisation control of parallel dual inverted pendulums driven by linear servomotors
|
Tsai, Mi-Ching; Shen, Bin-Hong |
| 國立成功大學 |
2007 |
Pilot control of an auto-balancing two-wheeled cart
|
Tsai, Mi-Ching; Hu, Jia-Sheng |
| 國立成功大學 |
2006-11 |
Feedrate control for non-uniform rational B-spline motion command generation
|
Cheng, C. W.; Tsai, Mi-Ching; Maciejowski, J. |
| 國立成功大學 |
2006-11 |
Robust dynamic stiffness design of linear servomotor drives
|
Shen, Bin-Hong; Tsai, Mi-Ching |
| 國立成功大學 |
2006-10 |
Design of a miniature axial-flux spindle motor with rhomboidal PCB winding
|
Tsai, Mi-Ching; Hsu, Liang-Yi |
| 國立成功大學 |
2006-10 |
An efficient approach for cogging torque analysis of motors with three-dimensional flux distribution
|
Hsieh, Min-Fu; Lai, Yi-Chi; Horng, Alex; Tsai, Mi-Ching |
| 國立成功大學 |
2006-06 |
Servomechanism fault detection based on load torque observer and discrete wavelet transform
|
Cheng, Chung-Wei; Tseng, Wen-Peng; Tsai, Mi-Ching |
| 國立成功大學 |
2006 |
Dynamic visual tracking based on multiple feature matching and g-h filter
|
Cheng, Ming-Yang; Tsai, Mi-Ching; Sun, Chia-Yang |
