| 國立成功大學 |
2009-10-19 |
Structural and mechanical characterizations of ductile Fe particles-reinforced Mg-based bulk metallic glass composites
|
Jang, Jason S. C.; Jian, S. R.; Li, T. H.; Huang, J. C.; Tsao, Chi-Yuan A.; Liu, C. T. |
| 國立成功大學 |
2009-08-26 |
Microstructures and mechanical behaviors of Mg58Cu31Gd11 and Mg65Cu25Gd10 amorphous alloys synthesized by injection casting and melt spinning
|
Chena, F. H.; Chang, K. F.; Tsao, Chi-Yuan A.; Guo, M. L. T.; Huang, J. C.; Jang, J. S. C. |
| 國立成功大學 |
2009-08-15 |
On thermomechanical properties of Au-Ag-Pd-Cu-Si bulk metallic glass
|
Tang, T. W.; Chang, Y. C.; Huang, J. C.; Gao, Q.; Jang, J. S. C.; Tsao, Chi-Yuan A. |
| 國立成功大學 |
2008-03-25 |
Mg-Cu-Gd layered composite plate synthesized via the spray forming process
|
Chang, K. F.; Guo, M. L. T.; Kong, R. H.; Tsao, Chi-Yuan A.; Huang, J. C.; Jang, J. S. C. |
| 國立成功大學 |
2006-08 |
Strengthening and toughness of AZ61 mg with nano SiO2 particles
|
Hung, Y. P.; Huang, Jacob Chih-Ching; Wu, K. J.; Tsao, Chi-Yuan A. |
| 國立成功大學 |
2006-08 |
Effects of partial replacement of Cu and Y by B in Mg-Cu-Y amorphous alloys
|
Cheng, Y. T.; Hung, T. H.; Huang, Jacob Chih-Ching; Jang, Jason S. C.; Tsao, Chi-Yuan A.; Lee, P. Y. |
| 國立成功大學 |
2006-08 |
Microstructural evolution in spray-formed and melt-spun Al85Nd5Ni10 bulk hybrid composites
|
Guo, M. L. Ted; Tsao, Chi-Yuan A.; Huang, J. C.; Jang, Jason S. C. |
| 國立成功大學 |
2006 |
AZ61 Mg with nano SiO2 particles prepared by spray forming plus extrusion
|
Hung, Y. P.; Wu, K. J.; Tsao, Chi-Yuan A.; Huang, Jacob Chih-Ching; Hsieh, P. L.; Jang, Jason S. C. |
| 國立成功大學 |
2006 |
Synthesis of the magnesium-based nano/amorphous-composite alloy powder by the combination method of melt-spinning and mechanical alloying
|
Chang, L. J.; Young, J. H.; Jang, Jason S. C.; Huang, Jacob Chih-Ching; Tsao, Chi-Yuan A. |
| 國立成功大學 |
2005-04-15 |
Si coarsening of spray-formed high loading hypereutectic Al-Si alloys in the semisolid state
|
Chiang, C. H.; Tsao, Chi-Yuan A. |
| 國立成功大學 |
2005 |
Spray forming of AZ91 magnesium alloys with and without Si addition
|
Chen, C. Y.; Tsao, Chi-Yuan A. |
| 國立成功大學 |
2004-10-10 |
Spray forming of silicon added AZ91 magnesium alloy and its workability
|
Chen, C. Y.; Tsao, Chi-Yuan A. |
| 國立成功大學 |
2003 |
Workability of spray-formed Al/Si-P metal matrix composites
|
Chiang, C. H.; Tsao, Chi-Yuan A. |
| 國立成功大學 |
2002-08 |
Tribological behavior of aluminum/SiC/nickel-coated graphite hybrid composites
|
Guo, Ming-Lang T.; Tsao, Chi-Yuan A. |
| 國立成功大學 |
2002-03-15 |
Microstructure and wear behavior of spray-formed and conventionally cast rolls of 18Cr-2.5Mo-Fe alloy
|
Guo, Ming-Lang T.; Chiang, C. H.; Tsao, Chi-Yuan A. |
| 國立成功大學 |
2002-02-28 |
Measurement of the reaction energy of binary components in tri-phase thin films using the hollow cathode discharge technique
|
Yang, Y. S.; Lee, Shih-Chin; Tsao, Chi-Yuan A. |
| 國立成功大學 |
2001-06-04 |
Properties of graded TiCxNy coatings deposited by a low-temperature HCD ion coating technique
|
Yang, Y. S.; Lee, Shih-Chin; Tsao, Chi-Yuan A. |
| 國立成功大學 |
2001 |
Modelling of the thermal history of a non-spherical molten metal droplet during solidification
|
Chen, Yeong-Chin; Tsao, Chi-Yuan A. |
| 國立成功大學 |
2000 |
Tribological behavior of self-lubricating aluminium/SiC/graphite hybrid composites synthesized by the semi-solid powder-densification method
|
Guo, Ming-Lang T.; Tsao, Chi-Yuan A. |
