| 國立臺灣海洋大學 |
2009 |
Millennial sea surface temperature changes over the past 40,000 years in the subtropical western Pacific
|
Chen M.-T.;Y.-P. Chang;et al. |
| 中國文化大學 |
2008-02 |
Low-humidity sensor based on a quartz-crystal microbalance coated with polypyrrole/Ag/TiO2 nanoparticles composite thin films
|
蘇平貴;Y. P. Chang |
| 國立臺灣海洋大學 |
2008 |
A marine perspective on Taiwan environmental changes since the last glacial maximum
|
Chen M.-T.;P.-S. Yu;Y.-P. Chang;L.-J. Shiao;C.-C. Chou |
| 中原大學 |
2007-11 |
結合時序特徵與類神經網路應用於旋轉機械之故障診斷 Fault Diagnosis of Rotary Machinery from Symptoms in Time Series by Using Neural Networks
|
王俊傑;沈炳臣;鐘裕亮;王俊勝;李繼泓;張永鵬;康淵 ;Wang, C. C.;Shen, P. C.;Chung, Y. L.;Wang, C. S.;Lee, C. H.;Y. P. Chang,;Kang, Y. |
| 國立臺灣海洋大學 |
2007 |
Quaternary paleoceanographic changes in seas around Taiwan
|
Chen M.-T.;Y.-P. Chang;P.-S. Yu;L.-J. Shiao;C.-C. Chou |
| 嘉南藥理大學 |
2006-08 |
Excess metabolic syndrome and hyperuricemia in Taiwanese aborigines: environmental or genetic?
|
Y.P. Chang; W.T. Yeh; Y.Y. Cheng; W.H. Pan |
| 國立東華大學 |
2006 |
248 nm photolysis of CH2Br2 by using cavity ring-down absorption spectroscopy: Br2 molecular elimination at room temperature
|
Wei, P. Y.; Y. P. Chang; W. B. Lee; Z. F. Hu; H. Y. Huang; K. C. Lin; K. T. Chen; A. H. H. Chang |
| 國立臺灣海洋大學 |
2006 |
Monsoon forcing, hydrodynamics of the Kuroshio Current, and tectonic effects on sedimentary carbon and sulfur cycling in the Okinawa Trough since 90 ka
|
S. J. Kao;A. P. Roberts;S. C. Hsu;Y. P. Chang;W. B. Lyons;M. T. Chen |
| 南台科技大學 |
2005-11 |
Alternative processing order with efficient architecture for adaptive deblocking filter in h. 264/avc
|
C. M. Chen; C. H. Chen; J. P. Zeng; Y. P. Chang; J. J. Tang |
| 國立中山大學 |
2005 |
Rheological characteristics for thin film elastohydrodynamic lubrication
|
H.M. Chu; R.T. Lee; S.Y. Hu ; Y.P. Chang |
| 中原大學 |
2004-11 |
Linear Stability Analysis of a Rough Short Journal Bearing Lubricated with Non-Newtonian Fluids
|
H.L. Chiang;J.R. Lin;C.H. Hsu;Y.P. Chang |
| 中原大學 |
2004 |
Linear Stability Analysis of a Rough Short Journal Bearing Lubricated with Non-Newtonian Fluids
|
H.L. Chiang;J.R. Lin;C.H. Hsu;Y.P. Chang |
| 國立中山大學 |
2004 |
Transition mechanism of tribo-electrification for self-mated metals in dry severe wear process
|
Y.P. Chang; Y.C. Chiou; R.T. Lee |
| 國立中山大學 |
2003 |
Tribo-electrification mechanism for self-mated metals in dry severe wear process-part1: pure hard metals
|
Y.C. Chiou ; Y.P. Chang; R.T. Lee |
| 國立中山大學 |
2003 |
Tribo-electrification mechanism for different elf-mated metals under dry reciprocating friction-part2: pure soft metals
|
Y.C. Chiou ; Y.P. Chang; R.T. Lee |
| 中原大學 |
2001 |
Integrated ''CAE'' Strategies for the Design of Machine Tool Spindle-Bearing Systems
|
Y. Kang;Y. P. Chang;J. W. Tsai;S. C. Chen;L. K. Yang |
| 中原大學 |
2000 |
A Modified Approach Based on Influence Coefficient Method for Balancing Crank-Shafts
|
Y. Kang;Y.P. Chang;M.H. Tseng;P.H. Tang;Y.F. Chang |
| 中原大學 |
2000 |
An Investigation in Stiffness Effects on Dynamics of Rotor-Bearing-Foundation Systems
|
Y. Kang;Y.P. Chang;J.W. Tasi;L.H. Mu;Y.F. Chang |
| 中原大學 |
1999 |
The Effect of Thermophoresis on Particle Deposition from a Mixed Convection Flow onto a Vertical Flat Plate
|
Y. P. Chang;R. Tsai;F. M. Sui |
| 中原大學 |
1999 |
Transient mixed convection of a second-grade fluid past a backward-facing step
|
C. H. Hsu;B. C. Chen;Y. P. Chang |
| 中原大學 |
1998 |
Combined Effects of Thermophoresis and Electrophoresis on Particle Deposition onto a Wafer
|
R. Tsai;Y. P. Chang;T. Y. Lin |
| 中原大學 |
1998 |
Simulation of Gas-Assisted Injection Mold-Cooling Process Using Line Source Model Approach for Gas Channel
|
Y. P. Chang;S. Y. Hu;S. C. Chen |
| 中原大學 |
1998 |
Strongly Non-linear Oscillations of Winding Machines, Part I: Mode-Locking Motion and Routes to Chaos
|
Y. Kang;Y. P. Chang;S. C. Jen |
| 中原大學 |
1998 |
Strongly Non-Linear Oscillations of Winding Machines, Part I: Mode-Locking Motion and Routes to Chaos
|
Y. Kang;Y. P. Chang;S. C. Jen |
| 中原大學 |
1996-10 |
Effect of Mold Heat Transfer on the Curing Reaction of Epoxy Molding Compound During Transfer Molding
|
S. Y. Hu;Y. P. Chang;W. R. Jong;S. C. Chen |
