臺北醫學大學 |
2006 |
Fabrication of A Moldable PLA/Chitosan/ACP Composite for GTR/GBR Applications
|
楊正昌; Teng NC; Yang JC; Chen CC; Laio CH; Huang CH; Lee SY |
臺北醫學大學 |
2006 |
Fabrication of a Moldable PLA/Chitosan/ACP Composite for GTR/GBR Applications.
|
李勝揚; 鄧乃嘉; Teng N-C; Yang J-C; Chen C-C; Laio C-H; Huang C-H; Lee S-Y |
國立臺灣大學 |
2009-06 |
Fabrication of a molecularly imprinted polymer sensor by self-assembling monolayer/mediator system
|
Chen, PY; Nien, PC; Wu, CT; Wu, TH; Lin, CW; Ho, KC |
臺大學術典藏 |
2018-09-10T07:29:41Z |
Fabrication of a molecularly imprinted polymer sensor by self-assembling monolayer/mediator system
|
Chen, P.-Y.;Nien, P.-C.;Wu, C.-T.;Wu, T.-H.;Lin, C.-W.;Ho, K.-C.; Chen, P.-Y.; Nien, P.-C.; Wu, C.-T.; Wu, T.-H.; Lin, C.-W.; Ho, K.-C.; CHII-WANN LIN; KUO-CHUAN HO |
中原大學 |
2001-04-17 |
Fabrication of a multi-structure ion sensitive field effect transistor with a pH sensing layer of a tin oxide thin film
|
Shen-Kan Hsiung;Jung-Chuan Chou;Wen-Yaw Chung;Tai-Ping Sun;Hung-Kwei Liao |
國立臺灣大學 |
2010 |
Fabrication of a nano/micro hybrid lens using gas-assisted hot embossing with an anodic aluminum oxide (AAO) template
|
Wu, Jing-Tang; Chang, Wei-Yi; Yang, Sen-Yeu |
國立臺灣科技大學 |
2018 |
Fabrication of a Nonplanar Microfluidics by Using Sonication-Assisted Dissolution Technique
|
Chen, P.-C.;Chou, Chou C.-C. |
國立成功大學 |
2014-11 |
Fabrication of a Novel Diplexer Using Folded Open-Loop Ring Resonators and Microstrip Lines
|
Chen, Chia-Mao; Chang, Shoou-Jinn; Yang, Cheng-Fu |
大葉大學 |
2008-01 |
Fabrication of a novel piezoelectric actuator with high load-bearing capability
|
Cheng, C. H.;Tu, S. L. |
臺大學術典藏 |
2003 |
Fabrication of a novel porous PGA-chitosan hybrid matrix for tissue engineering
|
Hsieh, Hsyue-Jen; Lin, Mei-Chiao; Wang, Da-Ming; Wang, Yu-Chi; Wang, Yu-Chi; Lin, Mei-Chiao; Wang, Da-Ming; Hsieh, Hsyue-Jen |
國立臺灣大學 |
2003 |
Fabrication of a novel porous PGA-chitosan hybrid matrix for tissue engineering
|
Wang, Yu-Chi; Lin, Mei-Chiao; Wang, Da-Ming; Hsieh, Hsyue-Jen |
南台科技大學 |
2015-07-20 |
Fabrication of a Peristaltic Micropump with UV Curable Adhesive
|
Yi-chu Hsu;Jeffrey Levin |
國立臺灣大學 |
2002 |
Fabrication of a Piezoelectric Impact Hammer and Its Application to the In-situ Nondestructive Evaluation of Concrete
|
TONG, J.-H.; WU, T.-T.; LEE, C.-K. |
國立臺灣大學 |
2002 |
Fabrication of a Piezoelectric Impact Hammer and Its Application to the In-situ Nondestructive Evaluation of Concrete
|
Tong, J.-H.; Wu, T.-T.; Lee, C.-K. |
臺大學術典藏 |
2020-04-28T07:12:33Z |
Fabrication of a piezoelectric impact hammer and its application to the in-situ nondestructive evaluation of concrete
|
Tong, J.-H.; Wu, T.-T.; Lee, C.-K.; CHIH-KUNG LEE |
國立成功大學 |
2006-06-15 |
Fabrication of a planar-form screen-printed solid electrolyte modified Ag/AgCl reference electrode for application in a potentiometric biosensor
|
Liao, Wei-Yin; Chou, Tse-Chuan |
元智大學 |
2017-05-12 |
Fabrication of a poly(3-hydroxybutyrate) based membranes by electrospinning for rotator cuff tendon tear tissue engineering
|
賴冠安; Sun Y.-M. |
國立交通大學 |
2014-12-08T15:12:34Z |
Fabrication of a polymer-based torsional vertical comb drive using a double-side partial exposure method
|
Chung, Junwei; Hsu, Wensyang |
臺大學術典藏 |
2018-09-10T08:36:44Z |
Fabrication of a polymer/mediator composite modified electrode and its application to electrochemical detection of iodate
|
Li, T.-J.; Lin, C.-Y.; Balamurugan, A.; Kung, C.-W.; Wang, J.-Y.; Hu, C.-W.; Wang, C.-C.; Chen, P.-Y.; Vittal, R.; Ho, K.-C.; KUO-CHUAN HO |
國立高雄應用科技大學 |
2012-03 |
Fabrication of a prism structure on light guide plates with UV roll-to-plate imprinting process
|
YANG, JEN-CHIH; HUANG, CHUNG-CHING |
臺大學術典藏 |
2019-11-04T06:42:23Z |
Fabrication of a PVC-based solid-state Ag/AgCl reference electrode
|
Wu, Yi Min;LIN-CHI CHEN; Wu, Yi Min; LIN-CHI CHEN; Wu, Yi Min; LIN-CHI CHEN; LIN-CHI CHEN |
國立臺灣科技大學 |
2019 |
Fabrication of a pyramidal micro-needle array structure using 3D micro-lens mask lithography
|
Lin, T.-H.;Jiang, Jiang J.-M. |
亞洲大學 |
2017-01 |
Fabrication of a reticular poly;lactide-co-glycolide cylindrical scaffold for the in vitro development of microvascular networkds
|
Wang, Yen-Ting Tun;Yen-Ting Tung;Cheng-Chung;Cheng-Chung Chang;朱志成;Jyh-Cherng Ju;Gou-Jen Wang;Gou-Jen |
中國文化大學 |
2014-03 |
Fabrication of a room-temperature H2S gas sensor based on PPy/WO3 nanocomposite films by in-situ photopolymerization
|
Su, Pi-Guey; Peng, Yu-Ting |
中國文化大學 |
2011-02-15 |
Fabrication of a room-temperature NO2 gas sensor based on WO3 films and WO3/MWCNT nanocomposite films by combining polyol process with metal organic decomposition method
|
Su, PG (Su, Pi-Guey); Pan, TT (Pan, Te-Tsun) |