| 國立交通大學 |
2020-03-02T03:23:30Z |
Failure mechanism of a mudstone slope embedded with steep anti-dip layered sandstones: case of the 2016 Yanchao catastrophic landslide in Taiwan
|
Lin, Cheng-Han; Hung, Ching; Weng, Meng-Chia; Lin, Ming-Lang; Uzuoka, Ryosuke |
| 國立成功大學 |
2004 |
Failure mechanism of amorphous and crystalline Ta-N films in the Cu/Ta-N/Ta/SiO2 structure
|
Chang, Ching-Chun; Chen, Jen-Sue; Hsu, Wu-Shiung |
| 國立交通大學 |
2017-04-21T06:48:57Z |
Failure mechanism of Cu/SnAg/Ni microbumps in three-dimensional integral circuits under electromigration
|
Lin, Wan-Hsuan; Chao, Shu-Han; Zhan, Chau-Jie; Huang, Yu-wei; Chen, Chih |
| 南台科技大學 |
2006 |
Failure Mechanism of Electromigration (EM) in Via Sidewall for Copper Dual Damascene Interconnection
|
Y. L.Hsu; Y. K. Fang; Y. T. Chiang; S.F. Chen; C. Y Lin.; T. H. Chou; S. H. Chang；陳世芳 |
| 國立成功大學 |
2006 |
Failure mechanism of electromigration in via sidewall for copper dual damascene interconnection
|
Hsu, Y. L.; Fang, Yean-Kuen; Chiang, Yen-Ting; Chen, Shih-Fang; Lin, C. Y.; Chou, T. H.; Chang, S. H. |
| 臺大學術典藏 |
2018-09-10T18:03:09Z |
Failure mechanism of hollow tree trunks due to cross-sectional flattening
|
JIA-YANG JUANG; JIA-YANG JUANG |
| 臺大學術典藏 |
2021-07-26T06:53:30Z |
Failure mechanisms at the human dentin-resin interface: A fracture mechanics approach
|
CHUN-PIN LIN; Douglas W.H. |
| 臺大學術典藏 |
2020-01-13T08:20:14Z |
Failure mechanisms in thick composites under compressive loading
|
Daniel, I.M.; Hsiao, H.-M.; Wooh, S.-C.; HAO-MING HSIAO |
| 國立臺灣科技大學 |
2012 |
Failure mechanisms in wind turbine blade surface under critical wind loads
|
Chou, J.-S.;Huang, I.-K. |
| 國立成功大學 |
2017 |
Failure mechanisms of steep-faced geosynthetic-reinforced retaining walls subjected to toe scouring
|
Huang;Ching-Chuan |
| 國立臺灣科技大學 |
2017 |
Failure mode analysis of induction motor model
|
Hsiao, C.-H.;Liu, M.-K. |
| 大葉大學 |
2008-07-20 |
Failure mode analysis of small composite wind turbine blades
|
Hroung, Wu Jia;Yan, Kam Tai;Min, Lai Feng;Chung, Tseng Yu |
| 義守大學 |
2015-10 |
Failure mode investigation of die pick process with high speed camera and numerical analysis
|
De-Shin Liu;Chieh-Jung Lu;Cho-Liang Chung |
| 國立臺灣大學 |
2000 |
Failure Modeling and Process Monitoring for Flexible Manufacturing Systems Using Colored Timed Petri Nets
|
Kuo, C.H.; Huang, H.P. |
| 臺大學術典藏 |
2020-01-13T08:18:35Z |
Failure modeling and process monitoring for flexible manufacturing systems using colored timed petri nets
|
Kuo, C.-H.; Huang, H.-P.; HAN-PANG HUANG |
| 臺大學術典藏 |
2022-05-24T06:14:27Z |
Failure modeling and process monitoring for flexible manufacturing systems using colored timed petri nets
|
Kuo C.-H.;Huang H.-P.; Kuo C.-H.; Huang H.-P.; CHUNG-HSIEN KUO |
| 國立成功大學 |
2012-05 |
Failure modes and effects analysis for high-power GaN-based light-emitting diodes package technology
|
Horng, Ray-Hua; Lin, Re-Ching; Chiang, Yi-Chen; Chuang, Bing-Han; Hu, Hung-Lieh; Hsu, Chen-Peng |
| 國立高雄大學 |
2005-12 |
Failure Modes and Effects Analysis in A Hyper-mart Store
|
Chuang, Pao-Tiao |
| 臺大學術典藏 |
2018-09-10T05:18:56Z |
Failure modes and reliability analysis of belt-type CVT systems for scooters
|
Wu, W.-F.; Liu, T.; Wu, C.-H.; TYNG LIU |
| 臺大學術典藏 |
2020-01-13T08:24:44Z |
Failure modes and reliability analysis of belt-type CVT systems for scooters
|
Wu, W.-F.; Liu, T.; Wu, C.-H.; TYNG LIU |
| 國立高雄師範大學 |
2000 |
Failure Not Due to Silver Resistance
|
林裕森; Yu-Sen Lin |
| 國立成功大學 |
2003-07-06 |
Failure of elastomeric polymers due to rate dependent bond rupture
|
Hui, Chung-Yuen; Tang, Tian; Lin, Yu-Yun; Chaudhury, Manoj. K. |
| 國立成功大學 |
2023-11 |
Failure of Elliptical Tubes with Different Long-Short Axis Ratios under Cyclic Bending in Different Directions
|
Yu;Min-Cheng;Pan;Wen-Fung |
| 國立成功大學 |
2023 |
Failure of Elliptical Tubes with Different Long–Short Axis Ratios under Cyclic Bending in Different Directions
|
Yu, M.-C.;Pan, W.-F. |
| 國立成功大學 |
2023 |
Failure of engineering structures and associated geotechnical problems during the 2022 M L 6.8 Chihshang earthquake, Taiwan
|
Ko, Y.-Y.;Tsai, C.-C.;Hwang, J.-H.;Hwang, Y.-W.;Ge, L.;Chu, M.-C. |
