| 中華大學 |
2010 |
Mechanical properties and strain-hardening behavior of Mg alloy AZ31B-H24 thin sheet
|
吳泓瑜; Wu, Horng-yu |
| 中華大學 |
2010 |
Mechanical Properties and Strain-hardening Behaviors of a few Mg-Li-Zn Alloy Thin Sheets
|
吳泓瑜; Wu, Horng-yu |
| 國立成功大學 |
2004-06-01 |
Mechanical properties and strain-rate effect of EVA/PMMA in situ polymerization blends
|
Cheng, Shih-Kai; Chen, Chuh-Yung |
| 國立臺灣科技大學 |
2018 |
Mechanical properties and thermal characteristics of poly(lactic acid) and paraffin wax blends prepared by conventional melt compounding and sub-critical gas-assisted processing (SGAP)
|
Chen, Y.-J.;Huang, A.;Ellingham, T.;Chung, Chung C.;Turng, L.-S. |
| 國立臺灣科技大學 |
2018 |
Mechanical properties and thermal characteristics of poly(lactic acid) and paraffin wax blends prepared by conventional melt compounding and sub-critical gas-assisted processing (SGAP)
|
Chen, Y.-J.;Huang, A.;Ellingham, T.;Chung, Chung C.;Turng, L.-S. |
| 義守大學 |
2011-09 |
Mechanical properties and thermal stability of a Cu-based bulk metallic glass microalloyed with silicon
|
Pei Hua Tsai;I Sui Lee;Sheng Rui Jian;Jason Shian Ching Jang |
| 美和科技大學 |
2016-01-13 |
Mechanical Properties and Thermal Stability of Ultrathin Molybdenum Disulfide Nanowires
|
Chuan Chen1;Shin-Pon Ju; Bo-Yuan Liao2 |
| 國立成功大學 |
2021-06 |
Mechanical Properties and Tribological Behavior of MoS2-Enhanced Cellulose-Based Biocomposites for Food Packaging
|
Shi;Shih-Chen;Mandal;Kumar, Pramod;Chen;Tao-Hsing |
| 國立成功大學 |
2003-12-01 |
Mechanical properties and Young's modulus of plasmasprayed hydroxyapatite coating on Ti substrate in simulated body fluid
|
Yang, Y. C.; Chang, Edward; Lee, S. Y. |
| 國立臺灣科技大學 |
2015 |
Mechanical properties enhancement of particle reinforced magnesium matrix composites used for hot extruded tubes
|
Huang, S.J.;Hwang, Y.M.;Huang, Y.S.;Huang, C.C. |
| 國立臺灣海洋大學 |
2010-04 |
Mechanical Properties Evaluation of HFCVD Diamond-Coated WC-Co Substrates with Hard Chromized Interlayers
|
Chou C. C.;Lee J. W.;Lin H. H.;Chen Y. I. |
| 國立中山大學 |
2006 |
Mechanical Properties in Notched AS-4/PEEK APC-2 Composite Laminates at Elevated Temperature
|
M.H.R. Jen; Y.C. Tseng; S.C. Chang; M. Chen |
| 國立中山大學 |
2006 |
Mechanical Properties in Notched AS-4/PEEK APC-2 Composite Laminates at Elevated Temperature
|
M.H.R. Jen;Y.C. Tseng;S.C. Chang;M. Chen |
| 國立成功大學 |
2008-06 |
Mechanical properties measurement of PECVD silicon nitride after rapid thermal annealing using nanoindentation technique
|
Yan, H. Y.; Ou, Kuang-Shun; Chen, Kuo-Shen |
| 國立成功大學 |
2005-09 |
Mechanical properties of 304L stainless steel SMAW joints under dynamic impact loading
|
Lee, Woei-Shyan; Tzeng, Fan-Tzung; Lin, Chi-Feng |
| 國立臺灣科技大學 |
1999 |
Mechanical properties of a low alloyed austempered ductile iron in the upper ausferrite region
|
D. C. Wen;T. S. Lei |
| 臺大學術典藏 |
1998 |
Mechanical properties of a low temperature cured ceramic matrix composite
|
Shin Cs; Wang, J. B.; SHIN CS; Wang, J. B. |
| 國立臺灣大學 |
1998 |
Mechanical properties of a low temperature cured ceramic matrix composite
|
Shin, C. S.; Wang, J. B. |
| 輔英科技大學 |
2016-11-25 |
Mechanical Properties of Acrylonitrile Butadiene Rubber/Butadiene Rubber Compounds
|
孫櫻芬 |
| 國立彰化師範大學 |
1993-12 |
Mechanical Properties of Ag-sheathed Bi-based Superconducting Tapes
|
Horng, Lance; Chen, K. ; Lee, W. D. ; Wei, J. C. ; Yang, T. J. |
| 國立中山大學 |
1991 |
Mechanical Properties of Al-SiC Composites Made by Resistance Sintering of Mechanically Alloyed Powders
|
S.J. Hong;P.W. Kao |
| 國立成功大學 |
2012-01 |
Mechanical properties of Al2O3-Cr2O3/Cr3C2 nanocomposite fabricated by spark plasma sintering
|
Lin, HT (Lin, Hao-Tung); Nayak, PK (Nayak, Pramoda K.); Liu, BZ (Liu, Bo-Zon); Chen, WH (Chen, Wei-Hsio); Huang, JL (Huang, Jow-Lay) |
| 臺大學術典藏 |
1999 |
Mechanical Properties of Al2O3-NiAl Composites
|
Pai, Yu-Pan; Tuan, Wei-Hsing; Tuan, Wei-Hsing; Pai, Yu-Pan |
| 國立臺灣大學 |
1999 |
Mechanical Properties of Al2O3-NiAl Composites
|
Tuan, Wei-Hsing; Pai, Yu-Pan |
| 臺大學術典藏 |
2002 |
Mechanical properties of Al2O3/ZrO2 composites
|
Tuan, W. H.; Chen, R. Z.; Wang, T. C.; Cheng, C. H.; Kuo, P. S.; Tuan, W. H.; Chen, R. Z.; Wang, T. C.; Cheng, C. H.; Kuo, P. S.; TuanWH |
| 國立臺灣大學 |
2002 |
Mechanical properties of Al2O3/ZrO2 composites
|
Tuan, W. H.; Chen, R. Z.; Wang, T. C.; Cheng, C. H.; Kuo, P. S. |
| 臺大學術典藏 |
2020-05-12T02:53:55Z |
Mechanical properties of Al2O3/ZrO2 composites
|
Tuan, W.H.; Chen, R.Z.; Wang, T.C.; Cheng, C.H.; Kuo, P.S.; WEI-HSING TUAN |
| 臺大學術典藏 |
1995 |
Mechanical Properties of Alumina–Zirconia–Silver Composites
|
Chen, Wai-Rue; Tuan, Wei-Hsing; Tuan, Wei-Hsing; Chen, Wai-Rue |
| 國立臺灣大學 |
1995 |
Mechanical Properties of Alumina–Zirconia–Silver Composites
|
Tuan, Wei-Hsing; Chen, Wai-Rue |
| 國立臺灣科技大學 |
2003 |
Mechanical Properties of Amorphous Boron Carbon Nitride Films Produced by Dual Gun Sputtering
|
S. C. Chen;S. Chattopadhyay;L. C. Chen;S. T. Lin;K. H. Chen |
| 國立臺灣大學 |
2003-01 |
Mechanical Properties of Amorphous Boron Carbon Nitride Films Produced by Dual Gun Sputtering
|
Chien, S. C.; Chattopadhyay, S.; Chen, L. C.; Lin, S. T.; Chen, K. H. |
| 臺大學術典藏 |
2020-01-06T03:11:07Z |
Mechanical properties of amorphous boron carbon nitride films produced by dual gun sputtering
|
Chien, S. C.; Chattopadhyay, S.; Chen, L. C.; Lin, S. T.; Chen, K. H.; SHIANG-TAI LIN |
| 臺大學術典藏 |
2020-01-13T08:20:31Z |
Mechanical Properties of an Fe-Based SAM2×5-630 Metallic Glass Matrix Composite with Tungsten Particle Additions
|
Cheng, I.-C.; Kelly, J.P.; Novitskaya, E.; Eliasson, V.; Hodge, A.M.; Graeve, O.A.; I-Chung Cheng |
| 淡江大學 |
2015/12/25 |
Mechanical Properties of an Intrinsically Curved Semiflexible Biopolymer in Two Dimensions
|
Lin, Fang-ting;Zhou, Zicong |
| 大葉大學 |
2010-02 |
Mechanical properties of as-cast Zr-Ti alloys.
|
HO, WEN-FU;Sung, Y.C.;Lin, H.C.;Hsu, H.C.;Wu, S.C.;Hsu, S.K. |
| 中原大學 |
2001-12 |
Mechanical Properties of Asymmetric Polysulfone Membranes Containing Surfactant as Additives
|
Hui-An Tsai;Doan-Ho Huang;Ruoh-Chyu Ruaan;Juin-Yih Lai |
| 中原大學 |
2001-01 |
Mechanical Properties of Asymmetric Polysulfone Membranes Containing Surfactants as Additives
|
Tsai, Hui-An;Huang, Doan-Ho;Ruaan, Ruoh-Chyu;Lai, Juin-Yih |
| 國立成功大學 |
2005-12 |
Mechanical properties of Au nanowires under uniaxial tension with high strain-rate by molecular dynamics
|
Chen, Dao-Long; Chen, Tei-Chen |
| 國立東華大學 |
2007-03 |
Mechanical properties of Bi-Ag Pb-free die attach solder joints
|
Song,J. M.; Wu,Zong-Mou |
| 東方設計學院 |
2006-05 |
Mechanical properties of blocked polyurethane/epoxy interpenetrating polymer networks
|
Chen, Chin-Hsung; 孫昀妘; Sun, Yun-Yun; (東方技術學院化妝品應用與管理系) |
| 中國文化大學 |
2006 |
Mechanical properties of blocked polyurethane/epoxy interpenetrating polymer networks
|
Chen CH; Sun YY |
| 臺北醫學大學 |
2004 |
Mechanical properties of bone-implant interface: An in vitro model for the comparison of stability parameters affecting various stages during Osseo integration for dental implant
|
潘力誠; Pan LC; Ying SH |
| 國立臺灣科技大學 |
2014 |
Mechanical properties of cancer cytoskeleton depend on actin filaments to microtubules content: Investigating different grades of colon cancer cell lines
|
Pachenari, M.;Seyedpour, S.M.;Janmaleki, M.;Shayan, S.B.;Taranejoo, S.;Hosseinkhani, H. |
| 國立臺灣海洋大學 |
2003-10 |
Mechanical properties of carbonated concrete
|
Jiang Jhy Chang; Weichung Yeih; Ran Huang; Jack Maochieh Chi |
| 國立成功大學 |
2001-02 |
Mechanical properties of cement foams in shear
|
Huang, Jong-Shin; Liu, Kwan-Der |
| 國立交通大學 |
2014-12-08T15:44:38Z |
Mechanical properties of clay-polyimide (BTDA-ODA) nanocomposites via ODA-modified organoclay
|
Tyan, HL; Wei, KH; Hsieh, TE |
| 國立成功大學 |
2005 |
Mechanical properties of collagen gels derived from rats of different ages
|
Wu, Ching-Chou; Chang, Hsien-Chang; Tang, Ming-Jer; Wang, Yao-Hsien; Ding, Shinn-Jyh |
| 臺大學術典藏 |
2022-03-22T08:28:22Z |
Mechanical properties of compact bone defined by the stress-strain curve measured using uniaxial tensile test: A concise review and practical guide
|
Lin C.-Y;Kang J.-H.; Lin C.-Y; Kang J.-H.; CHE-YU LIN |
| 臺大學術典藏 |
2022-03-22T08:31:23Z |
Mechanical properties of compact bone defined by the stress-strain curve measured using uniaxial tensile test: A concise review and practical guide
|
Lin C.-Y;Kang J.-H.; Lin C.-Y; Kang J.-H.; CHE-YU LIN |
| 臺大學術典藏 |
2022-03-22T08:31:25Z |
Mechanical properties of compact bone defined by the stress-strain curve measured using uniaxial tensile test: A concise review and practical guide
|
Lin C.-Y;Kang J.-H.; Lin C.-Y; Kang J.-H.; CHE-YU LIN |
