| 國立臺灣大學 |
1993 |
Mechanical Properties of Composite Resin
|
林峰輝; 蔡雅惠; 陳瑞松; 呂重明; LIN, FENG-HUEI; TSAI, YA-HUI; CHEN, RUEY-SONG; LU, CHUNG-MING |
| 臺大學術典藏 |
1988 |
Mechanical Properties of Concrete at Low Temperature
|
Chang, Kuo-Chun; Lee, G. C.; Shin, T. S.; 張國鎮; Lee, G. C.; Shin, T. S.; Chang, Kuo-Chun; Shin, T. S. |
| 國立臺灣大學 |
1988 |
Mechanical Properties of Concrete at Low Temperature
|
張國鎮; Lee, G. C.; Shin, T. S.; Chang, Kuo-Chun; Lee, G. C.; Shin, T. S. |
| 義守大學 |
2013-11 |
Mechanical Properties of Cu2O Thin Films by Nanoindentation
|
Sheng-Rui Jian;Guo-Ju Chen;Wei-Min Hsu |
| 義守大學 |
2007-08 |
Mechanical Properties of Cu6Sn5, Cu3Sn, and Ni3Sn4 Intermetallic Compounds Measured by Nanoindentation
|
Ping-Feng Yang;Yi-Shao Lai;Sheng-Rui Jian;Jiunn Chen |
| 國立臺灣大學 |
1954 |
Mechanical Properties of Domestic Silicomanganese Steel
|
鄔性芳 |
| 元智大學 |
2009-12 |
Mechanical properties of epoxy/multi-walled carbon nanotubes nanocomposite films
|
何旭川; Ting-Yu Shiu; Wei-Nan Lin |
| 南台科技大學 |
2003-08 |
Mechanical properties of ethylene-vinyl acetate/polystyrene blends studied by in situ polymerization
|
王振乾; Shih-Kai Cheng; Po-Tsun Chen; Cheng-Chien Wang; Chuh-Yung Chen |
| 國立成功大學 |
2003-04-18 |
Mechanical properties of ethylene-vinyl acetate/polystyrene blends studied by in situ polymerization
|
Cheng, Shih-Kai; Chen, Po-Tsun; Wang, Cheng-Chien; Chen, Chuh-Yung |
| 南台科技大學 |
2007-07 |
Mechanical Properties of Expanded Graphite Composites
|
吳宗霖; Tsung-Lin Wu; Hsin-Fang Lu; Wen-Shyong Kuo |
| 國立中山大學 |
1989 |
Mechanical Properties of Fe-30Mn-10Al-1C-1Si Alloy
|
R.K. You;P.W. Kao;D. Gan |
| 國立臺灣海洋大學 |
2012-04 |
Mechanical Properties of Fluorinated DLC and Si Interlayer on a Ti Biomedical Alloy
|
Chou;C. C.*;Wu;Y.-Y.;Lee;J.-W.;Huang;J.-C.;Yeh;C.-H.;; 周昭昌 |
| 國立臺灣海洋大學 |
2013-01 |
Mechanical Properties of Fluorinated DLC and Si Interlayer on a Ti Biomedical Alloy
|
Chou;C.-C.*;Wu;Y.-Y.;Lee;J.-W.;Huang;J.-C.;Yeh;C.-H.;; 周昭昌 |
| 國立臺灣海洋大學 |
2013-01 |
Mechanical Properties of Fluorinated DLC and Si Interlayer on a Ti Biomedical Alloy
|
Chau-Chang Chou;Yi-Yang Wu;Jyh-Wei Lee;Jen-Ching Huang;Chi-Hsiao Yeh |
| 國立臺灣海洋大學 |
2012 |
Mechanical Properties of Fluorinated DLC and Si Interlayer on a Ti Biomedical Alloy
|
Chau-Chang Chou;Yi-Yang Wu;Jyh-Wei Lee;Jen-Ching Huang;Chi-Hsiao Yeh |
| 國立高雄應用科技大學 |
2013 |
Mechanical properties of free-standing graphene oxide
|
Kang, Shao-Hui; Fang, Te-Hua; Hong, Zheng-Han; Chuang, Cheng-Hsin |
| 中原大學 |
1998 |
Mechanical Properties of Gas-Assisted Injection Moulded PS, PP and Nylon Parts
|
Rean Der Chien;Shia-Chung Chen;Ming Chang Jeng;Hwei-Yen Yang |
| 朝陽科技大學 |
2017-02 |
Mechanical Properties Of Glass Fiber Reinforced Polyester Composites
|
EL-Wazerya, M. S.;EL-Elamyb, M. I.;Razzaquec, S. H. Zoalfakarc Mir Toufikur Rahmand and Md. Abdur |
| 國立臺灣科技大學 |
2009 |
Mechanical properties of gradient and multilayered TiAlSiN hard coatings
|
Chang Y.-Y.; Yang S.-J.; Wu W.; Kuo Y.-C.; Lee J.-W.; Wang C.-J. |
| 臺大學術典藏 |
2018-09-10T07:47:10Z |
Mechanical properties of heel pads reconstructed with flaps
|
Wang, C.-L. and Shau, Y.-W. and Hsu, T.-C. and Chen, H.-C. and Chien, S.-H.; CHUNG-LI WANG |
| 臺大學術典藏 |
2020-04-28T07:13:17Z |
Mechanical properties of heel pads reconstructed with flaps
|
YIO-WHA SHAU;Chien, S.-H.;Chen, H.-C.;Hsu, T.-C.;Shau, Y.-W.;Wang, C.-L.; Wang, C.-L.; Shau, Y.-W.; Hsu, T.-C.; Chen, H.-C.; Chien, S.-H.; YIO-WHA SHAU |
| 朝陽科技大學 |
2022-05 |
Mechanical Properties of High-Strength Pervious Concrete with Steel Fiber or Glass Fiber
|
李明君; Lee, Ming-Gin; Wang, Wei-Chien; Wang, Yung-Chih; Hsieh, Yi-Cheng; Yung-Chih Lin |
| 國立交通大學 |
2017-04-21T06:49:18Z |
Mechanical properties of highly (111)-oriented nanotwinned Cu lines
|
Lai, Wei-Ling; Chen, Chih |
| 中國文化大學 |
2004 |
Mechanical properties of highly elastic complex yarns with spandex made by a novel rotor twister
|
Lin JH;Chang CW; Lou CW; Hsing WH |
| 南台科技大學 |
2002-07 |
Mechanical Properties of Honeycombs with Plateau Borders
|
莊承鑫; C. H. Chuang; J. S. Huang |
| 國立高雄大學 |
2010-07 |
Mechanical properties of incineration bottom ash: the influence of composite species
|
Weng, Meng-Chia; Lin, Chiou-Liang; Ho, Chun-I |
| 國立高雄大學 |
2010 |
Mechanical properties of incineration bottom ash: the influence of composite species.
|
Weng, M.C.; Lin, C.L.; Ho, C.I. |
| 國立交通大學 |
2014-12-08T15:11:21Z |
Mechanical properties of InGaN thin films deposited by metal-organic chemical vapor deposition
|
Jian, Sheng-Rui; Jang, Jason Shian-Ching; Lai, Yi-Shao; Yang, Ping-Feng; Yang, Chu-Shou; Wen, Hua-Chiang; Tsai, Chien-Huang |
| 義守大學 |
2008-06 |
Mechanical properties of InGaN thin films deposited by metal-organic chemical vapor deposition
|
Jian SR; Jang JSC; Lai YS |
| 國立臺灣大學 |
2006 |
Mechanical properties of intermetallic compounds on lead-free solder by moir? techniques
|
Tsai, Iting; Wu, Enboa; Yen, S. F.; Chuang, T. H. |
| 臺大學術典藏 |
2020-05-12T02:53:14Z |
Mechanical properties of intermetallic compounds on lead-free solder by moiré techniques
|
TUNG-HAN CHUANG; Chuang, T.H.; Yen, S.F.; Wu, E.; Tsai, I. |
| 臺大學術典藏 |
2006 |
Mechanical properties of intermetallic compounds on lead-free solder by Moire techniques
|
Tsai, Iting; Wu, Enboa; Yen, S. F.; Chuang, T. H.; TUNG-HAN CHUANG |
| 義守大學 |
2009-08 |
Mechanical properties of intermetallic phases in multi-component Al-Si alloys using nanoindentation
|
Chen CL; Richter A; Thomson RC |
| 國立臺灣科技大學 |
2014 |
Mechanical properties of jute/PLA sandwich composites with corrugated board as a core layer
|
Chen J.-C., Wu C.-M., Huang P.-Y., Cheng K.-B., Teng Y.-A. |
| 義守大學 |
2009-02 |
Mechanical Properties of Mg58Cu31Y6Nd5 BMG Composites with the Porous Mo Dispersion
|
Hsieh Pei-Ju;Su Hsiao-Chun |
| 國立臺灣科技大學 |
2017 |
Mechanical Properties of Microcellular and Nanocellular Thermoplastic Polyurethane Nanocomposite Foams Created Using Supercritical Carbon Dioxide
|
Yeh, S.-K.;Liu, Y.-C.;Chu, Chu C.-C.;Chang, K.-C.;Wang, S.-F. |
| 臺大學術典藏 |
2020-05-12T02:52:53Z |
Mechanical properties of modified 9Cr-1Mo steel welds with notches
|
Lee, W.H.; Shiue, R.K.; Chen, C.; REN-KAE SHIUE |
| 國立臺灣海洋大學 |
2007-05-15 |
Mechanical properties of Mo–Ru thin films with Ni interlayer of different thickness
|
Chi-Yun Kang;Yung-I Chen;Chih-Hsiung Lin;Jenq-Gong Duh |
| 國立高雄應用科技大學 |
2010 |
Mechanical Properties of Multilayered Films Using Different Nanoindenters
|
Fang, Te-Hua; Wang, Tong Hong; Wu, Jia-Hung |
| 元智大學 |
2005-12 |
Mechanical Properties of MWCNT-Reinforced Polymeric Composites
|
余念一; Yi-Wei Chang |
| 元智大學 |
2006-08 |
Mechanical properties of MWCNT-reinforced polymeric composites
|
Chang, Y. W. (張益瑋); 余念一 |
| 元智大學 |
Aug-14 |
Mechanical Properties of MWCNT/Epoxy Nanocomposite Films
|
Shiuh-Chuan Her; Ting-Yu Shiu |
| 國立交通大學 |
2017-04-21T06:56:48Z |
Mechanical properties of nanocomposites with functionalized graphene
|
Lee, Ming-Wei; Wang, Tai-Yuan; Tsai, Jia-Lin |
| 國立臺灣科技大學 |
2006 |
Mechanical properties of nanocrystalline diamond films
|
Shen, Z.H.;Hess, P.;Huang, J.P.;Lin, Y.C.;Chen, K.H.;Chen, L.C.;Lin, S.T. |
| 國立臺灣大學 |
2006-06 |
Mechanical Properties of Nanocrystalline Diamond Films
|
Shen, ZH; Hess, P; Huang, JP; Lin, YC; Chen, KH; Chen, LC; Lin, ST |
| 臺大學術典藏 |
2020-01-06T03:11:04Z |
Mechanical properties of nanocrystalline diamond films
|
Shen, Z. H.; Hess, P.; Huang, J. P.; Lin, Y. C.; Chen, K. H.; Chen, L. C.; Lin, S. T.; SHIANG-TAI LIN |
| 中國文化大學 |
2020-04 |
Mechanical properties of needle-punched/thermally treated non-woven fabrics produced from recycled materials
|
Li, JH (Li, Jia-Hsun); Shiu, BC (Shiu, Bing-Chivan); Lou, CW (Lou, Ching-Wen); Hsieh, JC (Hsieh, Jing-Chzi); Hsing, WH (Hsing, Wen-Hao); Lin, JH (Lin, Jia-Horng) |
| 中國醫藥大學 |
2002-11-22 |
Mechanical Properties of Non-dispersive Calcium Phosphate Cement
|
陳文正(Wen- Cheng Chen); 林冠良(Kung-Lang Lin); 王益昌(I-Chang Wang); 何文福(Wen-Fu Ho); 林殿傑(Dan-Jae, Lin); 朱建平(Chien-Ping, Ju); 陳瑾惠(Jiin-Huey, Chern Lin) |
| 中國文化大學 |
2006 |
Mechanical properties of nylon 6,6/polyvinyl butyral blends
|
Lai SM; Lin YC |
| 南台科技大學 |
2021-09 |
Mechanical Properties of Pack Carburized SCM 420 Steel Processed Using Natural Shell Powders and Extended Carburization Time
|
Ramli;Chung-Chun Wu;Adel Shaaban |
