臺大學術典藏 |
2006-05 |
Analysis and VLSI architecture of update step in motion-compensated temporal filtering
|
Cheng, Chih-Chi; Chen, Ching-Yeh; Chen, Yi-Hau; Chen, Liang-Gee; Cheng, Chih-Chi; Chen, Ching-Yeh; Chen, Yi-Hau; Chen, Liang-Gee |
國立臺灣大學 |
2006-05 |
Analysis and VLSI architecture of update step in motion-compensated temporal filtering
|
Cheng, Chih-Chi; Chen, Ching-Yeh; Chen, Yi-Hau; Chen, Liang-Gee |
國立成功大學 |
2009-01-05 |
Analysis based on microcontact mechanism for the roughness dependent stick-slip motion
|
Wei, Pal Jen; Tsai, Pal Wei; Lin, Jen-Fin |
國立勤益科技大學 |
2011-09 |
Analysis by data mining in the emergency medicine triage database at a Taiwanese regional hospital
|
林文燦 |
臺北醫學大學 |
2005 |
Analysis by Health Belief Model On Stress Incontinence Preventive Behavior of Pelvic Floor Exercises among Elderly Women in Taipei.
|
蕭?伶; Hsiao YL; Miao NF |
臺北醫學大學 |
2005 |
Analysis by health belief model on stress incontinence preventive behavior of pelvic floor exercises elderly women in Taipei.
|
苗迺芳; Hsiao YL; Miao NF |
亞洲大學 |
2010 |
Analysis Comparison of Financial Performance By Using Various Financial Ratios Among Commercial Banks in Indonesia Malaysia and Singapore
|
Aini Farmania |
國立臺灣大學 |
2000 |
Analysis design and testing of a prototype jet-refrigeration air conditioning system
|
Chen, S.L.; Yen, J.Y.; Huang, M.C. |
臺大學術典藏 |
2021-07-28T03:10:01Z |
Analysis diffusion and glycation rate of artery in high concentration sugar condition via autofluorescence of advanced glycation end productions
|
Lin C.-J;Kang J.W;So P.T.C;Dong C.-Y.; Lin C.-J., Kang J.W., So P.T.C., Dong C.-Y.; CHEN-YUAN DONG |
中國醫藥大學 |
2006-12-23 |
Analysis dispensing errors in OPD
|
鄞玉娟; 蔡綵景; 賴振榕(Lai Zhen Rong); 謝惠芳; 郭啟文(CHI-WEN KUO)*; 侯曼貞(Hour Mann-Jen) |
中國醫藥大學 |
2006-12-23 |
Analysis dispensing errors in OPD
|
侯曼貞 |
中國醫藥大學 |
2007-09-27 |
Analysis factors effect long stay in hospice in Taiwan
|
吳偉涵(Wei-Han Wu); 林文元(Wen-Yuan lin); 李佳霙(Chia-Ing Li); 邱怡玟; 賴明美(Ming-May Lai); 劉秋松(Chiu-Shong Liu); 林正介(Cheng-Chieh Lin) |
臺北醫學大學 |
2008 |
Analysis for biodegradable polymeric scaffold of tissue engineering on precision injection molding
|
歐耿良; 鄭信忠; 沈永康; Wu,Tsung-Lung; Ou,Keng-Liang; Cheng,Hsin-Chung; Huang,Chiung-Fang; Shen,Yung-Kang; Chian,Yuh-Chyun; Lin,Yi; Chan,Yu-Hao; Li,Chien-Pang |
淡江大學 |
2021-10-27 |
Analysis for constant-stress model on multicomponent system from generalized inverted exponential distribution with stress dependent parameters
|
Wang, L.;Wu, S.-J.;Zhang, C.;Dey, S.;Tripathi, Y. M |
國立交通大學 |
2014-12-08T15:37:29Z |
Analysis for diving regulator applying local heating mechanism of vapor chamber in insert molding process
|
Wang, Jung-Chang; Li, Ai-Tsung; Tsai, Yu-Pin; Hsu, Ray-Quen |
國立臺灣海洋大學 |
2011-02 |
Analysis for Diving Regulator Applying Local Heating Mechanism of Vapor Chamber in Insert Molding Process
|
Jung-Chang Wang;Ai-Tsung Li;Yu-Pin Tsai;Ray-Quen Hsu |
國立臺灣海洋大學 |
2011-02 |
Analysis for Diving Regulator of Manufacturing Process
|
Jung Chang Wang;Yu Pin Tsai |
臺北醫學大學 |
2006 |
Analysis for Ectopic Preganacy in Assisted Reproduction at Taipei Medical University Hospital~8 years experience.
|
曾啟瑞; Chen CS; Tang WL; Wang IT; Chen CH; Chen PH; Tzeng CR |
國立臺灣海洋大學 |
2012 |
Analysis for Effects of Load Characteristics on Power System Voltage Stability
|
Pei-Hwa Huang; Ta-Hsiu Tseng |
國立交通大學 |
2014-12-08T15:19:02Z |
Analysis for Efficiency Improvement of CMOS Class-E Power Amplifiers with MEMS Inductors
|
Tsou, Wen-An; Chen, Che-Sheng; Wang, Chun-Kai; Chen, Kevin C. J.; Wu, Svu-Hsien; Wen, Kuei-Ann |
臺大學術典藏 |
2018-09-10T07:01:50Z |
Analysis for elastic strips under concentrated loads
|
KUANG-CHONG WU;Wu, K.-C.;Chiu, Y.-T.; Chiu, Y.-T.; Wu, K.-C.; KUANG-CHONG WU |
國立交通大學 |
2014-12-08T15:44:13Z |
Analysis for Giardia cysts and Cryptosporidium oocysts in water samples from small water systems in Taiwan
|
Hsu, BM; Huang, CP; Hsu, CLL |
國立成功大學 |
2001-01 |
Analysis for Giardia cysts and Cryptosporidium oocysts in water samples from small water systems in Taiwan
|
Hsu, Bing-Mu; Huang, Chihpin; Hsu, Chih-Li Lilian |
臺北醫學大學 |
2008 |
Analysis for microstructure of microlens arrays on micro injection molding by numerical simulation
|
沈永康; Shen YK; Huang CF; Shen YS; Hsu SC; Wu MW; |
國立高雄應用科技大學 |
2008 |
Analysis for microstructure of microlens arrays on micro-injection molding by numerical simulation
|
Shen, Yung-Kang; Chang, Chih-Yuan; Shen, Yu-Sheng; Hsu, Sung-Chih; Wu, Ming-Wei |