| 中國醫藥大學 |
2006-12-23 |
Analysis dispensing errors in OPD
|
侯曼貞 |
| 中國醫藥大學 |
2007-09-27 |
Analysis factors effect long stay in hospice in Taiwan
|
吳偉涵(Wei-Han Wu); 林文元(Wen-Yuan lin); 李佳霙(Chia-Ing Li); 邱怡玟; 賴明美(Ming-May Lai); 劉秋松(Chiu-Shong Liu); 林正介(Cheng-Chieh Lin) |
| 臺北醫學大學 |
2008 |
Analysis for biodegradable polymeric scaffold of tissue engineering on precision injection molding
|
歐耿良; 鄭信忠; 沈永康; Wu,Tsung-Lung; Ou,Keng-Liang; Cheng,Hsin-Chung; Huang,Chiung-Fang; Shen,Yung-Kang; Chian,Yuh-Chyun; Lin,Yi; Chan,Yu-Hao; Li,Chien-Pang |
| 淡江大學 |
2021-10-27 |
Analysis for constant-stress model on multicomponent system from generalized inverted exponential distribution with stress dependent parameters
|
Wang, L.;Wu, S.-J.;Zhang, C.;Dey, S.;Tripathi, Y. M |
| 國立交通大學 |
2014-12-08T15:37:29Z |
Analysis for diving regulator applying local heating mechanism of vapor chamber in insert molding process
|
Wang, Jung-Chang; Li, Ai-Tsung; Tsai, Yu-Pin; Hsu, Ray-Quen |
| 國立臺灣海洋大學 |
2011-02 |
Analysis for Diving Regulator Applying Local Heating Mechanism of Vapor Chamber in Insert Molding Process
|
Jung-Chang Wang;Ai-Tsung Li;Yu-Pin Tsai;Ray-Quen Hsu |
| 國立臺灣海洋大學 |
2011-02 |
Analysis for Diving Regulator of Manufacturing Process
|
Jung Chang Wang;Yu Pin Tsai |
| 臺北醫學大學 |
2006 |
Analysis for Ectopic Preganacy in Assisted Reproduction at Taipei Medical University Hospital~8 years experience.
|
曾啟瑞; Chen CS; Tang WL; Wang IT; Chen CH; Chen PH; Tzeng CR |
| 國立臺灣海洋大學 |
2012 |
Analysis for Effects of Load Characteristics on Power System Voltage Stability
|
Pei-Hwa Huang; Ta-Hsiu Tseng |
| 國立交通大學 |
2014-12-08T15:19:02Z |
Analysis for Efficiency Improvement of CMOS Class-E Power Amplifiers with MEMS Inductors
|
Tsou, Wen-An; Chen, Che-Sheng; Wang, Chun-Kai; Chen, Kevin C. J.; Wu, Svu-Hsien; Wen, Kuei-Ann |
| 臺大學術典藏 |
2018-09-10T07:01:50Z |
Analysis for elastic strips under concentrated loads
|
KUANG-CHONG WU;Wu, K.-C.;Chiu, Y.-T.; Chiu, Y.-T.; Wu, K.-C.; KUANG-CHONG WU |
| 國立交通大學 |
2014-12-08T15:44:13Z |
Analysis for Giardia cysts and Cryptosporidium oocysts in water samples from small water systems in Taiwan
|
Hsu, BM; Huang, CP; Hsu, CLL |
| 國立成功大學 |
2001-01 |
Analysis for Giardia cysts and Cryptosporidium oocysts in water samples from small water systems in Taiwan
|
Hsu, Bing-Mu; Huang, Chihpin; Hsu, Chih-Li Lilian |
| 臺北醫學大學 |
2008 |
Analysis for microstructure of microlens arrays on micro injection molding by numerical simulation
|
沈永康; Shen YK; Huang CF; Shen YS; Hsu SC; Wu MW; |
| 國立高雄應用科技大學 |
2008 |
Analysis for microstructure of microlens arrays on micro-injection molding by numerical simulation
|
Shen, Yung-Kang; Chang, Chih-Yuan; Shen, Yu-Sheng; Hsu, Sung-Chih; Wu, Ming-Wei |
| 臺大學術典藏 |
2018-09-10T08:19:31Z |
Analysis for MIMO BICM-ID Assuming Finite Precision of Extrinsic LLR
|
C. Y. Wang;I. W. Lai;T. D. Chiueh;G. Ascheid;H. Meyr; C. Y. Wang; I. W. Lai; T. D. Chiueh; G. Ascheid; H. Meyr; TZI-DAR CHIUEH |
| 國立成功大學 |
2020-03-12 |
Analysis for Mutual Impedance of Pistons by Neural Network and Its Extension of Derivative
|
Lee;Kun-Chou |
| 國立臺灣大學 |
2005 |
Analysis for Non-Homgeneous Clayed Slope Stability Using Variational Method and Finite Element Method
|
Wu, L. Y.; Lu, C. W.; Tsai, C. C.; Hu, C. C.; Lai, S. C |
| 臺北醫學大學 |
2008 |
Analysis for optimal gate design of thin-walled injection molding
|
沈永康; Shen YK; Wu CW; Yu YF; Chung HW |
| 國立臺灣海洋大學 |
2008-07 |
Analysis for optimal gate design of thin-walled injection molding
|
Yung-Kang Shen;Chih-Wei Wu;Ya-Feng Yu;Hung-Wei Chung |
| 國立臺灣海洋大學 |
2008-06 |
Analysis for replication and surface roughness of micro-feature of silicon mold insert by UV-LIGA method
|
Chiung Fang Huang;Jeol Long Lee;Yung Kang Shen;Chi Wei Wu;Yi Lin;Sung Chih Hsu;Ming Wei Wu;Chung Yu Kao |
| 國立臺灣大學 |
2008-11 |
Analysis for Seismic Response of Dry Storage Facility for Spent Fuel
|
Ko, Y.Y.; Hsu, S.Y.; Chen, C.H. |
| 國立成功大學 |
2009-02 |
Analysis for the dual-phase-lag bio-heat transfer during magnetic hyperthermia treatment
|
Liu, Kuo-Chi; Chen, Han-Taw |
| 臺大學術典藏 |
2020-01-13T08:17:59Z |
Analysis for the impact of an engine hood to a radiator support frame in a car body structure
|
Hung, T.-F.; Chang, C.-C.; Chen, F.-K.; FUH-KUO CHEN |
| 淡江大學 |
2013 |
Analysis for the Reality of the CPI when Ignoring Some Financial Assets - Evidence from Taiwan
|
Nieh, Chien-Chung; Wu, Tsui-Huang; Cheng, Kuang-Cheng; Hsieh, Joyce |
