淡江大學 |
2013-10 |
Design of Car Hood of Sandwich Structures for Pedestrian Safety
|
Teng, Tso-Liang; Liang, Cho-Chung; Shih, Chien-Jong; Nguyen, Manh-Trung |
國立臺灣科技大學 |
2009 |
Design of cascadable optical unit to compress light for light transmission used for indoor illumination
|
Whang, A.J.W.;Wang, C.C.;Chen, Y.Y. |
元智大學 |
2008-10 |
Design of cascade adaptive fuzzy sliding-mode control for nonlinear two-axis inverted-pendulum servomechanism
|
魏榮宗; 郭孟安; 李政道 |
國立中山大學 |
2002-01 |
Design of cascade phase keys for hierarchical security system
|
C.H. Yeh;Y.H. Chen;H.C. Chang;C.J. Kuo;H.T. Chang |
朝陽科技大學 |
2014-06 |
Design of Cascaded IMC-PID Controller with Improved Filter for Disturbance Rejection
|
Rao, P.V.Gopi Krishna;M.V.Subramanyam;K.Satyaprasad |
國立中山大學 |
2002 |
Design of cascaded phase keys for hierarchical security system
|
Chia-Hung Yeh;H.T. Chang;H.C. Chein;C.J. Kuo |
國立成功大學 |
2019 |
Design of casting systems for stainless steel exhaust manifold based on defective prediction model and experimental verification
|
Kuo, J.-K.;Huang, P.-H.;Lai, H.-Y.;Wu, Wu W.-J. |
國立交通大學 |
2014-12-08T15:43:19Z |
Design of catadioptric lens with servo optical mechanism in holographic recording system
|
Lan, Yung-Sung; Tien, Chung-Hao |
臺大學術典藏 |
2018-09-10T15:23:34Z |
Design of causal stable IIR filter banks with powers-of-two coefficients
|
Phoong, S.-M.;Lin, B.-T.;Lin, Y.-P.; Phoong, S.-M.; Lin, B.-T.; Lin, Y.-P.; SEE-MAY PHOONG |
國立政治大學 |
1994-06 |
Design of Cellular Manufacturing System with Neural Network Model Implementation
|
蘇純繒;劉文卿;陳奕光 |
南台科技大學 |
2006 |
Design of ceramic chip antenna for 2.4/5GHz WLAN applications
|
Yi-Fang Lin; Chia-Ho Lin; Hua-Ming Chen;Jen-Yea Jan; Wen-Shan Chen; 林憶芳;林志鴻;陳文山 |
臺大學術典藏 |
2018-09-10T05:24:03Z |
Design of channel-resilient DFT bank transceivers
|
Luo, T.-H.; Liu, C.-H.; Phoong, S.-M.; Lin, Y.-P.; SEE-MAY PHOONG |
國立交通大學 |
2014-12-08T15:16:40Z |
Design of charge pump circuit with consideration of gate-oxide reliability in low-voltage CMOS processes
|
Ker, MD; Chen, SL; Tsai, CS |
南台科技大學 |
2023-04 |
Design of Chatbot Applied to Calculus
|
Shing-Lin Chang |
東海大學 |
1962-07-00 |
Design of Chemical Process and Equipment. I. (Corn Produts Refining Process)
|
李漢英; Lee, Han-ying |
國立臺灣科技大學 |
2009-10 |
Design of chirp excitation waveform for dual-frequency harmonic contrast detection
|
Che-Chou Shen;Yi-Yuan Chiu |
義守大學 |
2012-07 |
Design of Circuit Emulation over Ethernet
|
Tain-Lieng Kao;Kou-Tan Wu |
國立成功大學 |
2012 |
Design of Circular Polarization Antenna With Harmonic Suppression for Rectenna Application
|
Huang, Fu-Jhuan; Yo, Tzong-Chee; Lee, Chien-Ming; Luo, Ching-Hsing |
臺大學術典藏 |
2018-09-10T07:42:52Z |
Design of circular polarization filter using thin-film helicoidal bianisotropic medium
|
Y.-F. Yeh;J.-F. Kiang; Y.-F. Yeh; J.-F. Kiang; JEAN-FU KIANG |
國立交通大學 |
2014-12-08T15:48:43Z |
Design of Circular-shape No-loss Bent Lightpipe with a Novel Transform of Elliptical Form
|
Peng, Yi-Wen; Chern, Jyh-Long |
大葉大學 |
2007-11 |
Design of circularly polarized annular-ring slot antennas fed by a double-bent microstripline
|
Sze, Jia-Yi;Hsu, Chung-I G.;Ho, Min-Hua;Ou, Yu-He;Wu, Ming-Ting |
國立彰化師範大學 |
2007-11 |
Design of Circularly Polarized Annular-Ring Slot Antennas Fed by a Double-Bent Microstripline
|
Sze, Jia-Yi; Hsu, Chung-I G. ; Ho, Min-Hua; Ou, Yu-He; Wu, Ming-Ting |
國立中山大學 |
2000-08 |
Design of circularly polarized microstrip antenna with improved CP quality
|
J.S. Kuo;J.Y. Sze;K.L. Wong |
大葉大學 |
2011-07 |
Design of Clamping Apparatuses and Fatigue Testing Procedures of A Vertical-Axis Composite Wind Power System
|
Min, Lai Feng;Yang, Chao-Chieh;Yang, Chen-Mao;Lan, Chun-Hsiang;Liou, Jing-Wun |
大葉大學 |
2011-09-01 |
Design of clamping apparatuses and fatigue testing procedures of a vertical-axis composite wind power system
|
Min, Lai Feng;Yang, Chao-Chieh;Liou, Jing-Wun;Yang, Chen-Mao;Lan, Chun-Hsiang |
大葉大學 |
2011-09-1 |
Design of clamping apparatuses and fatigue testing procedures of a vertical-axis composite wind power system
|
Min, Lai Feng;Yang, Chao-Chieh;Liou, Jing-Wun;Yang, Chen-Mao;Lan, Chun-Hsiang |
大葉大學 |
2011-07-24 |
Design of clamping apparatuses and testing procedures of a vertical-axis composite wind power system
|
Min, Lai Feng;Yang, Chao-Chieh;Yang, Chen-Mao;Lan, Chun-Hsiang |
大葉大學 |
2011-09-01 |
Design of clamping apparatuses and testing procedures of a vertical-axis composite wind power system
|
Min, Lai Feng;Yang, Chao-Chieh;Yang, Chen-Mao;Lan, Chun-Hsiang |
大葉大學 |
2011-09-1 |
Design of clamping apparatuses and testing procedures of a vertical-axis composite wind power system
|
Min, Lai Feng;Yang, Chao-Chieh;Yang, Chen-Mao;Lan, Chun-Hsiang |
大葉大學 |
2008-07-20 |
Design of clamping apparatuses for testing composition of composite wind turbine blades
|
Min, Lai Feng;Hroung, Wu Jia;Chung, Tseng Yu;Shyan, Wang Jean |
國立中山大學 |
2007-10 |
Design of Class-E power amplifier for hybrid quadrature polar modulation transmitter
|
J.K. Jau;J.Y. Li;C.J. Li;T.S. Horng;J. Deng;C.T. Chen |
國立臺灣師範大學 |
2014-10-30T09:27:49Z |
Design of Classroom Activities for On-line Synchronized Instruction of Cross-cultured Communication.
|
Chu, W. H. |
國立臺灣科技大學 |
2014 |
Design of client device identification by clock skew in clouds
|
Huang, D.-J.;Yang, K.-T.;Teng, W.-C.;Chiu, G.-M. |
元智大學 |
2013-01 |
Design of clock and ramp generator circuit framework with 0.9V low operational voltage
|
廖俊傑; Rong-Jong W. |
中國文化大學 |
1995-07 |
Design of Clustering Analysis Using Systolic Arrays
|
賴茂富 |
國立臺灣大學 |
1994-12 |
Design of clustering analyzer based on systolic array architecture
|
Lai, Mao-Fu; Wu, Yan-Pei; Hsieh, Chaur-Heh |
中華大學 |
2011 |
Design of CMOS Current-Controlled-Gamma Corrector
|
林國珍; Lin, Kuo-Jen |
東海大學 |
2009 |
Design of CMOS T/R switch using high-substrate isolation and RF floated body for 1.9-GHz applications
|
Lin, Y.-H., Chu, C.-H., Chang, D.-C., Gong, J., Juang, Y.-Z. |
中國文化大學 |
1988-07 |
Design of Coal Liquefaction Plants in the Face of V-L-E Uncertainty
|
鍾延春; Neuman, Mark; Kunesh, John |
國立成功大學 |
2020 |
Design of coaxial magnetic gear mechanisms using taguchi method
|
Wu, Y.-C.;Tsai, M.-C.;Fajri, S.N.;Ou, F.-M. |
元智大學 |
2005-09 |
Design of Collaborative Engineering Data System (CEDS): An Application Case of Process Integration
|
范治民; Shi-Chung CHang; Henry Chang |
國立臺灣大學 |
2005-09 |
Design of Collaborative Engineering Data System (CEDS): an application case of process integration
|
Fan, Chih-Min; Chang, Shi-Chung; Chang, Henry |
臺大學術典藏 |
2018-09-10T05:23:42Z |
Design of collaborative engineering data system (CEDS): An application case of process integration
|
Fan, C.-M.; Chang, S.-C.; Chang, H.; SHI-CHUNG CHANG |
臺大學術典藏 |
2020-01-13T08:18:32Z |
Design of combined voltage reference and temperature sensor for RFID applications
|
Huang, H.-P.; Liu, C.-P.; HAN-PANG HUANG |
國立政治大學 |
1994-10 |
Design of Command and Control Systems Using Petri Nets and Object-oriented technology
|
趙玉;M. C. Zhou; D. Wang |
國立成功大學 |
2009-03 |
Design of command shapers for residual vibration suppression in Duffing nonlinear systems
|
Chen, Kuo-Shen; Yang, Tian-Shiang; Ou, Kuang-Shun; Yin, Jui-Feng |
國立勤益科技大學 |
2010-02 |
Design of Communication Interface and Control System for Intelligent Humanoid Robot
|
é»åè |
國立勤益科技大學 |
2010-02 |
Design of Communication Interface and Control System for Intelligent Humanoid Robot
|
林熊徵 |
國立勤益科技大學 |
2012-12 |
Design of Communication Interface and Control System for Intelligent Humanoid Robot
|
黃國興 |
臺大學術典藏 |
2020-05-04T08:08:39Z |
Design of communication interface and control system for intelligent humanoid robot.
|
Lin, Hsiung-Cheng; Chen, Chao-Hung; Huang, Guo-Shing; Liu, Ying-Chu; Hsu, Wei-Chung; WEI-CHUNG HSU |