| 國立交通大學 |
2015-12-02T02:59:22Z |
Fabricating 43-mu m-Thick and 12% Efficient Heterojunction Silicon Solar Cells by Using Kerfless Si(111) Substrates
|
Du, Chen-Hsun; Chen, Chien-Hsun; Wang, Teng-Yu; Hsiao, Jui-Chung; Yeh, Chun-Ming; Chen, Chun-Heng; Yeh, J. Andrew; Yu, Peichen |
| 淡江大學 |
2010-06 |
Fabricating a Heat Pipe Structure within a Radiating Plate for Electronics Fan-Less Cooling
|
Yu, Chun-sheng; Kang, Shung-wen; Chan, Hong-bin |
| 淡江大學 |
2006-06 |
Fabricating a hollow optical waveguide for optical communication applications
|
Lo, Shih-shou; Chen, Chii-chang; Hsu, Shih-chieh; Liu, Cheng-yi |
| 國立交通大學 |
2014-12-08T15:36:52Z |
Fabricating a micromould insert using a novel process
|
Chen, RH; Chang, CC; Cheng, CM |
| 國立交通大學 |
2015-12-02T02:59:30Z |
Fabricating a n(+)-Ge contact with ultralow specific contact resistivity by introducing a PtGe alloy as a contact metal
|
Hsu, C. C.; Chou, C. H.; Wang, S. Y.; Chi, W. C.; Chien, C. H.; Luo, G. L. |
| 國立交通大學 |
2016-03-28T00:04:19Z |
Fabricating a n(+)-Ge contact with ultralow specific contact resistivity by introducing a PtGe alloy as a contact metal (vol 107, 113503, 2015)
|
Hsu, C. C.; Chou, C. H.; Wang, S. Y.; Chi, W. C.; Chien, C. H.; Luo, G. L. |
| 臺大學術典藏 |
2009 |
Fabricating alignment-layer free flexible liquid crystal devices by replica molding method
|
Chao, Chih-Yu; Lin, Tzu-Chieh; Chen, Jun-Wei; Chen, Pei-Shiang; Chang, Han-Hsun; Chen, Jun-Wei; Lin, Tzu-Chieh; Chao, Chih-Yu; Chen, Pei-Shiang; Chang, Han-Hsun |
| 國立臺灣大學 |
2009 |
Fabricating alignment-layer free flexible liquid crystal devices by replica molding method
|
Chen, Pei-Shiang; Chang, Han-Hsun; Chen, Jun-Wei; Lin, Tzu-Chieh; Chao, Chih-Yu |
| 臺大學術典藏 |
2018-09-10T07:29:24Z |
Fabricating alignment-layer free flexible liquid crystal devices by the replica molding method
|
Chen, J.-W.; Lin, T.-C.; Chao, C.-Y.; CHIH-YU CHAO; Chen, P.-S.;Chang, H.-H.;Chen, J.-W.;Lin, T.-C.;Chao, C.-Y.; Chen, P.-S.; Chang, H.-H. |
| 國立臺灣大學 |
2009-03 |
Fabricating an Amperometric Cholesterol Biosensor by a Covalent Linkage between Poly(3-thiopheneacetic acid) and Cholesterol Oxidase
|
Nien, PC; Chen, PY; Ho, KC |
| 臺大學術典藏 |
2018-09-10T07:29:41Z |
Fabricating an amperometric cholesterol biosensor by a covalent linkage between Poly(3-thiopheneacetic acid) and cholesterol oxidase
|
KC"; Nien, PC; Chen, PY; Ho, KC; Nien, PC; KUO-CHUAN HO; Huang, Yi-Wen; Lin, Shih-Chang; Chen, PY; Ho, KC; Wei, Shu-Chen; Hu, Jui-Ting; Chang, Han-Yu; Huang, Shih-Hung; Chen, Ding-Shinn; Chen, Pei-Jer; Hsu, Ping-Ning; Yang, Sien-Sing; Kao, Jia-Horng陳定信; 高嘉宏; 魏淑?; 陳培哲; 許秉寧 |
| 國立交通大學 |
2014-12-08T15:16:52Z |
Fabricating and characterizing oblique polymer structures by electron beam writing on resist-coated SiO2 wafers
|
Ko, FH; Chen, JK; Chang, FC |
| 臺大學術典藏 |
2020-01-13T08:24:58Z |
Fabricating barbed microtip arrays by low-cost silicon wet etching techniques
|
YAO-JOE YANG; Hsu, L.-S.; Yang, Y.-J.; Kuo, C.-H.; Tung, S.-W. |
| 淡江大學 |
2020-07-20 |
Fabricating Behavior Sensor Computing Approach for Coexisting Design Environment. Sensors and Materials
|
Chang, Teng-Wen;Hsiao, Chi-Fu;Chen, Chun-Yen;Huang, Wei-Xin;Datta, Sambit;Mao, Wei-Lung |
| 臺大學術典藏 |
2022-01-22T00:04:35Z |
Fabricating BiOI nanostructures armed catalytic strips for selective electrochemical and SERS detection of pesticide in polluted water
|
Balaji, Ramachandran; Maheshwaran, Selvarasu; Chen, Shen Ming; Tamilalagan, Elayappan; Chandrasekar, Narendhar; Ethiraj, Selvarajan; Samuel, Melvin S. |
| 國立成功大學 |
2016-06 |
Fabricating curved super-hydrophobic surfaces greenly using recycled polypropylene
|
Lin, Yung-Tsan; Chou, Jung-Hua |
| 臺大學術典藏 |
2021-02-04T02:49:12Z |
Fabricating efficient flexible organic photovoltaics using an eco-friendly cellulose nanofibers/silver nanowires conductive substrate
|
Lin, P.-C.; Hsieh, C.-T.; Liu, X.; Chang, F.-C.; Chen, W.-C.; Yu, J.; Chueh, C.-C.; Lin, P.-C.; Hsieh, C.-T.; Liu, X.; Chang, F.-C.; Chen, W.-C.; Yu, J.; Chueh, C.-C.; CHU-CHEN CHUEH |
| 臺大學術典藏 |
2021-08-05T02:40:24Z |
Fabricating efficient flexible organic photovoltaics using an eco-friendly cellulose nanofibers/silver nanowires conductive substrate
|
Lin P.-C;Hsieh C.-T;Liu X;Chang F.-C;Chen W.-C;Yu J;Chueh C.-C.; Lin P.-C; Hsieh C.-T; Liu X; Chang F.-C; Chen W.-C; Yu J; Chueh C.-C.; WEN-CHANG CHEN |
| 臺大學術典藏 |
2022-04-25T06:12:42Z |
Fabricating efficient flexible organic photovoltaics using an eco-friendly cellulose nanofibers/silver nanowires conductive substrate
|
Lin P.-C;Hsieh C.-T;Liu X;Chang F.-C;Chen W.-C;Yu J;Chueh C.-C.; Lin P.-C; Hsieh C.-T; Liu X; Chang F.-C; Chen W.-C; Yu J; Chueh C.-C.; FENG-CHENG CHANG |
| 國立交通大學 |
2014-12-08T15:36:51Z |
Fabricating embedded SU-8 microstructures with asymmetric inside cross section by double-side multiple partial exposure method
|
Huang, Yuan-Te; Hsu, Wensyang |
| 國立交通大學 |
2019-12-13T01:09:54Z |
Fabricating GaN-based LEDs on (-201) beta-Ga2O3 substrate via non-continuous/continuous growth between low-temperature undoped-GaN and high-temperature undoped-GaN in atmospheric pressure metal-organic chemical vapor deposition
|
Lan, Yu-Pin; Chen, Yen-Chun; Yeh, Yi-Yun; Hung, Shun-Ming |
| 臺大學術典藏 |
2018-09-10T09:47:52Z |
Fabricating graphite nano-sheet powder by slow electrochemical exfoliation of large-scale graphite foil as a mode-locker for fiber lasers
|
Yang, C.-Y.;Wu, C.-L.;Lin, Y.-H.;Tsai, L.-H.;Chi, Y.-C.;Chang, J.-H.;Wu, C.-I.;Tsai, H.-K.;Tsai, D.-P.;Lin, G.-R.; Yang, C.-Y.; Wu, C.-L.; Lin, Y.-H.; Tsai, L.-H.; Chi, Y.-C.; Chang, J.-H.; Wu, C.-I.; Tsai, H.-K.; Tsai, D.-P.; Lin, G.-R.; CHIH-I WU; GONG-RU LIN |
| 臺大學術典藏 |
2020-06-11T06:37:56Z |
Fabricating graphite nano-sheet powder by slow electrochemical exfoliation of large-scale graphite foil as a mode-locker for fiber lasers
|
Yang, C.-Y.;Wu, C.-L.;Lin, Y.-H.;Tsai, L.-H.;Chi, Y.-C.;Chang, J.-H.;Wu, C.-I.;Tsai, H.-K.;Tsai, D.-P.;Lin, G.-R.; Yang, C.-Y.; Wu, C.-L.; Lin, Y.-H.; Tsai, L.-H.; Chi, Y.-C.; Chang, J.-H.; Wu, C.-I.; Tsai, H.-K.; Tsai, D.-P.; Lin, G.-R.; GONG-RU LIN |
| 國立交通大學 |
2014-12-08T15:36:51Z |
Fabricating High-Aspect Ratio Microchannels on Metallic Sheets Using Hydroforming
|
Lin, Chih-Chia; Yan, Jhen-Jie; Hung, Chinghua; Hung, Jung-Chung |
| 淡江大學 |
2005-12 |
Fabricating low-loss hollow optical waveguides via amorphous silicon bonding using dilute KOH solvent
|
Lo, Shih-shou; Chiu, Hua-kung; Chen, Chii-chang; Hsu Shih-chieh; Liu, Cheng-yi |
| 中華大學 |
2012 |
Fabricating microstructures on CVD diamond film
|
馬廣仁; Ma, Kung-Jen |
| 淡江大學 |
2012 |
Fabricating microstructures on CVD diamond film
|
Chao, Choung-Lii; Chou, Wen-Chen; Lin, Wen-Chung; Su, Wei-Jhe; Ma, Kung-Jeng |
| 臺大學術典藏 |
2020-01-13T08:23:19Z |
Fabricating nanostructures by atomic force microscopy
|
Huang, J.-C.; Weng, Y.-J.; Yang, S.-Y.; Weng, Y.-C.; Wang, J.-Y.; SEN-YEU YANG |
| 國立高雄大學 |
2011 |
Fabricating Novel Complicated Composites Using Polyetherimide-Carbon Nanotubes-(Ba0.8Sr0.2)(Ti0.9Zr0.1)O3 Ceramic Powder, revised
|
Su, Chean-Cheng; Yang, Cheng-Fu; Wu, Chia-Ching |
| 國立成功大學 |
2011-09 |
Fabricating of aspheric micro-lens array by excimer laser micromachining
|
Chiu, Chi-Cheng; Lee, Yung-Chun |
| 國立臺灣科技大學 |
2007 |
Fabricating of vertical thin film transistors component using DMD maskless pohotolithography system
|
Hsiao W.-K.; Jeng J.-Y. |
| 中原大學 |
2007-8-16 |
Fabricating PC/PAN composite membranes by vapor-induced phase separation
|
S. T. Kao;D. M. Wang;H. A. Tsai;C. Y. Hsieh;K. R. Lee;J. Y. Lai; |
| 南亞技術學院 |
2008-12-15 |
Fabricating PC/PAN composite membranes by vapor-induced phase separation
|
Kao, S. T.;Teng, M. Y.;Li, C. L.;Kuo, C. Y.;Hsieh, C. Y.;Tsai, H. A.;Wang, D. M.;Lee, K. R.;Lai, J. Y. |
| 南亞技術學院 |
2007/08/16 |
Fabricating PC/PAN composite membranes by vapor-induced phase separation
|
蔡惠安 |
| 國立臺灣大學 |
2008 |
Fabricating PC/PAN composite membranes by vapor-induced phase separation
|
Kao, S.T.; Teng, M.Y.; Li, C.L.; Kuo, C.Y.; Hsieh, C.Y.; Tsai, H.A.; Wang, D.M.; Lee, K.R.; Lai, J.Y. |
| 元智大學 |
2015-06-28 |
Fabricating perpendicular magnetic anisotropy CoPt alloy thin film by alternative sputtering method at room temperature
|
Yu-Shen Chen; Chuan-Fa Huang; An-Cheng Sun |
| 中原大學 |
2007-1-19 |
Fabricating skin-free membranes by in-situ casting two processes
|
S. T. Kao;K. R. Lee;D. M. Wang;J. Y. Lai; |
| 中原大學 |
2008-1-18 |
Fabricating skin-free membranes by wet phase inversion method
|
S. T. Kao;W. C. Chao;K. R. Lee;D. M. Wang;J. Y. Lai |
| 國立臺灣大學 |
2006-05 |
Fabricating subwavelength array structures using a near-field photolithographic method
|
Chang, W.L.; Chang, Y.J.; Wei, P.K.; Tsao, and P. -H. |
| 國立臺灣海洋大學 |
2006-03 |
Fabricating Subwavelength Array Structures Using a Near-field Photolithographic Method
|
Pei-Kuen Wei; Wei-Lun Chang; Yu-Jen Chang |
| 東海大學 |
2011-06 |
Fabricating textile-bricks: learning parametric design by simulating natural patterns.
|
邱浩修 |
| 國立交通大學 |
2014-12-08T15:37:09Z |
Fabricating thin-film transistors on plastic substrates using spin etching and device transfer
|
Wang, SC; Yeh, CF; Hsu, CT; Lou, JC |
| 國立成功大學 |
2016-06-17 |
Fabricating translucent polydimethylsiloxane (PDMS) super-hydrophobic surface greenly by facile water-dissolved fillers
|
Lin, Yung-Tsan; Chou, Jung-Hua |
| 國立臺灣科技大學 |
2010 |
Fabricating ZnO nanowires-based humidity sensor via dielectrophoresis method
|
Wang Y.; Yeow J.T.W.; Yin Y.-T.; Chen L.-Y. |
| 國立成功大學 |
2015-01-01 |
Fabrication AlGaN/GaN MIS UV Photodetector by H2O2 Oxidation
|
Liu, Han-Yin; Hsu, Wei-Chou; Chou, Bo-Yi; Wang, Yi-Hsuan |
| 淡江大學 |
2019-04-16 |
Fabrication and 3D Patterning of Bio-Composite Consisting of Carboxymethylated Cellulose Nanofibers and Cobalt Ferrite Nanoparticles
|
Pong, W.F. |
| 國立交通大學 |
2014-12-08T15:02:23Z |
Fabrication and analyses of negative-birefringent thin film compensator with characteristic matrix
|
Yoo, JC; Shieh, HPD |
| 國立交通大學 |
2019-04-02T05:58:28Z |
Fabrication and analyses of negative-birefringent thin film compensator with characteristic matrix
|
Yoo, JC; Shieh, HPD |
| 國立中山大學 |
2006 |
Fabrication and analysis of a magnetic self-power microgenerator
|
C.T. Pan; Y.M. Hwang; H.L. Hu; H.C. Liu |
| 國立成功大學 |
2008-11 |
Fabrication and analysis of a micro-machined tri-axis gyroscope
|
Tsai, Nan-Chyuan; Sue, Chung-Yang |
