| 中原大學 |
2007-8-16 |
Fabricating PC/PAN composite membranes by vapor-induced phase separation
|
S. T. Kao;D. M. Wang;H. A. Tsai;C. Y. Hsieh;K. R. Lee;J. Y. Lai; |
| 南亞技術學院 |
2008-12-15 |
Fabricating PC/PAN composite membranes by vapor-induced phase separation
|
Kao, S. T.;Teng, M. Y.;Li, C. L.;Kuo, C. Y.;Hsieh, C. Y.;Tsai, H. A.;Wang, D. M.;Lee, K. R.;Lai, J. Y. |
| 南亞技術學院 |
2007/08/16 |
Fabricating PC/PAN composite membranes by vapor-induced phase separation
|
蔡惠安 |
| 國立臺灣大學 |
2008 |
Fabricating PC/PAN composite membranes by vapor-induced phase separation
|
Kao, S.T.; Teng, M.Y.; Li, C.L.; Kuo, C.Y.; Hsieh, C.Y.; Tsai, H.A.; Wang, D.M.; Lee, K.R.; Lai, J.Y. |
| 元智大學 |
2015-06-28 |
Fabricating perpendicular magnetic anisotropy CoPt alloy thin film by alternative sputtering method at room temperature
|
Yu-Shen Chen; Chuan-Fa Huang; An-Cheng Sun |
| 中原大學 |
2007-1-19 |
Fabricating skin-free membranes by in-situ casting two processes
|
S. T. Kao;K. R. Lee;D. M. Wang;J. Y. Lai; |
| 中原大學 |
2008-1-18 |
Fabricating skin-free membranes by wet phase inversion method
|
S. T. Kao;W. C. Chao;K. R. Lee;D. M. Wang;J. Y. Lai |
| 國立臺灣大學 |
2006-05 |
Fabricating subwavelength array structures using a near-field photolithographic method
|
Chang, W.L.; Chang, Y.J.; Wei, P.K.; Tsao, and P. -H. |
| 國立臺灣海洋大學 |
2006-03 |
Fabricating Subwavelength Array Structures Using a Near-field Photolithographic Method
|
Pei-Kuen Wei; Wei-Lun Chang; Yu-Jen Chang |
| 東海大學 |
2011-06 |
Fabricating textile-bricks: learning parametric design by simulating natural patterns.
|
邱浩修 |
| 國立交通大學 |
2014-12-08T15:37:09Z |
Fabricating thin-film transistors on plastic substrates using spin etching and device transfer
|
Wang, SC; Yeh, CF; Hsu, CT; Lou, JC |
| 國立成功大學 |
2016-06-17 |
Fabricating translucent polydimethylsiloxane (PDMS) super-hydrophobic surface greenly by facile water-dissolved fillers
|
Lin, Yung-Tsan; Chou, Jung-Hua |
| 國立臺灣科技大學 |
2010 |
Fabricating ZnO nanowires-based humidity sensor via dielectrophoresis method
|
Wang Y.; Yeow J.T.W.; Yin Y.-T.; Chen L.-Y. |
| 國立成功大學 |
2015-01-01 |
Fabrication AlGaN/GaN MIS UV Photodetector by H2O2 Oxidation
|
Liu, Han-Yin; Hsu, Wei-Chou; Chou, Bo-Yi; Wang, Yi-Hsuan |
| 淡江大學 |
2019-04-16 |
Fabrication and 3D Patterning of Bio-Composite Consisting of Carboxymethylated Cellulose Nanofibers and Cobalt Ferrite Nanoparticles
|
Pong, W.F. |
| 國立交通大學 |
2014-12-08T15:02:23Z |
Fabrication and analyses of negative-birefringent thin film compensator with characteristic matrix
|
Yoo, JC; Shieh, HPD |
| 國立交通大學 |
2019-04-02T05:58:28Z |
Fabrication and analyses of negative-birefringent thin film compensator with characteristic matrix
|
Yoo, JC; Shieh, HPD |
| 國立中山大學 |
2006 |
Fabrication and analysis of a magnetic self-power microgenerator
|
C.T. Pan; Y.M. Hwang; H.L. Hu; H.C. Liu |
| 國立成功大學 |
2008-11 |
Fabrication and analysis of a micro-machined tri-axis gyroscope
|
Tsai, Nan-Chyuan; Sue, Chung-Yang |
| 淡江大學 |
2009 |
Fabrication and analysis of aluminum vapor chamber heat spreaders
|
洪裕勛; Hung, Yu-hsun |
| 國立高雄師範大學 |
1995 |
Fabrication and analysis of camel-gate field-effect transistors (CAMFET’s) with active doping channel profiles
|
Jung-Hui Tsai;Wen-Chau Liu;Lih-Wen Laih;Kong-Beng Thei;Cheng-Zu Wu;Wen-Shiung Lour;Rong-Chau Liu; 蔡榮輝 |
| 國立聯合大學 |
2006 |
Fabrication and analysis of flow rate of parallel piezoelectric micropumps
|
C. H. Chang, H. Hocheng, Y. H. Guu |
| 淡江大學 |
2008-11 |
Fabrication and Analysis of Heat Dissipation Module for High-Power Light Emitting Diode Streetlamp
|
康尚文; Kang, Shung-wen; Chien, Kun-cheng; Chou, Yen-chih |
| 國立成功大學 |
2008-02-15 |
Fabrication and analysis of ionic conductive polymer films for micro drug delivery systems
|
Tsai, Nan-Chyuan; Sue, Chung-Yang |
| 國立臺灣科技大學 |
2009 |
Fabrication and analysis of microfluidic mold insert by micro electrical discharge machining
|
Lee J.-L.; Shen Y.-K.; Lin Y.; Teng P.-T.; Huang C.-M. |
