| 國立臺灣科技大學 |
2020 |
Injectable thermosensitive chitosan-based hydrogel containing ferulic acid for treating peripheral arterial disease
|
Wang, C.-Y.;Hsiao, C.-Y.;Tsai, K.-L.;Cheng, Y.-H. |
| 國立成功大學 |
2020 |
Injectable thermosensitive chitosan-based hydrogel containing ferulic acid for treating peripheral arterial disease
|
Wang, C.-Y.;Hsiao, C.-Y.;Tsai, K.-L.;Cheng, Y.-H. |
| 國家衛生研究院 |
2023-07-07 |
Injectable, micellar chitosan self-healing hydrogel for asynchronous dual-drug delivery to treat stroke rats
|
Lin, SH;Huang, APH;Hsu, SH |
| 臺大學術典藏 |
2020-01-17T07:48:39Z |
Injecting charges on large-area electret thin film by corona multi-pin discharge method
|
WEN-JONG WU; Lee, C.-K.; Wu, W.-J.; Yang, C.-H.; Ko, W.-C.; Chung, C.-E.; WEN-JONG WU;Lee, C.-K.;Wu, W.-J.;Yang, C.-H.;Ko, W.-C.;Chung, C.-E.;Su, Y.-H.; Su, Y.-H. |
| 臺大學術典藏 |
2020-04-28T07:12:14Z |
Injecting charges on large-area electret thin film by corona multi-pin discharge method
|
Su, Y.-H.; Chung, C.-E.; Ko, W.-C.; Yang, C.-H.; Wu, W.-J.; Lee, C.-K.; CHIH-KUNG LEE; Su, Y.-H.;Chung, C.-E.;Ko, W.-C.;Yang, C.-H.;Wu, W.-J.;Lee, C.-K. |
| 元培科技大學 |
2007 |
Injecting partially digested cartilage fragments into a biphasic scaffold to generate osteochondral composites
|
Liao, Chun-Jen;Lin, Yu-Ju;Chiang, Hong-Sen;Chiang, Shu-Fang;Wang, Yao-Horng;Jiang, Ching-Chua |
| 國立臺灣大學 |
2007 |
Injecting partially digested cartilage fragments into a biphasic scaffold to generate osteochondral composites in a nude mice model
|
廖俊仁; 林玉如; 江鴻生; 江淑芳; 王耀宏; 江清泉; LIAO, CHUN-JEN; LIN, YU-JU; CHIANG, HONG-SEN; CHIANG, SHU-FANG; WANG, YAO-HONG; JIANG, CHING-CHUAN |
| 國立臺灣大學 |
2007-06 |
Injecting partially digested cartilage fragments into a biphasic scaffold to generate osteochondral composites in a nude mice model
|
Liao, CJ; Lin, YJ; Chiang, H; Chiang, SF; Wang, YH; Jiang, CC |
| 臺大學術典藏 |
2018-09-10T06:16:16Z |
Injecting partially digested cartilage fragments into a biphasic scaffold to generate osteochondral composites in a nude mice model
|
Liao, C.-J.;Lin, Y.-J.;Chiang, H.;Chiang, S.-F.;Wang, Y.-H.;Jiang, C.-C.; Liao, C.-J.; Lin, Y.-J.; Chiang, H.; Chiang, S.-F.; Wang, Y.-H.; Jiang, C.-C.; CHING-CHUAN JIANG |
| 臺大學術典藏 |
2020-07-01T03:30:55Z |
Injecting partially digested cartilage fragments into a biphasic scaffold to generate osteochondral composites in a nude mice model
|
Liao C.-J.;Lin Y.-J.;Hongsen Chiang;Chiang S.-F.;Wang Y.-H.;Jiang C.-C.; Liao C.-J.; Lin Y.-J.; HONGSEN CHIANG; Chiang S.-F.; Wang Y.-H.; Jiang C.-C. |
| 國立交通大學 |
2014-12-08T15:18:37Z |
Injectio-locking laser-diode-based OC-192 optical non-return-to-zero-to-return-to-zero OR logic gate
|
Chang, YC; Lin, GR |
| 國立交通大學 |
2019-12-13T01:09:58Z |
Injection compression molding of transmission-type Fano resonance biochips for multiplex sensing applications
|
Lee, Kuang-Li; You, Meng-Lin; Shi, Xu; Li, Yi-Ru; Ueno, Kosei; Misawa, Hiroaki; Wei, Pei-Kuen |
| 臺大學術典藏 |
1993 |
Injection Current Model of a MOS Diode Under Charge Sharing Mode Readou Operation
|
Wu, C. W.; Lin, Hao-Hsiung; Wu, C. W.; 林浩雄; Lin, Hao-Hsiung |
| 國立臺灣大學 |
1993 |
Injection Current Model of a MOS Diode Under Charge Sharing Mode Readou Operation
|
Wu, C. W.; 林浩雄; Wu, C. W.; Lin, Hao-Hsiung |
| 臺大學術典藏 |
2020-06-11T06:39:45Z |
Injection Current Model of a MOS Diode under Charge-Sharing Mode Readout Operation
|
Wu, C.-W.;Lin, H.-H.; Wu, C.-W.; Lin, H.-H.; HAO-HSIUNG LIN |
| 國立交通大學 |
2014-12-12T02:09:59Z |
Injection locking of a pulsed TEA Co□ laser
|
黃玟焜; Huang, Wen-Kun; 祁甡; 梁振民; Qi, Shen; Liang-Zhen, Min |
| 臺大學術典藏 |
2018-09-10T08:47:02Z |
Injection method for microfluidic chips
|
Wei-Cheng Tian et. al.; WEI-CHENG TIAN |
| 國立高雄第一科技大學 |
2011.07 |
Injection molding and injection compression molding of thin-walled light-guided plates with V-grooved microfeatures
|
Huang, Ming-Shyan;Chung, Chin-Feng; 黃明賢 |
| 大葉大學 |
2006-01-10 |
Injection molding and injection compression molding of three-beam grating of DVD pickup lens
|
Wu, Cheng-Hsien;Chen, Wei-Shiu |
| 國立臺灣科技大學 |
1999 |
Injection molding of Fe-Ni-P composite powders prepared by electroless nickel plating and the magnetic properties of the sintered alloys
|
Tien-Yin Chan;Shun-Tian Lin |
| 國立臺灣科技大學 |
2019 |
Injection molding of liquid crystal polymer on Al plate with anodic aluminum oxide structure for heterogeneous bonding
|
Chen, Chen C.-C.A.;Wu, Wu W.-H.;Yu, C.-W. |
| 國立成功大學 |
2006-02 |
Injection molding of microprobe array parts
|
Chang, Pei-Chi; Hwang, Sheng-Jye |
| 國立臺灣科技大學 |
2003 |
Injection Molding of Oxide-reduced Copper Powders
|
Tien-Yin Chan;Ming-Shuing Chuang;Shun-Tian Lin |
| 臺大學術典藏 |
2020-01-13T08:23:27Z |
Injection molding of plastic plates combined with boss features on superplastic Zn-22Al sheet
|
SEN-YEU YANG; Parng, S.H.; Yang, S.Y. |
| 臺大學術典藏 |
2022-04-21T23:17:19Z |
Injection Molding of Plastic Plates Combined with Boss Features on Superplastic Zn-22Al Sheet
|
Yang, S. Y.; Parng, S. H. |
