|
"fan kuang chao"的相關文件
顯示項目 6-30 / 89 (共4頁)
1 2 3 4 > >>
每頁顯示[10|25|50]項目
| 南亞技術學院 |
2013-03 |
A novel dual-axis optoelectronic level with refraction principle
|
Torng, Jingsyan; Wang, Chih-Hsiung; Huang, Zih-Nan; Fan, Kuang-Chao |
| 臺大學術典藏 |
2013-02-06T09:57:12Z |
Sense and Control of a Companion Robot
|
Fan, Kuang-Chao; Chen, Pei-Kang; Lin, Hon-Ming; Wang, Hsiao-Wu; Wang, Fu-Cheng; Wang, Fu-Cheng; Wang, Hsiao-Wu; Lin, Hon-Ming; Chen, Pei-Kang; Fan, Kuang-Chao |
| 南亞技術學院 |
2012-04 |
3-D measurement and evaluation of surface texture produced by scraping process
|
Fan, Kuang-Chao;Torng, Jingsyan;Jywe, Wenyuh;Chou, Rui-Chen;Ye, Jyun-Kuan |
| 南亞技術學院 |
2012-04 |
3-D measurement and evaluation of surface texture produced by scraping process
|
Fan, Kuang-Chao;Torng, Jingsyan;Jywe, Wenyuh;Chou, Rui-Chen;Ye, Jyun-Kuan |
| 國立臺灣大學 |
2012 |
A BPNN-PID based long-stroke nanopositioning control scheme driven by ultrasonic motor
|
Cheng, Fang; Fan, Kuang-Chao; Miao, Jinwei; Li, Bai-Kun; Wang, Hung-Yu |
| 國立臺灣大學 |
2012 |
3-D measurement and evaluation of surface texture produced by scraping process
|
Fan, Kuang-Chao; Torng, Jingsyan; Jywe, Wenyuh; Chou, Rui-Chen; Ye, Jyun-Kuan |
| 國立臺灣大學 |
2012 |
Prediction of machining accuracy degradation of machine tools
|
Fan, Kuang-Chao; Chen, Hsi-Ming; Kuo, Tzu-Hsin |
| 國立臺灣大學 |
2012 |
Calibration and analysis of eccentric error of the laser rotary-scanning measurement system
|
Tsai, Tung-Hsien; Fan, Kuang-Chao |
| 臺大學術典藏 |
2012 |
A BPNN-PID based long-stroke nanopositioning control scheme driven by ultrasonic motor
|
Cheng, Fang; Fan, Kuang-Chao; Miao, Jinwei; Li, Bai-Kun; Wang, Hung-Yu; Cheng, Fang; Fan, Kuang-Chao; Miao, Jinwei; Li, Bai-Kun; Wang, Hung-Yu |
| 國立臺灣大學 |
2011 |
Linear diffraction grating interferometer with high alignment tolerance and high accuracy
|
Cheng, Fang; Fan, Kuang-Chao |
| 國立臺灣大學 |
2011 |
A Comparison of Polymer Composites for Development of Flexible Sensor Array
|
Shih, Wen-Pin; Lee, Chun-Lin; Lee, Chian-Wen; Tsao, Li-Chi; Yang, Yao-Joe; Fan, Kuang-Chao |
| 國立臺灣大學 |
2011 |
Design of a dual-axis optoelectronic level for precision angle measurements
|
Fan, Kuang-Chao; Wang, Tsung-Han; Lin, Sheng-Yi; Liu, Yen-Chih |
| 國立臺灣大學 |
2010 |
A 2 x 2 Split Cross-Bar Optical Switch Using a Hybrid Actuation Configuration
|
Liao, Bo-Ting; Chia, Bonnie Tingting; Shih, Sun-Chih; Fan, Kuang-Chao; Yang, Yao-Joe Joseph |
| 國立臺灣大學 |
2010 |
Development of auto defect classification system on porosity powder metallurgy products
|
Fan, Kuang-Chao; Chen, Shou-Hang; Chen, Jhih-Yuan; Liao, Wei-Bor |
| 國立臺灣大學 |
2010 |
A scanning contact probe for a micro-coordinate measuring machine (CMM)
|
Fan, Kuang-Chao; Cheng, Fang; Wang, Weili; Chen, Yejin; Lin, Jia-You |
| 國立臺灣大學 |
2010 |
Flexible Temperature Sensor Array Based on a Graphite-Polydimethylsiloxane Composite
|
Shih, Wen-Pin; Tsao, Li-Chi; Lee, Chian-Wen; Cheng, Ming-Yuan; Chang, Chienliu; Yang, Yao-Joe; Fan, Kuang-Chao |
| 國立臺灣大學 |
2010 |
The development of an 8 8 optical switch
|
Yang, Yao-Joe; Liao, Bo-Ting; Shih, Sun-Chih; Fan, Kuang-Chao |
| 國立臺灣大學 |
2009-07 |
A NxN Architecture for 2-D Mirror-Type Optical Switches
|
Chen, Shou-Heng; Fan, Kuang-Chao; Chung, Tien-Tung; Yang, Yao-Joe Joseph |
| 國立臺灣大學 |
2009-05 |
A 2x2 Mechanical Optical Switch With a Thin MEMS Mirror
|
Fan, Kuang-Chao; Lin, Wu-Lang; Chiang, Li-Hung; Chen, Shou-Heng; Chung, Tien-Tung; Yang, Yao-Joe |
| 國立臺灣大學 |
2009-05 |
Optimum Design of an 8x8 Optical Switch with Thermal Compensated Mechanisms
|
Chung, Tien-Tung; Lin, Chin-Te; Lee, Chung-Yun; Fan, Kuang-Chao; Chen, Shou-Heng |
| 國立臺灣大學 |
2008-12 |
Sense and Control of a Companion Robot
|
Wang, Fu-Cheng; Wang, Hsiao-Wu; Lin, Hon-Ming; Chen, Pei-Kang; Fan, Kuang-Chao |
| 國立臺灣大學 |
2008-06 |
Signal Detection and Control of an Intelligent Robot
|
Wang, Fu-Cheng; Lin, Hong-Min; Chen, Pei-Kang; Chang, Fu-Yui; Fan, Kuang-Chao |
| 國立臺灣大學 |
2008-03 |
Diffractive Laser Encoder with a Grating in Littrow Configuration
|
KAO, Ching-Fen; LU, Sheng-Hua; SHEN, Hsin-Mao; FAN, Kuang-Chao |
| 國立臺灣大學 |
2008 |
Sense and Control of a Companion Robot
|
Wang, Fu-Cheng; Wang, Hsiao-Wu; Lin, Hon-Ming; Chen, Pei-Kang; Fan, Kuang-Chao |
| 國立臺灣大學 |
2008 |
Development of a drop-on-demand droplet generator for one-drop-fill technology
|
Fan, Kuang-Chao; Chen, Jhih-Yuan; Wang, Ching-Hua; Pan, Wen-Chueh |
顯示項目 6-30 / 89 (共4頁)
1 2 3 4 > >>
每頁顯示[10|25|50]項目
|
