| 國立成功大學 |
2024-03 |
Chlorination for all solid-state zinc-graphite battery: Investigate into the charge-discharge mechanism of zinc electrodes and sodium silicate electrolyte
|
Hsiao;Yi-Fen;Hung;Fei-Yi;Zhao;-Ren, Jun |
| 國立成功大學 |
2024-03 |
Jet-Printable, Low-Melting-Temperature Ga-xSn Eutectic Composites: Application in All-Solid-State Batteries
|
Chen;Kuan-Jen;Hung;Fei-Yi;Liao;Hsien-Ching |
| 國立成功大學 |
2024-02-5 |
Advancements in microstructure, texture characterization, and mechanical properties of powder metallurgy Al-Si-Mg-Fe alloy for engineering applications
|
Chang;Kai-Chieh;Hung;Fei-Yi;Zhao;Jun-Ren;Miu;Chi-Fong |
| 國立成功大學 |
2024-02 |
Study on microstructure and charge-discharge mechanism of all solid-state indium-graphite batteries
|
Huang;Bo-Chin;Fan;Wen-Chin;Hung;Fei-Yi |
| 國立成功大學 |
2024-02 |
Effects of Heat-Treatment and Cold-Rolling on Mechanical Properties and Impact Failure Resistance of New Al 6082 Aluminum Alloy by Continuous Casting Direct Rolling Process
|
Zhao;Jun-Ren;Hung;Fei-Yi;Chen;Jian-Hong |
| 國立成功大學 |
2024-01 |
A new secondary battery technology: Electrode structure and charge-discharge mechanism of all-solid-state zinc-graphite batteries
|
Zhao;Jun-Ren;Wang;I-Hsiang;Hung;Fei-Yi |
| 國立成功大學 |
2024-01 |
A Study on Surface Modification Characteristics and Charge-Discharge Mechanism of Natural Serpentinite Ore Secondary Battery
|
Zhao;Jun-Ren;Chen;Kuan-Jen;Hung;Fei-Yi;Tsai;Yung-Yi;Wu;Po-Ting |
| 國立成功大學 |
2024-01 |
Application of New Al-Si Welding Filler with High Concentration of Copper and Magnesium: High-Temperature Strength and Anti-Corrosion Mechanism
|
Zhao;Jun-Ren;Hung;Fei-Yi;Pan;Chien-Yu |
| 國立成功大學 |
2024 |
Effects of Operating Temperatures and Discharge Currents Gallium-30Tin/ Natrium-Silicate/Graphite All-Solid-State Batteries
|
Chen;Kuan-Jen;Hung;Fei-Yi;Liao;Hsien-Ching |
| 國立成功大學 |
2023-12-1 |
Microstructure, mechanical properties and biomedical application of medical implantable extruded Mg-Zn-Zr-Ca alloy
|
Huang;Ying-Ting;Lee;Chen-Jie;Hung;Fei-Yi;Yen;Chen-Wei |
| 國立成功大學 |
2023-12 |
Microstructural Characteristics and Material Failure Mechanism of SLM Ti-6Al-4V-Zn Alloy
|
Cheng;Yi-Jin;Hung;Fei-Yi;Zhao;Jun-Ren |
| 國立成功大學 |
2023-11~2023-12 |
Effects of the microstructure and texture characteristics on mechanical properties of the Al-Ni-Cu-Fe alloy manufactured by laser powder bed fusion
|
Chang;Kai-Chieh;Zhao;Jun-Ren;Hung;Fei-Yi |
| 國立成功大學 |
2023-11 |
Effect of High Temperature and Thermal Cycle of 4043 Al Alloy Manufactured through Continuous Casting Direct Rolling
|
Huang;Bo-Chin;Hung;Fei-Yi |
| 國立成功大學 |
2023-09 |
Microstructure and fracture toughness of hot-rolling biomedical degradable ZKX500 magnesium bone plates
|
Huang;Ying-Ting;Hung;Fei-Yi;Yen;Chen-Wei |
| 國立成功大學 |
2023-08 |
Study of electrical and fatigue properties of copper micro-alloyed wires in IGBT subject to chloride corrosion
|
Wu;-Ding, Bo;Hung;Fei-Yi |
| 國立成功大學 |
2023-06 |
A Technology for Bonding Cu Wires with Cu Pads: Structure and Electrical Fatigue Mechanism of Fine Micro-alloyed Cu Wires
|
Zhao;Jun-Ren;Chen;Yu-Jen;Hung;Fei-Yi |
| 國立成功大學 |
2023-05 |
Study of tensile properties, electrothermal characteristics and packaging reliability on Cu-Pt-Au-Pd fine micro-alloyed wire
|
Hsu;Shen-Teng;Hung;Fei-Yi;Wu;Bo-Ding |
| 國立成功大學 |
2023-02 |
Metallographic Mechanism of Embrittlement of 15 μm Ultrafine Quaternary Silver Alloy Bonding Wire in Chloride Ions Environment
|
Zhao;Jun-Ren;Hung;Fei-Yi;Hsu;Che-Wei |
| 國立成功大學 |
2022-12 |
The electrothermal fracture mechanism between aluminum and copper wires
|
Wu;Bo-Ding;Hung;Fei-Yi |
| 國立成功大學 |
2022-11-29 |
Charge-Discharge Properties of Sputtered Mg Anode in Flexible All-Solid-State Mg-lon Batteries
|
Chen;Kuan-Jen;Hung;Fei-Yi;He;Yen-Ting |
| 國立成功大學 |
2022-10 |
Microstructure, Tensile Mechanical Properties and Electrical Fatigue Mechanism of a Microalloyed Copper Wire
|
Zhao;Jun-Ren;Lin;Yu-Che;Hung;Fei-Yi |
| 國立成功大學 |
2022-10 |
A Study on the Structure and Biomedical Application Characteristics of Phosphate Coatings on ZKX500 Magnesium Alloys
|
Huang;Ying-Ting;Wu;Wen-Yu;Hung;Fei-Yi;Kuan;Fa-Chuan;Hsu;Kai-Lan;Su;Wei-Ren;Yen;Chen-Wei |
| 國立成功大學 |
2022-06 |
A Novel Two-Stage Heat Treatment with Medium-Temperature Aging Influence on Microstructure, Al-3(Sc, Zr) Nanoprecipitation, and Application Properties, Enhancing Selective Laser Melting of Al-Mg-Sc-Zr Alloy
|
Zhao;Jun-Ren;Lee;Liang-Yan;Chang;Kai-Chieh;Hung;Fei-Yi |
| 國立成功大學 |
2022-01 |
Mechanical properties and biomedical application characteristics of degradable polylactic acid-Mg-Ca-3(PO4)(2) three-phase composite
|
Chen;Kuan-Jen;Hung;Fei-Yi;Wang;Yun-Ting;Yen;Chen-Wei |
| 國立成功大學 |
2021-11-25 |
Effects of hyper-high-temperature solid-solution treatment on microstructure evolution and nanoprecipitation of the Al-Ni-Cu-Fe-Zr-Sc alloy manufactured by selective laser melting
|
Chang;Kai-Chieh;Zhao;Jun-Ren;Hung;Fei-Yi |
| 國立成功大學 |
2021-11 |
Microstructure, Mechanical Properties, Degradation Behavior, and Implant Testing of Hot-Rolled Biodegradable ZKX500 Magnesium Alloy
|
Huang;Ying-Ting;Hung;Fei-Yi;Kuan;Fa-Chuan;Hsu;Kai-Lan;Su;Wei-Ren;Lin;Chia-Yen |
| 國立成功大學 |
2021-09 |
Study on Microstructure, Mechanical Properties and Erosion Characteristics of Al-Si Alloy Manufactured by Continuous Casting Direct Rolling Process
|
Huang;Bo-Chin;Chang;Kai-Chieh;Hung;Fei-Yi |
| 國立成功大學 |
2021-09 |
Effect of electrification and chlorination on the microstructure and electrical properties of fine Al wires
|
Wu;Bo-Ding;Hung;Fei-Yi |
| 國立成功大學 |
2021-08 |
Al2O3 Particle Erosion Induced Phase Transformation: Structure, Mechanical Property, and Impact Toughness of an SLM Al-10Si-Mg Alloy
|
Huang;Bo-Chin;Hung;Fei-Yi |
| 國立成功大學 |
2021-06 |
Comparison of Laser Powder Bed Fusion and Cast Inconel 713 Alloy in Terms of Their Microstructure, Mechanical Properties, and Fatigue Life
|
Zhao;Jun-Ren;Hung;Fei-Yi;Lu;Chien-Sheng;Lai;I-Chun |
| 國立成功大學 |
2021-03~2021-04 |
Effects of heat treatment on a novel continuous casting direct rolling 6056 aluminum alloy: cold rolling characteristics and tensile fracture properties
|
Zhao;Jun-Ren;Hung;Fei-Yi;Chen;Bo-Jou |
| 國立成功大學 |
2021-03 |
Novel photovoltaic ribbon technology: Interfacial behavior of In-50Sn alloy ribbon without metal matrix under electrothermal effects and chlorine corrosion
|
Chen;Kuan-Jen;Fang;Yu-Hui;Hung;Fei-Yi |
| 國立成功大學 |
2021-03 |
Optical, Microstructure, and Electromagnetic Properties of (1-x)ZnO - xCuO Powders Prepared Using Two-Stage Sintering and Direct Synthesis
|
Liu;Tai-Hsiang;Hung;Fei-Yi;Chen;Cheng-Hung;Chen;Kuan-Jen |
| 國立成功大學 |
2021-01 |
Microstructure, Mechanical Properties, and Fatigue Fracture Characteristics of High-Fracture-Resistance Selective Laser Melting Al-Ni-Cu Alloys
|
Chang;Kai-Chieh;Zhao;Jun-Ren;Hung;Fei-Yi |
| 國立成功大學 |
2020-11~2020-12 |
Interface behavior and electrical properties of Zn-Sn-Cu (CTZ) stacking layer films with thermal diffusion and electrically induced crystallization
|
Liu;Tai-Hsiang;Hung;Fei-Yi;Chen;Kuan-Jen |
| 國立成功大學 |
2020-11 |
Biodegradation ZK50 magnesium alloy compression screws: Mechanical properties, biodegradable characteristics and implant test
|
Chen;Yen-Ting;Hung;Fei-Yi;Lin;Yen-Ling;Lin;Chia-Yen |
| 國立成功大學 |
2020-07~2020-08 |
Improving the applicability of wear-resistant Al-10Si-0.5 Mg alloy obtained through selective laser melting with T6 treatment in high-temperature, and high-wear environments
|
Chen;Kuan-Jen;Hung;Fei-Yi;Lui;Truan-Sheng;Tsai;Chun-Lin |
| 國立成功大學 |
2020-06 |
Wedge bonding technologies: microstructure, mechanical properties and electrical properties of fine Al-Zn-Si alloy wire
|
Wu;Bo-Ding;Hung;Fei-Yi |
| 國立成功大學 |
2020-05~2020-06 |
Microstructure and tensile fracture behavior of three -stage heat treated inconel 718 alloy produced via laser powder bed fusion process
|
Zhao;Jun-Ren;Hung;Fei-Yi;Lui;Truan-Sheng |
| 國立成功大學 |
2020-03 |
Microstructure, optical, electrical, and magnetic properties of ZnO/CuO thin films prepared using two-stage magnetron sputtering and diffusion doping process
|
Liu;Tai-Hsiang;Hung;Fei-Yi;Chen;Cheng-Hung;Chen;Kuan-Jen |
| 國立成功大學 |
2020-03 |
A New Infrared Heat Treatment on Hot Forging 7075 Aluminum Alloy: Microstructure and Mechanical Properties
|
Chang;Yi-Ling;Hung;Fei-Yi;Lui;Truan-Sheng |
| 國立成功大學 |
2020-01 |
Opto-electromagnetic properties of carbon-doped zinc-oxide prepared using electrically induced crystallization and ion implantation process for gas sensor application
|
Liu;Tai-Hsiang;Hung;Fei-Yi;Chien;Tao;Chen;Kuan-Jen |
| 國立成功大學 |
2020-01 |
Erosion Resistance and Particle Erosion-Induced Tensile Embrittlement of 3D-Selective Laser Melting Inconel 718 Superalloy
|
Zhao;Jun-Ren;Hung;Fei-Yi;Lui;Truan-Sheng |
| 國立成功大學 |
2019-12 |
Study of electrical fatigue test in gold-coated siliver-4 wt.% palladium bonding wire
|
Ho;Chen-Chin;Chen;Kuan-Jen;Hung;Fei-Yi;Lui;Truan-Sheng |
| 國立成功大學 |
2019-08 |
Biodegradable Implantation Material: Mechanical Properties and Surface Corrosion Mechanism of Mg-1Ca-0.5Zr Alloy
|
Chen;Yen-Ting;Hung;Fei-Yi;Syu;Jie-Cheng |
| 國立成功大學 |
2019-08 |
Low Conductivity Decay of Sn-0.7Cu-0.2Zn Photovoltaic Ribbons for Solar Cell Application
|
Chen;Kuan-Jen;Hung;Fei-Yi;Lui;Truan-Sheng;Hsu;Lin |
| 國立成功大學 |
2019-07 |
A Study of the Sulfidation Behavior on Palladium-Coated Copper Wire with a Flash-Gold Layer (PCA) after Wire Bonding
|
Chen;Kuan-Jen;Hung;Fei-Yi;Chang;Chia-Yun |
| 國立成功大學 |
2019-07 |
Particle Erosion Induced Phase Transformation of Different Matrix Microstructures of Powder Bed Fusion Ti-6Al-4V Alloy Flakes
|
Zhao;Jun-Ren;Hung;Fei-Yi;Lui;Truan-Sheng |
| 國立成功大學 |
2019-05~2019-06 |
Impact of solid-solution treatment on microstructural characteristics and formability of rotary-swaged 2024 alloy tubes
|
Lin;Chia-Wei;Chen;Kuan-Jen;Hung;Fei-Yi;Lui;Truan-Sheng;Chen;Hsuan-Po |
| 國立成功大學 |
2019-05 |
The Relationship of Fracture Mechanism between High Temperature Tensile Mechanical Properties and Particle Erosion Resistance of Selective Laser Melting Ti-6Al-4V Alloy
|
Zhao;Jun-Ren;Hung;Fei-Yi;Lui;Truan-Sheng;Wu;Yu-Lin |
