| 國立臺灣大學 |
2000 |
Exponentially stable non-linear control for speed regulation of induction motor with field-oriented PI-controller
|
Lee, Hou-Tsan; Chang, Jaion-Shea; Fu, Li-Chen |
| 國立臺灣大學 |
2000 |
Intelligent robot deburring using adaptive fuzzy hybridposition/force control
|
Hsu, Feng-Yi; Fu, Li-Chen |
| 國立臺灣大學 |
2000 |
Non-linear sensorless indirect adaptive speed control of induction motor with unknown rotor resistance and load
|
Lin, Yu-Chao; Fu, Li-Chen; Tsai, Chin-Yu |
| 國立臺灣大學 |
2000 |
Modelling, control and simulation of an IC wafer fabrication system: a generalized stochastic coloured timed Petri Net approach
|
Lin, Ming-Hung; Fu, Li-Chen |
| 臺大學術典藏 |
2000 |
Dynamic Scheduling Approach to Group Control of Elevator Systems with Learning Ability.
|
Ho, Yuan-Wei; Fu, Li-Chen; LI-CHEN FU |
| 臺大學術典藏 |
2000 |
Petri-Net and GA Based Approach to Modeling, Scheduling, and Performance Evaluation for Wafer Fabrication.
|
Lin, Ming-Hung; Fu, Li-Chen; Chen, Jyh-Horng; LI-CHEN FU |
| 國立臺灣大學 |
1999-12 |
Dual-axis Maglev guiding system modeling and controller design for wafer transportation
|
Chen, Mei-Yung; Wang, Ming-Jyh; Fu, Li-Chen |
| 臺大學術典藏 |
1999-12 |
Dual-axis Maglev guiding system modeling and controller design for wafer transportation
|
Chen, Mei-Yung; Wang, Ming-Jyh; Fu, Li-Chen; Chen, Mei-Yung; Wang, Ming-Jyh; Fu, Li-Chen |
| 國立臺灣大學 |
1999-10 |
New approach combining numerical technique and simulation for analysis of large discrete event systems based on Petri nets
|
Lin, Ming-Hung; Fu, Li-Chen |
| 國立臺灣大學 |
1999-10 |
Modeling, analysis, simulation and control of semiconductor manufacturing systems: a generalized stochastic colored timed Petri net approach
|
Lin, Ming-Hung; Fu, Li-Chen |
| 國立臺灣大學 |
1999-10 |
Modeling of priority queueing service in discrete event systems using hybrid Petri nets
|
Lin, Ming-Hung; Fu, Li-Chen |
| 臺大學術典藏 |
1999-10 |
New approach combining numerical technique and simulation for analysis of large discrete event systems based on Petri nets
|
Lin, Ming-Hung; Fu, Li-Chen; Lin, Ming-Hung; Fu, Li-Chen |
| 臺大學術典藏 |
1999-10 |
Modeling, analysis, simulation and control of semiconductor manufacturing systems: a generalized stochastic colored timed Petri net approach
|
Lin, Ming-Hung; Fu, Li-Chen; Lin, Ming-Hung; Fu, Li-Chen |
| 臺大學術典藏 |
1999-10 |
Modeling of priority queueing service in discrete event systems using hybrid Petri nets
|
Lin, Ming-Hung; Fu, Li-Chen; Lin, Ming-Hung; Fu, Li-Chen |
| 國立臺灣大學 |
1999-08 |
Robust output high-gain feedback controllers for the atomic force microscope under high data sampling rate
|
Hsu, Su-Hau; Fu, Li-Chen |
| 臺大學術典藏 |
1999-08 |
Robust output high-gain feedback controllers for the atomic force microscope under high data sampling rate
|
Hsu, Su-Hau; Fu, Li-Chen; Hsu, Su-Hau; Fu, Li-Chen |
| 國立臺灣大學 |
1999-06 |
Nonlinear sensorless indirect adaptive speed control of induction motor with unknown rotor resistance and load
|
Lin, Yu-Chao; Fu, Li-Chen; Tsai, Chin-Yu |
| 國立臺灣大學 |
1999-06 |
A nonlinear missile guidance controller with pulse type input devices
|
Fu, Li-Chen; Tsai, Chi-Wang; Yeh, Fu-Kuang |
| 國立臺灣大學 |
1999-06 |
Modeling and controller design of a MAGLEV guiding system for application in precision positioning
|
Chen, Mei-Yung; Wang, Ming-Jyh; Fu, Li-Chen |
| 國立臺灣大學 |
1999-06 |
5D target trajectory detection via intelligent monocular visual tracking system in real-time with air-target orientation recognition
|
Chen, Chih-Yu; Fu, Li-Chen |
| 臺大學術典藏 |
1999-06 |
Nonlinear sensorless indirect adaptive speed control of induction motor with unknown rotor resistance and load
|
Lin, Yu-Chao; Fu, Li-Chen; Tsai, Chin-Yu; Lin, Yu-Chao; Fu, Li-Chen; Tsai, Chin-Yu |
| 臺大學術典藏 |
1999-06 |
A nonlinear missile guidance controller with pulse type input devices
|
Fu, Li-Chen; Tsai, Chi-Wang; Yeh, Fu-Kuang; Fu, Li-Chen; Tsai, Chi-Wang; Yeh, Fu-Kuang |
| 臺大學術典藏 |
1999-06 |
Modeling and controller design of a MAGLEV guiding system for application in precision positioning
|
Wang, Ming-Jyh; Fu, Li-Chen; Chen, Mei-Yung; Wang, Ming-Jyh; Fu, Li-Chen; Chen, Mei-Yung |
| 臺大學術典藏 |
1999-06 |
5D target trajectory detection via intelligent monocular visual tracking system in real-time with air-target orientation recognition
|
Chen, Chih-Yu; Fu, Li-Chen; Chen, Chih-Yu; Fu, Li-Chen |
| 國立臺灣大學 |
1999-05 |
A new generation of evaluation tool for online design and scheduling in an advanced manufacturing system
|
Lin, Ming-Hung; Fu, Li-Chen |
| 國立臺灣大學 |
1999-05 |
Virtual factory-a novel testbed for an advanced flexible manufacturing system
|
Lin, Ming-Hung; Fu, Li-Chen; Shih, Teng-Jei |
| 國立臺灣大學 |
1999-05 |
A new adaptive fuzzy hybrid force/position control for intelligent robot deburring
|
Hsu, Feng-Yih; Fu, Li-Chen |
| 臺大學術典藏 |
1999-05 |
A new generation of evaluation tool for online design and scheduling in an advanced manufacturing system
|
Lin, Ming-Hung; Fu, Li-Chen; Lin, Ming-Hung; Fu, Li-Chen |
| 臺大學術典藏 |
1999-05 |
Virtual factory-a novel testbed for an advanced flexible manufacturing system
|
Lin, Ming-Hung; Fu, Li-Chen; Shih, Teng-Jei; Lin, Ming-Hung; Fu, Li-Chen; Shih, Teng-Jei |
| 臺大學術典藏 |
1999-05 |
A new adaptive fuzzy hybrid force/position control for intelligent robot deburring
|
Hsu, Feng-Yih; Fu, Li-Chen; Hsu, Feng-Yih; Fu, Li-Chen |
| 臺大學術典藏 |
1999 |
Virtual Factory: A Novel Testbed for an Advanced Flexible Manufacturing System.
|
LI-CHEN FU; Shih, Teng-Jei; Fu, Li-Chen; Lin, Ming-Hung |
| 國立臺灣大學 |
1998-12 |
Petri net based modeling and GA based scheduling for a flexible manufacturing system
|
Chung, Yung-Yi; Fu, Li-Chen; Lin, Ming-Wei |
| 國立臺灣大學 |
1998-12 |
Nonlinear adaptive sensorless speed control of induction motors
|
Chang, Ren-Jye; Fu, Li-Chen |
| 國立臺灣大學 |
1998-12 |
A novel adaptive fuzzy variable structure control for a class of nonlinear uncertain systems via backstepping
|
Hsu, Feng-Yih; Fu, Li-Chen |
| 臺大學術典藏 |
1998-12 |
Petri net based modeling and GA based scheduling for a flexible manufacturing system
|
Chung, Yung-Yi; Fu, Li-Chen; Lin, Ming-Wei; Chung, Yung-Yi; Fu, Li-Chen; Lin, Ming-Wei |
| 臺大學術典藏 |
1998-12 |
Nonlinear adaptive sensorless speed control of induction motors
|
Chang, Ren-Jye; Fu, Li-Chen; Chang, Ren-Jye; Fu, Li-Chen |
| 臺大學術典藏 |
1998-12 |
A novel adaptive fuzzy variable structure control for a class of nonlinear uncertain systems via backstepping
|
Hsu, Feng-Yih; Fu, Li-Chen; Hsu, Feng-Yih; Fu, Li-Chen |
| 國立臺灣大學 |
1998-05 |
Systematic creation and application of virtual factory with object oriented concept
|
Lin, Ming-Hung; Fu, Li-Chen |
| 國立臺灣大學 |
1998-05 |
Multi-agent based dynamic scheduling for a flexible assembly system
|
Chen, Yung-Yu; Fu, Li-Chen; Chen, Yu-Chien |
| 國立臺灣大學 |
1998-05 |
Multi-agent based control kernel for flexible automated production system
|
Liu, Sung-Hahn; Fu, Li-Chen; Yang, Jung-Hua |
| 國立臺灣大學 |
1998-05 |
Dynamic scheduling of elevator systems over hybrid Petri net/rule modeling
|
Huang, Ya-Hau; Fu, Li-Chen |
| 國立臺灣大學 |
1998-05 |
Adaptive hybrid force/position control of a flexible manipulator for automated deburring with online cutting trajectory modification
|
Lin, I-Ching; Fu, Li-Chen |
| 臺大學術典藏 |
1998-05 |
Systematic creation and application of virtual factory with object oriented concept
|
Lin, Ming-Hung; Fu, Li-Chen; Lin, Ming-Hung; Fu, Li-Chen |
| 臺大學術典藏 |
1998-05 |
Multi-agent based control kernel for flexible automated production system
|
Liu, Sung-Hahn; Fu, Li-Chen; Yang, Jung-Hua; Liu, Sung-Hahn; Fu, Li-Chen; Yang, Jung-Hua |
| 臺大學術典藏 |
1998-05 |
Adaptive hybrid force/position control of a flexible manipulator for automated deburring with online cutting trajectory modification
|
Lin, I-Ching; Fu, Li-Chen; Lin, I-Ching; Fu, Li-Chen |
| 臺大學術典藏 |
1998-05 |
Dynamic scheduling of elevator systems over hybrid Petri net/rule modeling
|
Huang, Ya-Hau; Fu, Li-Chen; Huang, Ya-Hau; Fu, Li-Chen |
| 國立臺灣大學 |
1998 |
A skew-symmetric property of rigid-body systems
|
Lian, Kuang-Yow; Wang, Li-Sheng; Fu, Li-Chen |
| 臺大學術典藏 |
1998 |
Intelligent air-target tracking and aiming mechanism via visual servoing
|
LI-CHEN FU; Kuo, Te-Son; Fu, Li-Chen; Chen, Chih-Yu |
| 臺大學術典藏 |
1998 |
Adaptive Hybrid Force/Position Control of a Flexible Manipulator for Automated Deburring with On-line Cutting Trajectory Modification.
|
Lin, I-Ching; Fu, Li-Chen; LI-CHEN FU |
| 臺大學術典藏 |
1998 |
Multi-agent Based Dynamic Scheduling for a Flexible Assembly System.
|
Chen, Yung-Yu; Fu, Li-Chen; Chen, Yu-Chien; LI-CHEN FU |