| 臺大學術典藏 |
2018-09-10T07:27:49Z |
Fuzzy sliding mode controlled slider-crank mechanism using a PM synchronous servo motor drive
|
Fung, Rong-Fong; Chen, Ken-Wang; Yen, Jia-Yush; Fung, R.-F.; Chen, K.-W.; Yen, J.-Y.; JIA-YUSH YEN; Fung, Rong-Fong; Chen, Ken-Wang; Yen, Jia-Yush |
| 國立高雄第一科技大學 |
2015 |
The multi-objective optimisation design for a light guide rod
|
Yang, Yu-Sen;Shih, Chun-Yao;Chien, Hong-Yao;Fung, Rong-Fong |
| 國立高雄第一科技大學 |
2014.06 |
Envelope extraction based dimension reduction for independent component analysis in fault diagnosis of rolling element bearing
|
Guo, Yu;Na, Jing;Li, Bin;Fung, Rong-Fong |
| 國立高雄第一科技大學 |
2014.06 |
Trajectory planning based on minimum absolute input energy for an LCD glass-handling robot
|
Fung, Rong-Fong;Cheng, Yi-Hsin |
| 國立高雄第一科技大學 |
2014.04 |
Dynamic modelling and input-energy comparison for the elevator system
|
Chen, Kun-Yung;Huang, Ming-Shyan;Fung, Rong-Fong |
| 國立高雄第一科技大學 |
2014.02 |
Energy-Saving Trajectory Planning for a Toggle Mechanism Driven by a PMSM
|
Hsu, Yi-Lung;Fung, Rong Fong |
| 國立高雄第一科技大學 |
2013/01 |
Mathematical Modelling of the Toggle Mechanism Driven by a Permanent Magnet Synchronous Motor
|
Fung, Rong-Fong; 馮榮豐 |
| 國立高雄第一科技大學 |
2013.08 |
Minimum Input Energy Trajectory Design of the Mechatronic Elevator System
|
Chen, Kun Yung;Huang, Ming Shyan;Fung, Rong Fong |
| 國立高雄第一科技大學 |
2012.12 |
Envelope order tracking for fault detection in rolling element bearings
|
Guo, Yu;Liu, Ting-Wei;Na, Jing;Fung, Rong-Fong; 馮榮豐 |
| 國立高雄第一科技大學 |
2012.10 |
The Combined Multi-objective Optimization Design for a Light Guide Rod
|
Yang, Yu-Sen;Shih, Chun-Yao;Chien, Hong-Yao;Fung, Rong-Fong |
| 國立高雄第一科技大學 |
2012.06 |
System identification of a Scott–Russell amplifying mechanism with offset driven by a piezoelectric actuator
|
Chen, Ching-Ming;Hsu, Yen-Chun;Fung, Rong-Fong; 馮榮豐 |
| 國立高雄第一科技大學 |
2011/04/11 |
Force/Motion Sliding Mode Control of Three Typical Mechanisms
|
Fung, Rong-Fong;Chang, Chin-Fu; 馮榮豐 |
| 國立高雄第一科技大學 |
2011.12 |
An Minimum-Energy-Based High-Degree Polynomial Trajectory Planning and Tracking Control for an LCD Glass-handling Robot
|
Fung, Rong-Fong;Cheng, Yi-Hsin; 馮榮豐 |
| 國立高雄第一科技大學 |
2011.10 |
Graphic supervisory control of an automatic optical inspection for LED properties
|
Fung, Rong-Fong;Yang, Chih-Yu;Lai, Ching-Tsung; 馮榮豐 |
| 國立高雄第一科技大學 |
2011.09 |
Key design parameters and optimal design of a five-point double-toggle clamping mechanism
|
Huang, Ming-Shyan;Lin, Tsung-Yen;Fung, Rong-Fong; 黃明賢 |
| 國立高雄第一科技大學 |
2011.09 |
System Identification and Adaptive Tracking Control for a 3-DOF LCD Glass-handling Robot
|
Fung, Rong-Fong;You, Sin-Syun; 馮榮豐 |
| 國立高雄第一科技大學 |
2010/04/01 |
Vision-Based Control of the Mechatronic System
|
Fung, Rong-Fong;Chen, Kun-Yung |
| 國立高雄第一科技大學 |
2010.09 |
System identification of a pick-and-place mechanism driven by a permanent magnet synchronous motor
|
Fung, Rong-Fong;Chiang, Chin-Lung;Wu, Guo-Ching; 馮榮豐 |
| 國立高雄第一科技大學 |
2010.08 |
Comparison between mathematical modeling and experimental identification of a spatial slider–crank mechanism
|
Huang, Ming-Shyan;Chen, Kun-Yung;Fung, Rong-Fong; 黃明賢 |
| 國立高雄第一科技大學 |
2010.05 |
Dynamic analysis and system identification of an LCD glass-handling robot driven by a PMSM
|
Fung, Rong-Fong;Kung, Ying- Shieh;Wu, Guo-Ching; 馮榮豐 |
| 國立高雄第一科技大學 |
2010.01 |
System Identification and Contour Tracking of a Plane-Type 3-DOF (X, Y, θz) Precision Positioning Table
|
Fung, Rong-Fong;Lin, Wang-Chi; 馮榮豐 |
| 國立高雄第一科技大學 |
2009.11 |
FPGA-based adaptive backstepping fuzzy control for a micro-positioning Scott-Russell mechanism
|
Fung, Rong-Fong;Weng, Ming-Hong;Kung, Ying-Shieh; 馮榮豐 |
| 國立高雄第一科技大學 |
2009.09 |
Applying Modified MIMO DIVSC to Synchronism and Tension Control of Dual Motor Systems
|
Chuang, Chin-Wen;Chiang, Chin-Lung;Kao, Chih-Cheng;Fung, Rong-Fong; 馮榮豐 |
| 國立高雄第一科技大學 |
2009.07 |
Using the modified PSO method to identify a Scott-Russell mechanism actuated by a piezoelectric element
|
Kao, Chih-Cheng;Fung, Rong-Fong; 馮榮豐 |
| 國立高雄第一科技大學 |
2009.06 |
Dynamic analysis of a non-conservative band-wheel system with a moving boundary Part 1: Mathematical modelling
|
Fung, Rong-Fong;Cheng, Wen-Hon; 馮榮豐 |
