| 國立高雄第一科技大學 |
2012.06 |
System identification of a Scott–Russell amplifying mechanism with offset driven by a piezoelectric actuator
|
Chen, Ching-Ming;Hsu, Yen-Chun;Fung, Rong-Fong; 馮榮豐 |
| 國立高雄第一科技大學 |
2011/04/11 |
Force/Motion Sliding Mode Control of Three Typical Mechanisms
|
Fung, Rong-Fong;Chang, Chin-Fu; 馮榮豐 |
| 國立高雄第一科技大學 |
2011.12 |
An Minimum-Energy-Based High-Degree Polynomial Trajectory Planning and Tracking Control for an LCD Glass-handling Robot
|
Fung, Rong-Fong;Cheng, Yi-Hsin; 馮榮豐 |
| 國立高雄第一科技大學 |
2011.10 |
Graphic supervisory control of an automatic optical inspection for LED properties
|
Fung, Rong-Fong;Yang, Chih-Yu;Lai, Ching-Tsung; 馮榮豐 |
| 國立高雄第一科技大學 |
2011.09 |
Key design parameters and optimal design of a five-point double-toggle clamping mechanism
|
Huang, Ming-Shyan;Lin, Tsung-Yen;Fung, Rong-Fong; 黃明賢 |
| 國立高雄第一科技大學 |
2011.09 |
System Identification and Adaptive Tracking Control for a 3-DOF LCD Glass-handling Robot
|
Fung, Rong-Fong;You, Sin-Syun; 馮榮豐 |
| 國立高雄第一科技大學 |
2010/04/01 |
Vision-Based Control of the Mechatronic System
|
Fung, Rong-Fong;Chen, Kun-Yung |
| 國立高雄第一科技大學 |
2010.09 |
System identification of a pick-and-place mechanism driven by a permanent magnet synchronous motor
|
Fung, Rong-Fong;Chiang, Chin-Lung;Wu, Guo-Ching; 馮榮豐 |
| 國立高雄第一科技大學 |
2010.08 |
Comparison between mathematical modeling and experimental identification of a spatial slider–crank mechanism
|
Huang, Ming-Shyan;Chen, Kun-Yung;Fung, Rong-Fong; 黃明賢 |
| 國立高雄第一科技大學 |
2010.05 |
Dynamic analysis and system identification of an LCD glass-handling robot driven by a PMSM
|
Fung, Rong-Fong;Kung, Ying- Shieh;Wu, Guo-Ching; 馮榮豐 |
| 國立高雄第一科技大學 |
2010.01 |
System Identification and Contour Tracking of a Plane-Type 3-DOF (X, Y, θz) Precision Positioning Table
|
Fung, Rong-Fong;Lin, Wang-Chi; 馮榮豐 |
| 國立高雄第一科技大學 |
2009.11 |
FPGA-based adaptive backstepping fuzzy control for a micro-positioning Scott-Russell mechanism
|
Fung, Rong-Fong;Weng, Ming-Hong;Kung, Ying-Shieh; 馮榮豐 |
| 國立高雄第一科技大學 |
2009.09 |
Applying Modified MIMO DIVSC to Synchronism and Tension Control of Dual Motor Systems
|
Chuang, Chin-Wen;Chiang, Chin-Lung;Kao, Chih-Cheng;Fung, Rong-Fong; 馮榮豐 |
| 國立高雄第一科技大學 |
2009.07 |
Using the modified PSO method to identify a Scott-Russell mechanism actuated by a piezoelectric element
|
Kao, Chih-Cheng;Fung, Rong-Fong; 馮榮豐 |
| 國立高雄第一科技大學 |
2009.06 |
Dynamic analysis of a non-conservative band-wheel system with a moving boundary Part 1: Mathematical modelling
|
Fung, Rong-Fong;Cheng, Wen-Hon; 馮榮豐 |
| 國立高雄第一科技大學 |
2009.06 |
Dynamic analysis of a non-conservative band–wheel system with a moving boundary part 2: Numerical results
|
Fung, Rong-Fong;Cheng, Wen-Hon; 馮榮豐 |
| 國立高雄第一科技大學 |
2009.05 |
Dynamic modelling of an intermittent slider–crank mechanism
|
Fung, Rong-Fong;Chiang, Chin-Lung;Chen, Shin-Jen; 馮榮豐 |
| 國立高雄第一科技大學 |
2009.05 |
Numerical and experimental identifications of a motor-toggle mechanism
|
Huang, Ming-Shyan;Chen, Kun-Yung;Fung, Rong-Fong; 黃明賢 |
| 國立高雄第一科技大學 |
2009.03 |
FORCE/MOTION SLIDINGMODE CONTROL OF THREE TYPICALMECHANISMS
|
Fung, Rong-Fong;Chang, Chin-Fu; 馮榮豐 |
| 國立高雄第一科技大學 |
2009.02 |
Synchronization and tension control of dual motor systems via MIMO discrete pseudo model following integral variable structure control
|
Chuang, Chin-Wen;Haung, Chin-Liang;Lee, Chun-Dar;Kao, Chih-Cheng;Fung, Rong-Fong; 馮榮豐 |
| 國立高雄第一科技大學 |
2009.01 |
Realization of a Motion Control IC for X−Y Table Based on Novel FPGA Technology
|
Kung, Ying-Shieh;Fung, Rong-Fong;Tai, Ting-Yu; 馮榮豐 |
| 國立高雄第一科技大學 |
2009.01 |
System identification of a dual-stage XY precision positioning table
|
Fung, Rong-Fong;Hsu, Yi-Lung;Huang, Ming-Shyan; 黃明賢 |
| 國立高雄第一科技大學 |
2008.12 |
Mechanical design and motion analysis of a pick-and-place mechanism
|
Chiang, Chin-Lung;Fung, Rong-Fong; 馮榮豐 |
| 國立高雄第一科技大學 |
2008.09 |
Dynamic modeling of a high-precision self-moving stage with various frictional models
|
Fung, Rong-Fong;Han, Chang-Fu;Chang, Jer-Rong; 馮榮豐 |
| 國立高雄第一科技大學 |
2008.09 |
Dynamic responses of the impact drive mechanism modeled by the distributed parameter system
|
Fung, Rong-Fong;Han, Chang-Fu;Ha, Jih-Lian; 馮榮豐 |
| 國立高雄第一科技大學 |
2008.05 |
Adaptive vision-based control of a motor-toggle mechanism: Simulations and experiments
|
Chuang, Chin-Wen;Huang, Ming-Shyan;Chen, Kun-Yung;Fung, Rong-Fong; 黃明賢 |
| 國立高雄第一科技大學 |
2007.08 |
Nonlinear dynamic behavior of a moving viscoelastic string undergoing three-dimensional vibration
|
Ha, Jih-Lian;Chang, Jer-Rong;Fung, Rong-Fong; 馮榮豐 |
| 國立高雄第一科技大學 |
2007.06 |
Upper Bound Solution to Compression Forming of Three-Layer Bounded Clad Sheet
|
Huang, Ming Nan;Tzou, Gow Yi;Fung, Rong Fong; 馮榮豐 |
| 國立高雄第一科技大學 |
2007.02 |
Application of the Nonlinear, Double-Dynamic Taguchi Method to the Precision Positioning Device Using Combined Piezo-VCM Actuator
|
Liu, Yung-Tien;Fung, Rong-Fong;Wang, Chun-Chao; 馮榮豐 |
| 國立高雄第一科技大學 |
2007.01 |
Methods of estimating luminous flux of the backlight module by luminance measurement
|
Fung, Rong-Fong;Chang, Liang-Kang;Lin, Chi-Feng; 馮榮豐 |
| 國立高雄第一科技大學 |
2006.10 |
The self-tuning PID control in a slider–crank mechanism system by applying particle swarm optimization approach
|
Kao, Chih-Cheng;Chuang, Chin-Wen;Fung, Rong-Fong; 馮榮豐 |
| 國立高雄第一科技大學 |
2006.02 |
Dynamic modeling and identification of a slider-crank mechanism
|
Ha, Jih-Lian;Fung, Rong-Fong;Chen, Kun-Yung;Hsien, Shao-Chien; 馮榮豐 |
| 國立高雄第一科技大學 |
2006.02 |
Effects of Frictional Models on the Dynamic Response of the Impact Drive Mechanism
|
Ha, Jih-Lian;Fung, Rong-Fong;Chang, Jer-Rong;Han, Chang-Fu; 馮榮豐 |
| 國立高雄第一科技大學 |
2006.01 |
Optimal design of a micro-positioning Scott-Russell mechanism by Taguchi method
|
Ha, Jih-Lian;Kung, Ying-Shieh;Hu, Sheng-Chuen;Fung, Rong-Fong; 馮榮豐 |
| 國立高雄第一科技大學 |
2006.01 |
Quantitative determination of material viscoelasticity using a piezoelectric cantilever bimorph beam
|
Ha, Jih-Lian;Fung, Rong-Fong;Chang, Sheng-Hsin; 馮榮豐 |
| 國立高雄第一科技大學 |
2005.12 |
Dynamic model of an electromagnetic actuator for vibration control of a cantilever beam with a tip mass
|
Fung, Rong-Fong;Liu, Yung-Tien;Wang, Chun-Chao; 馮榮豐 |
| 國立高雄第一科技大學 |
2005.12 |
Dynamic Responses of an Atomic Force Microscope Interacting with Samples
|
Ha, Jih-Lian;Fung, Rong-Fong;Chen, Yi-Chan; 馮榮豐 |
| 國立高雄第一科技大學 |
2005.10 |
Precision position control using combined piezo-VCM actuators
|
Liu, Yung-Tien;Fung, Rong-Fong;Wang, Chun-Chao; 劉永田 |
| 國立高雄第一科技大學 |
2005.06 |
Optimization of an impact drive mechanism based on real-coded genetic algorithm
|
Ha, Jih-Lian;Fung, Rong-Fong;Han, Chang-Fu; 馮榮豐 |
| 國立高雄第一科技大學 |
2005.05 |
Hysteresis identification and dynamic responses of the impact drive mechanism
|
Ha, Jih-Lian;Fung, Rong-Fong;Yang, Chung-Shiang; 馮榮豐 |
| 國立高雄第一科技大學 |
2005.04 |
RFNN Control for PMLSM Drive via Backstepping Technique
|
LIN, FAA-JENG;SHEN, PO-HUNG;FUNG, RONG-FONG; 馮榮豐 |
| 國立高雄第一科技大學 |
2004.07 |
Dynamic responses of a precision positioning table impacted by a soft-mounted piezoelectric actuator
|
Liu, Yung-Tien;Fung, Rong-Fong;Huang, Tai-Kun; 劉永田;馮榮豐 |
| 國立高雄第一科技大學 |
2004.06 |
A PNEUMATIC POSITIONING DEVICE COUPLED WITH PIEZOELECTRIC SELF-MOVING MECHANISM
|
Liu, Yung-Tien;Lee, Chen-Hao;Fung, Rong-Fong; 劉永田;馮榮豐 |
| 國立高雄第一科技大學 |
2004.03 |
Precision Control of a Piezoceramic Actuator Using Neural Networks
|
Kung, Ying-Shieh;Fung, Rong-Fong; 馮榮豐 |
| 國立高雄第一科技大學 |
2003/06/16 |
Multi-degree-of-freedom of precision positioning device using spring-mounted electromechanical actuators
|
Liu, Yung-Tien; Fung, Rong-Fong; Wang, Jiunn-Chau; 劉永田; 馮榮豐 |
| 國立高雄第一科技大學 |
2003.12 |
Dynamic Responses of a Self-Moving Precision Positioning Stage Impacted by a Spring-Mounted Piezoelectric Actuator
|
Fung, Rong-Fong;Higuchi, Toshiro;Liu, Yung-Tien;Huang, Tai-Kun; 劉永田;馮榮豐 |
| 國立高雄第一科技大學 |
2003.06 |
Parametric control of an axially moving string via fuzzy sliding-mode and fuzzy neural network methods
|
Huang, Jeng-Sheng;Paul, C.-P.Chao;Fung, Rong-Fong; 馮榮豐 |
| 國立高雄第一科技大學 |
2003.01 |
A novel precision positioning table utilizing impact force of spring-mounted piezoelectric actuator—part I: experimental design and results
|
Liu, Yung-Tien;Higuchi, Toshiro;Fung, Rong-Fong; 馮榮豐 |
| 國立高雄第一科技大學 |
2003.01 |
A novel precision positioning table utilizing impact force of spring-mounted piezoelectric actuator—part II: theoretical analysis
|
Liu, Yung-Tien;Higuchi, Toshiro;Fung, Rong-Fong; 劉永田;馮榮豐 |
| 國立高雄第一科技大學 |
2002.10 |
Vibration Control of the Rotating Flexible-Shaft/Multi-Flexible-Disk System With the Eddy-Current Damper
|
Fung, Rong-Fong;Hsu, Shih-Ming;Sun, Jung-Hung; 孫榮宏 |
