| 南華大學 |
2018 |
服務品質、期望落差、滿意度與忠誠度關係之研究－以琉球鄉民宿為例
|
黃正宏; HUANG, CHENG-HUNG |
| 國立成功大學 |
2016-11 |
An inverse study to design the optimal shape and position for delta winglet vortex generators of pin-fin heat sinks
|
Huang, Cheng-Hung; Chiang, Po-Ching |
| 國立成功大學 |
2016-06-25 |
A nonlinear fin design problem in determining the optimum shapes of fully wet annular fins
|
Huang, Cheng-Hung;Chung, Yun-Lung |
| 國立成功大學 |
2016-06 |
An optimal volute spiral case design for centrifugal fan: theoretical and experimental studies
|
Huang, Cheng-Hung; Tseng, Wei-Cheng |
| 國立成功大學 |
2016-04 |
A manifold design problem for a plate-fin microdevice to maximize the flow uniformity of system
|
Huang, Cheng-Hung; Wang, Chun-Hsien; Kim, Sin |
| 國立成功大學 |
2016-01 |
Determination of relative positions and phase angle of dual piezoelectric fans for maximum heat dissipation of fin surface
|
Huang, Cheng-Hung; Fan, Guang-Yi |
| 國立成功大學 |
2015-11 |
An inverse problem in determining the optimum shapes for partially wet annular fins based on efficiency maximization
|
Huang, Cheng-Hung; Chung, Yun-Lung |
| 國立成功大學 |
2015-06 |
A three-dimensional shape design problem to determine the filler geometry for optimal system thermal conductivity
|
Huang, Cheng-Hung; Hsu, Hsueh-Min |
| 國立成功大學 |
2015-05 |
The design of optimum perforation diameters for pin fin array for heat transfer enhancement
|
Huang, Cheng-Hung; Liu, Yu-Chen; Ay, Herchang |
| 國立成功大學 |
2015-05 |
Effects of Deposition Conditions of TiO2 Film and Substrate Prestrain on Film Void Geometries and Optical Properties in TiO2/PET Specimens
|
Li, Tse-Chang; Han, Chang-Fu; Chung, Chung-Jen; Huang, Cheng-Hung; Lin, Jen-Fin |
| 國立成功大學 |
2015-04-15 |
An inverse problem in estimating simultaneously the non-linear reaction rates for a fixed-bed reactor
|
Huang, Cheng-Hung; Li, Bo-Yi |
| 國立成功大學 |
2015-02 |
An inverse problem to estimate simultaneously six internal heat fluxes for a square combustion chamber
|
Huang, Cheng-Hung; Lee, Chien-Tsuen |
| 國立成功大學 |
2015-01 |
An inverse problem in determining the optimal filler shape of composite materials for maximum effective thermal conductivity
|
Huang, Cheng-Hung; Hsu, Hsueh-Min |
| 國立高雄應用科技大學 |
2015 |
以Schatz 6R與Bennett 4R 機構混合的運動特性
|
黃正宏; Huang, Cheng-Hung |
| 國立成功大學 |
2014-06 |
An impingement heat sink module design problem in determining simultaneously the optimal non-uniform fin widths and heights
|
Huang, Cheng-Hung; Chen, Yu-Hsiang |
| 國立成功大學 |
2014-04-03 |
A Non-linear Inverse Problem in Estimating the Reaction Rate Function for an Annular-Bed Reactor
|
Huang, Cheng-Hung; Li, Bo-Yi |
| 國立成功大學 |
2014-04 |
Inverse Method in Estimating the Base Heat Flux for Irregular Fins
|
Huang, Cheng-Hung; Lee, Chien-Tsuen |
| 國立成功大學 |
2014-02-22 |
An optimal design problem in determining non-uniform fin heights and widths for an impingement heat sink module
|
Huang, Cheng-Hung; Chen, Yu-Hsiang |
| 國立成功大學 |
2014 |
AN INVERSE DESIGN PROBLEM OF ESTIMATING THE OPTIMAL SHAPE OF ANNULAR FINS ADHERED TO A BARE TUBE OF AN EVAPORATOR
|
Huang, Cheng-Hung; Chung, Yun-Lung |
| 國立成功大學 |
2013-12 |
An impingement heat sink module design problem in determining optimal non-uniform fin widths
|
Huang, Cheng-Hung; Chen, Yu-Hsiang; Li, Hung-Yi |
| 國立成功大學 |
2013-08 |
The study on the improvement of system uniformity flow rate for U-type compact heat exchangers
|
Huang, Cheng-Hung; Wang, Chun-Hsien |
| 國立成功大學 |
2013-03 |
An optimal design algorithm for centrifugal fans: Theoretical and experimental studies
|
Huang, Cheng-Hung; Hung, Min-Hsiang |
| 國立成功大學 |
2013-02-01 |
An inverse problem in determining the acid and salt diffusivities simultaneously for polymer solution in a wet spinning process
|
Huang, Cheng-Hung; Lee, Ming-Yuan; Kim, Sin |
| 國立成功大學 |
2013-02-01 |
The design of uniform tube flow rates for Z-type compact parallel flow heat exchangers
|
Huang, Cheng-Hung; Wang, Chun-Hsien |
| 國立成功大學 |
2012-09 |
An inverse problem in determining the optimal position for piezoelectric fan with experimental verification
|
Huang, Cheng-Hung; Chen, Yung-Fong; Ay, Herchang |
| 國立成功大學 |
2012-07 |
An inverse design method for optimizing design parameters of heat sink modules with encapsulated chip
|
Huang, Cheng-Hung |
| 國立成功大學 |
2012-02 |
An optimal design for axial-flow fan blade: theoretical and experimental studies
|
Huang, Cheng-Hung; Gau, Chung-Wei |
| 國立成功大學 |
2012-01-25 |
Estimation of time-dependent reaction coefficient with extended Kalman filter approach
|
Kim, Sin; Kim, Kyung-Youn; Huang, Cheng-Hung |
| 國立成功大學 |
2012-01-15 |
An inverse problem in estimating the reaction functions and solute concentration simultaneously in a reversible process
|
Huang, Cheng-Hung; Lee, Ming-Yuan |
| 國立高雄應用科技大學 |
2012 |
An inverse problem in determining the optimal position for piezoelectric fan with experimental verification
|
Huang, Cheng-Hung; Chen, Yung-Fong; Ay, Herchang |
| 國立成功大學 |
2011-11 |
An optimal control problem in estimating the cooling condition for a cemented hip replacement system
|
Huang, Cheng-Hung; Wu, Pei-Ying |
| 國立成功大學 |
2011-07 |
Optimum Shape Design for Three-Layer Interfacial Surfaces
|
Huang, Cheng-Hung; Wuchiu, Cheng-Tso |
| 國立成功大學 |
2011-03-03 |
2011 UK - Taiwan Education Exchange Day
|
Huang, Cheng Hung; Taiwan universities; UK universities |
| 國立成功大學 |
2011-01 |
Thermal Tomography Problem in Estimating the Unknown Interfacial Surface
|
Huang, Cheng-Hung; Liu, Chia-Ying |
| 國立高雄應用科技大學 |
2011 |
A three-dimensional heat sink module design problem with experimental verification
|
Huang, Cheng-Hung; Lu, Jon-Jer; Ay, Herchang |
| 南華大學 |
2010 |
社工專業化對福利服務的影響─以嘉義身心障礙非營利團體為例
|
黃政閎; Huang, Cheng-hung |
| 國立成功大學 |
2009-10 |
An experimental study in determining the local heat transfer coefficients for the plate finned-tube heat exchangers
|
Huang, Cheng-Hung; Yuan, I-Cha; Ay, Herchang |
| 國立成功大學 |
2009-06 |
An inverse vibration problem in estimating the spatial and temporal-dependent external forces for cutting tools
|
Huang, Cheng-Hung; Shih, Chili-Chun; Kim, Sin |
| 國立成功大學 |
2009-04 |
An Optimal Fin Design Problem in Estimating the Shapes of Longitudinal and Spine Fully Wet Fins
|
Huang, Cheng-Hung; Chung, Yun-Lung |
| 國立成功大學 |
2009-03 |
A three-dimensional inverse geometry problem in estimating the space and time-dependent shape of an irregular internal cavity
|
Huang, Cheng-Hung; Chen, Chi-An |
| 國立成功大學 |
2009-03 |
A three-dimensional inverse geometry problem in identifying irregular boundary configurations
|
Huang, Cheng-Hung; Chaing, Meng-Ting |
| 國立成功大學 |
2009-02-01 |
An inverse geometry design problem in optimizing the shape of the gas channel for a proton exchange membrane fuel cell
|
Huang, Cheng-Hung; Chen, Liang-Yu; Kim, Sin |
| 國立成功大學 |
2009 |
Optimal Gas Channel Shape Design for a Serpentine PEMFC: Theoretical and Experimental Studies
|
Huang, Cheng-Hung; Lin, Jhong-Wun |
| 國立成功大學 |
2008-10-01 |
An iterative regularization method in estimating the unknown energy source by laser pulses with a dual-phase-lag model
|
Huang, Cheng-Hung; Lin, Chien-Yu |
| 國立成功大學 |
2008-10 |
A transient three-dimensional inverse geometry problem in estimating the space and time-dependent irregular boundary shapes
|
Huang, Cheng-Hung; Chaing, Meng-Ting |
| 國立成功大學 |
2008-10 |
The Shape Identification Problem in Estimating the Geometry of A Three-Dimensional Irregular Internal Cavity
|
Huang, Cheng-Hung; Chen, Chi-An |
| 國立成功大學 |
2008-10 |
Inverse Hyperbolic Conduction Problem in Estimating Two Unknown Surface Heat Fluxes Simultaneously
|
Huang, Cheng-Hung; Lin, Chien-Yu |
| 國立成功大學 |
2008-06 |
Effects of growth hormone treatment on height, weight, and obesity in Taiwanese patients with Prader-Willi syndrome
|
Lin, Hsiang-Yu; Lin, Shuan-Pei; Tsai, Li-Ping; Chao, Mei-Chyn; Chen, Ming-Ren; Chuang, Chih-Kuang; Huang, Chi-Yu; Tsai, Fuu-Jen; Chou, I-Ching; Chiu, Pao-Ching; Huang, Cheng-Hung; Yen, Jui-Lung; Lin, Ju-Li; Kuo, Pao-Lin |
| 國立成功大學 |
2008-04 |
An inverse problem in estimating the strength of contaminant source for groundwater systems
|
Huang, Cheng-Hung; Li, Jia-Xun; Kim, Sin |
| 國立成功大學 |
2008-01-01 |
An inverse problem in estimating the relaxation time for nanoscale phonon radiative transfer problem
|
Huang, Cheng-Hung; Chen, Kuan-Yu; Kim, Sin |
