| 國立臺灣大學 |
2003 |
Assessmentof controller performance: a relay feedback approach
|
Thyagarajan, T.; Yu, Cheng-Ching; Huang, Hsiao-Ping |
| 國立臺灣大學 |
2003 |
Design of a complete ethyl acetate reactive distillation column system
|
Tang, Yeong Tarng; Huang, Hsiao-Ping; Chien, I-Lung |
| 國立臺灣大學 |
2003 |
Monitoring and fault detection for dynamic systems using dynamic PCA on filtered data
|
Huang, Hsiao-Ping; Wu, Ming-Chyi |
| 國立臺灣大學 |
2003 |
The optimal profit distribution problem for a supply chain network
|
Chen, Cheng-Liang; Wang, Bin-Wei; Lee, Wen-Cheng; Huang, Hsiao-Ping |
| 臺大學術典藏 |
2003 |
Design of a complete ethyl acetate reactive distillation column system
|
Chien, I-Lung; Huang, Hsiao-Ping; Tang, Yeong Tarng; Tang, Yeong Tarng; Huang, Hsiao-Ping; Chien, I-Lung |
| 臺大學術典藏 |
2003 |
The optimal profit distribution problem for a supply chain network
|
Lee, Wen-Cheng; Huang, Hsiao-Ping; Wang, Bin-Wei; Chen, Cheng-Liang; Chen, Cheng-Liang; Wang, Bin-Wei; Lee, Wen-Cheng; Huang, Hsiao-Ping |
| 國立臺灣大學 |
2002 |
Monitoring and Assessment of Control Performance for Single Loop Systems
|
Huang, Hsiao-Ping; Jeng, Jyh-Cheng |
| 國立臺灣大學 |
2001-12 |
Dynamic loop interactions and multi-loop PID controller design
|
Huang, Hsiao-Ping; Jeng, Jyh-Cheng; Chiang, Chih-Hung |
| 國立臺灣大學 |
2001 |
A System of Procedures for Identification of Simple Models Using Transient Step Response
|
Huang, Hsiao-Ping; Lee, Ming-Wei; Chen, Cheng-Liang |
| 國立高雄第一科技大學 |
1999.01 |
Auto-Tuning of PID Controllers for Second Order Unstable Process Having Dead Time
|
Huang, Hsiao-Ping;Chen, Chan-Cheng |
| 國立臺灣大學 |
1999 |
A Simple Multiloop Tuning Method for PID Controllers with No Proportional Kick
|
Chien, I-Lung; Huang, Hsiao-Ping; Yang, Jen-Chien |
| 臺大學術典藏 |
1999 |
A Simple Multiloop Tuning Method for PID Controllers with No Proportional Kick
|
Chien, I-Lung; Huang, Hsiao-Ping; Yang, Jen-Chien; Chien, I-Lung; Huang, Hsiao-Ping; Yang, Jen-Chien |
| 國立高雄第一科技大學 |
1997 |
A new approach to identify low order model for process having single unstable pole
|
Huang, Hsiao-Ping;Chen, Chan-Cheng |
| 國立臺灣大學 |
1997 |
A sliding observer for nonlinear process control
|
Wang, Gow-Bin; Peng, Sheng-Shiou; Huang, Hsiao-Ping |
| 國立臺灣大學 |
1997 |
批式程序之系統工程研究
|
黃孝平; Huang, Hsiao-Ping |
| 國立臺灣大學 |
1996 |
以滑動型態觀測器作批式反應器之模式預測控制
|
黃孝平; Huang, Hsiao-Ping |
| 國立臺灣大學 |
1994 |
Robotic Deburring with a Hybrid-Compliance End-Effector
|
呂秀雄; Shih, C. A.; 黃孝平; Lu, Shui-Shong; Shih, C. A.; Huang, Hsiao-Ping |
| 國立臺灣大學 |
1992-08 |
Modularization and Properties of Flexible Manufacturing Systems
|
呂秀雄; 黃漢邦; 黃孝平; Lu, Shui-Shong; Huang, Han-Pang; Huang, Hsiao-Ping |
| 臺大學術典藏 |
1992-08 |
Modularization and Properties of Flexible Manufacturing Systems
|
Huang, Hsiao-Ping; Lu, Shui-Shong; Huang, Han-Pang; Huang, Hsiao-Ping; Lu, Shui-Shong; Huang, Han-Pang |
| 國立臺灣大學 |
1992 |
非線性多變數輸出回饋控制系統之預測性控制
|
黃孝平; Huang, Hsiao-Ping |
| 國立臺灣大學 |
1992 |
Burr Detection by Using Vision Image
|
呂秀雄; Lee, K. C.; 黃孝平; Lu, Shui-Shong; Lee, K. C.; Huang, Hsiao-Ping |
| 國立臺灣大學 |
1992 |
Distributed and Modularized Control of Flexible Manufacturing Systems
|
呂秀雄; 黃孝平; Lu, Shui-Shong; Huang, Hsiao-Ping |
| 臺大學術典藏 |
1992 |
Burr Detection by Using Vision Image
|
呂秀雄;Lee, K. C.;黃孝平; Lu, Shui-Shong;Lee, K. C.;Huang, Hsiao-Ping; 呂秀雄; Lee, K. C.; 黃孝平; Lu, Shui-Shong; Lee, K. C.; Huang, Hsiao-Ping |
| 國立臺灣大學 |
1991 |
部分回饋多變數系統之設定點自我適應調整及控制
|
黃孝平; Huang, Hsiao-Ping |
| 國立臺灣大學 |
1991 |
複合模式識別之應用與解析-對高階及複雜程序之動態模式識別
|
黃孝平; Huang, Hsiao-Ping |
| 國立臺灣大學 |
1991 |
A Flexible Robot Inspection Cell Based on Vision Image
|
呂秀雄; Lee, K. C.; 黃孝平; Lu, Shui-Shong; Lee, K. C.; Huang, Hsiao-Ping |
| 國立臺灣大學 |
1991 |
Estimation of Modelling Errors of a Closed-Loop System and Application to Identification
|
黃孝平; Chen, Chi-Liang; 趙榮澄; Huang, Hsiao-Ping; Chen, Chi-Liang; Chao, Yung-Cheng |
| 國立臺灣大學 |
1990 |
A Modified Smith Predictor Control System for Multivariable Systems Having Time Delays
|
黃孝平; 林佩蓉; 趙榮澄; Huang, Hsiao-Ping; 林佩蓉; Chao, Yung-Cheng |
| 國立臺灣大學 |
1990 |
A Modified Smith Predictor with an Approximate Inverse of Dead Time
|
黃孝平; Chen, Chi-Liang; 趙榮澄; Chen, P. L.; Huang, Hsiao-Ping; Chen, Chi-Liang; Chao, Yung-Cheng; Chen, P. L. |
| 國立臺灣大學 |
1990 |
An Expert Sustem for Efficient Operation of a Blast Furnace
|
Chen, Chi-Liang; 趙榮澄; 黃孝平; Jen, J. J.; Fang, M. D.; Chen, Chi-Liang; Chao, Yung-Cheng; Huang, Hsiao-Ping; Jen, J. J.; Fang, M. D. |
| 國立臺灣大學 |
1990 |
ESEMAP:An Expert System for Emergency Management of Air Pollution
|
梁文傑; 黃孝平; Wang, J. C.; Liang, Wen-Jey; Huang, Hsiao-Ping; Wang, J. C. |
| 國立臺灣大學 |
1990 |
Parameter Estimation of the Commercial-Scale RDS Reactor System
|
趙榮澄; 廖宏章; 黃孝平; Chao, Yung-Cheng; 廖宏章; Huang, Hsiao-Ping |
| 國立臺灣大學 |
1990 |
程序識別及高等控制軟體IDACS初探
|
蘇春華; 金光海; 蔡永銘; 陳誠亮; 趙榮澄; 黃孝平; 蘇春華; 金光海; 蔡永銘; 陳誠亮; 趙榮澄; Huang, Hsiao-Ping |
| 國立臺灣大學 |
1990 |
Set-Poing Optimization of an Adiabatic Trickle-Bed Reactor System
|
趙榮澄; Chang, J. S.; 黃孝平; Chao, Yung-Cheng; Chang, J. S.; Huang, Hsiao-Ping |
| 國立臺灣大學 |
1989 |
Discrete-Time Adaptive Predictive Control System by 2-Port Design
|
黃孝平; Lin, H. S.; 趙榮澄; Huang, Hsiao-Ping; Lin, H. S.; Chao, Yung-Cheng |
| 國立臺灣大學 |
1989 |
Identification of MIMO Continuous Time Models by Indircet Methods
|
黃孝平; Chen, Chi-Liang; 趙榮澄; Huang, Hsiao-Ping; Chen, Chi-Liang; Chao, Yung-Cheng |
| 國立臺灣大學 |
1989 |
Simulation, Identification and Set-Point Optimication of Commercial Scale Residue Hydrodesulfurization Reactor
|
黃孝平; Chen, Chi-Liang; 趙榮澄; Huang, Hsiao-Ping; Chen, Chi-Liang; Chao, Yung-Cheng |
| 國立臺灣大學 |
1989 |
Transfer Function Matrix Idenfification of Multiple Input/Multiple Output (MIMO) Dynamic System
|
Chen, Chi-Liang; 黃孝平; 趙榮澄; Chen, Chi-Liang; Huang, Hsiao-Ping; Chao, Yung-Cheng |
| 國立臺灣大學 |
1988 |
Augmented Hybrid Method for Continuous Process Identification from Sampled Data with Coloured Noise
|
黃孝平; Chen, Chi-Liang; 趙榮澄; Huang, Hsiao-Ping; Chen, Chi-Liang; Chao, Yung-Cheng |
| 國立臺灣大學 |
1988 |
Simulation, Identification and Set-Point Optimization of Residual Hydrodesulfurization Reactor
|
趙榮澄; 黃孝平; 楊武龍; 張雍政; 廖宏章; Chao, Yung-Cheng; Huang, Hsiao-Ping; 楊武龍; 張雍政; 廖宏章 |
| 國立臺灣大學 |
1988 |
The Expert System for Efficient Operation of Blast Furnace
|
趙榮澄; 陳誠亮; 黃孝平; 鄭景瑞; 方明達; 趙榮澄; 陳誠亮; Huang, Hsiao-Ping; 鄭景瑞; 方明達 |
| 國立臺灣大學 |
1988 |
On-Line Optimal Feed of Substrate During Fed-Batch Culture of Cell Mass
|
黃孝平; Chen, Chi-Liang; 黃世佑; Huang, S. Y.; Huang, Hsiao-Ping; Chen, Chi-Liang; Huang, Shih-Yow; Huang, S. Y. |
| 國立臺灣大學 |
1988 |
Implementation of a Robot-Served DNC System
|
呂秀雄; 黃孝平; Lu, Shui-Shong; Huang, Hsiao-Ping |
| 國立臺灣大學 |
1987 |
Combined Sytem Parameter Estimation and Deactivation Model Identification of an Adiabatic Trickle Bed Reactor from Operating Reactor Data
|
趙榮澄; 張志雄; 黃孝平; Chao, Yung-Cheng; 張志雄; Huang, Hsiao-Ping |
| 國立臺灣大學 |
1987 |
Adaptive Decoupling Control by Predictive Compensation for Unmeasurable Load
|
趙榮澄; 黃孝平; Chao, Yung-Cheng; Huang, Hsiao-Ping |
| 國立臺灣大學 |
1987 |
An Algebraic Approach for Recursive Parameter Estimation of Continuous-Time Linear Dynamic Models From Sampled Data
|
黃孝平; 趙榮澄; Jang, S. S; Huang, Hsiao-Ping; Chao, Yung-Cheng; Jang, S. S |
| 國立臺灣大學 |
1987 |
Estimation of Catalyst Activity Profiles on the Adiabatic Trickle Bed Reactor
|
趙榮澄; Chang, J. S.; 黃孝平; Chao, Yung-Cheng; Chang, J. S.; Huang, Hsiao-Ping |
| 國立臺灣大學 |
1987 |
Experimental Study of a Predictive Control System Design by 2-Part Approach
|
趙榮澄; 林顯聖; 黃孝平; Chao, Yung-Cheng; 林顯聖; Huang, Hsiao-Ping |
| 國立臺灣大學 |
1987 |
Computer Control of the Thermal Level of a Blast Furnace
|
趙榮澄; 黃孝平; Su, C. H.; Chao, Yung-Cheng; Huang, Hsiao-Ping; Su, C. H. |
| 國立臺灣大學 |
1987 |
Estimation of Continuous-Time MIMO Linear Dynamic Models from Sampled Data by Hybrid Parametrization
|
黃孝平; Chen, Chi-Liang; 趙榮澄; Huang, Hsiao-Ping; Chen, Chi-Liang; Chao, Yung-Cheng |
