| 國立成功大學 |
2003-08 |
The influence of oxidation on crack resistance in injection moulded Cr3C2/Al2O3 composites
|
Jeng, Ching-An; Huang, Jow-Lay |
| 國立成功大學 |
2003-07-22 |
Effect of thickness on the structural and optical properties of ZnO films by r.f. magnetron sputtering
|
Lin, Su-Shia; Huang, Jow-Lay |
| 國立成功大學 |
2003-07-22 |
The properties of heavily Al-doped ZnO films before and after annealing in the different atmosphere
|
Lin, Su-Shia; Huang, Jow-Lay; Sajgalik, P. |
| 國立成功大學 |
2003-07 |
Electron emission from nanotips of amorphous diamond
|
Kan, M. C.; Huang, Jow-Lay; Sung, J. C.; Lii, D. F. |
| 國立成功大學 |
2003-07 |
Enhanced field emission from nitrogen-doped amorphous diamond
|
Kan, Ming-Chi; Huang, Jow-Lay; Sung, James C.; Chen, Kuei-Hsien; Lii, Ding-Fwu |
| 國立成功大學 |
2003-06-22 |
Annealing effects on properties of antimony tin oxide thin films deposited by RF reactive magnetron sputtering
|
Huang, Jow-Lay; Pan, Yi; Chang, Jia-Yuan; Yau, Bao-Shun |
| 國立成功大學 |
2003-05 |
Wet erosion damage of Cr3C2/Al2O3 composite
|
Jeng, Ching-An; Huang, Jow-Lay |
| 國立成功大學 |
2003-04 |
Improved crystallinity and optical properties of AlOx thin films by a ZnO interlayer
|
Lin, Su-Shia; Huang, Jow-Lay |
| 國立成功大學 |
2003-03-01 |
Preparation of beta-TCP with high thermal stability by solid reaction route
|
Pan, Y.; Huang, Jow-Lay; Shao, C. Y. |
| 國立成功大學 |
2003-02-03 |
Erosion damage and surface residual stress of Cr3C2/Al2O3 composite
|
Jeng, Ching-An; Huang, Jow-Lay; Lee, Show-Yueh; Hwang, Bing-Hwait |
| 國立成功大學 |
2003-01-15 |
Effects of nitrogen flow on RF reactive magnetron sputtered silicon nitride films on high speed steel
|
Yau, Bao-Shun; Huang, Jow-Lay |
| 國立成功大學 |
2003 |
Thermionic emission of amorphous diamond and field emission of carbon nanotubes
|
Kan, Ming-Chi; Huang, Jow-Lay; Sung, James C.; Chen, Kuei-Hsien; Yau, Bao-Shun |
| 國立成功大學 |
2003 |
Optical properties of ITO/AlOx thin films prepared by reactive d.c. magnetron sputtering
|
Lin, Su-Shia; Huang, Jow-Lay |
| 國立成功大學 |
2003 |
Effect of the electrical discharge machining on strength and reliability of TiN/Si3N4 composites
|
Liu, Chien-Cheng; Huang, Jow-Lay |
| 國立成功大學 |
2003 |
Sliding wear and fracture mechanisms of injection molded Cr3C2/Al2O3 composite
|
Jeng, Ching-An; Huang, Jow-Lay; Lin, Jen-Fin |
| 國立成功大學 |
2003 |
Investigation of ceramic-matrix nanocomposites via metal organic chemical vapor deposition
|
Huang, Jow-Lay; Huang, W. S.; Lin, H. D.; Peng, K. T.; Lii, D. F. |
| 國立成功大學 |
2002-11 |
Evaluation of low-temperature processing of lead zirconate titanate (53/47) ceramics derived from 1-propanol-based sol-gel stock solutions
|
Wu, Long; Chen, Bing-Huei; Chang, Ten-Yi; Huang, Jow-Lay; Huag, Cheng-Liang |
| 國立成功大學 |
2002-09 |
Microstructure of silicon nitride containing beta-phase seeds: II
|
Lu, Horng-Hwa; Huang, Jow-Lay |
| 國立成功大學 |
2002-05 |
Fatigue and R-curve behavior of an Al2O3-10vol%Cr3C2 composite
|
Jeng, Ching-An; Huang, Jow-Lay; Wang, Shi-Min; Chen, Ching-Yun |
| 國立成功大學 |
2002-02-28 |
Structural and CO sensing characteristics of Ti-added SnO2 thin films
|
Chen, Jen-Sue; Li, H. L.; Huang, Jow-Lay |
| 國立成功大學 |
2002-02-15 |
Formation of BN films on carbon fibers by dip-coating
|
Lii, Ding-Fwu; Huang, Jow-Lay; Tsui, Li-Jen; Lee, Shaw-Min |
| 國立成功大學 |
2002-02 |
The mechanical properties of AlN/Al composites manufactured by squeeze casting
|
Lii, Ding-Fwu; Huang, Jow-Lay; Chang, Shao-Ting |
| 國立成功大學 |
2002-01-15 |
The effects of ytterbium oxide on the microstructure and R-curve behaviors of silicon nitride
|
Lo, Wen-Tse; Huang, Jow-Lay; Shih, Zan-Hon; Lii, Ding-Fwu; Li, Chun-Te |
| 國立成功大學 |
2002-01 |
Gas sensitivity of reactively sputtered SnO2 films
|
Chen, Jen-Sue; Lo, Wen-Tse; Huang, Jow-Lay |
| 國立成功大學 |
2002 |
An uneven strain model for analysis of residual stress and interface stress in laminate composites
|
Bao, Yiwang; Su, Shengbiao; Huang, Jow-Lay |
