| 國立成功大學 |
2003 |
Investigation of ceramic-matrix nanocomposites via metal organic chemical vapor deposition
|
Huang, Jow-Lay; Huang, W. S.; Lin, H. D.; Peng, K. T.; Lii, D. F. |
| 國立成功大學 |
2002-11 |
Evaluation of low-temperature processing of lead zirconate titanate (53/47) ceramics derived from 1-propanol-based sol-gel stock solutions
|
Wu, Long; Chen, Bing-Huei; Chang, Ten-Yi; Huang, Jow-Lay; Huag, Cheng-Liang |
| 國立成功大學 |
2002-09 |
Microstructure of silicon nitride containing beta-phase seeds: II
|
Lu, Horng-Hwa; Huang, Jow-Lay |
| 國立成功大學 |
2002-05 |
Fatigue and R-curve behavior of an Al2O3-10vol%Cr3C2 composite
|
Jeng, Ching-An; Huang, Jow-Lay; Wang, Shi-Min; Chen, Ching-Yun |
| 國立成功大學 |
2002-02-28 |
Structural and CO sensing characteristics of Ti-added SnO2 thin films
|
Chen, Jen-Sue; Li, H. L.; Huang, Jow-Lay |
| 國立成功大學 |
2002-02-15 |
Formation of BN films on carbon fibers by dip-coating
|
Lii, Ding-Fwu; Huang, Jow-Lay; Tsui, Li-Jen; Lee, Shaw-Min |
| 國立成功大學 |
2002-02 |
The mechanical properties of AlN/Al composites manufactured by squeeze casting
|
Lii, Ding-Fwu; Huang, Jow-Lay; Chang, Shao-Ting |
| 國立成功大學 |
2002-01-15 |
The effects of ytterbium oxide on the microstructure and R-curve behaviors of silicon nitride
|
Lo, Wen-Tse; Huang, Jow-Lay; Shih, Zan-Hon; Lii, Ding-Fwu; Li, Chun-Te |
| 國立成功大學 |
2002-01 |
Gas sensitivity of reactively sputtered SnO2 films
|
Chen, Jen-Sue; Lo, Wen-Tse; Huang, Jow-Lay |
| 國立成功大學 |
2002 |
An uneven strain model for analysis of residual stress and interface stress in laminate composites
|
Bao, Yiwang; Su, Shengbiao; Huang, Jow-Lay |
| 國立成功大學 |
2002 |
The mechanical property of squeeze casting AlN/Al composite
|
Lii, Ding-Fwu; Huang, Jow-Lay; Chang, Shao-Ting |
| 國立成功大學 |
2002 |
Reactive magnetron sputtering of indium tin oxide on acrylics
|
Huang, Jow-Lay; Jah, Yin-Tsan; Chen, Ching-Yun; Yau, Bao-Shun |
| 國立成功大學 |
2001-08 |
Microstructure in silicon nitride containing beta-phase seeding: III, grain growth and coalescence
|
Lu, Horng-Hwa; Huang, Jow-Lay |
| 國立成功大學 |
2001-01 |
Internal stress and adhesive strength of reactive magnetron sputtered indium tin oxide films on acrylics
|
Lii, Ding-Fwu; Yau, Bao-Shun; Huang, Jow-Lay; Chen, Ching-Yun; Lo, Wen-Tse |
| 國立成功大學 |
2001 |
The electromagnetic shielding effectiveness of indium tin oxide films
|
Huang, Jow-Lay; Yau, Bao-Shun; Chen, Ching-Yun; Lo, Wen-Tse; Lii, Ding-Fwu |
| 國立成功大學 |
2001 |
Effect Of Y2O3 and Yb2O3 on the microstructure and mechanical properties of silicon nitride
|
Lu, Horng-Hwa; Huang, Jow-Lay |
| 國立成功大學 |
2001 |
Investigation of Ti1-xAlxN films as diffusion barrier between Cu and Si
|
Lii, Ding-Fwu; Huang, Jow-Lay; Tsai, WK; Lo, Wen-Tse; Yau, Bao-Shun |
| 國立成功大學 |
2000-08 |
Reactive magnetron sputtering of indium tin oxide films on acrylics - Electrical resistivity and optical properties
|
Huang, Jow-Lay; Jah, Yin-Tsan; Chen, Ching-Yun; Yau, Bao-Shun; Lin, Su-Shia |
| 國立成功大學 |
2000-07-17 |
Reactive magnetron sputtering of indium tin oxide films on acrylics morphology and bonding state
|
Huang, Jow-Lay; Jah, Yin-Tsan; Yau, Bao-Shun; Chen, Ching-Yun; Lu, Horng-Hwa |
| 國立成功大學 |
2000-02-29 |
Crack growth resistance of Cr3C2/Al2O3 composites
|
Huang, Jow-Lay; Lin, Ho-Don; Jeng, Ching-An; Lii, Ding-Fwu |
| 國立成功大學 |
2000-02-28 |
The effects of post heat-treatment on the microstructure and fracture behaviors of Yb2O3-doped Si3N4
|
Huang, Jow-Lay; Shih, Zan-Hon; Lu, Horng-Hwa; Chen, Ching-Yun |
| 國立成功大學 |
2000-01 |
Investigation of reactive magnetron sputtering of indium tin oxide films on acrylics - Lattice parameters and stoichiometric compositions
|
Huang, Jow-Lay; Jah, Yin-Tsan; Yau, Bao-Shun; Lo, Wen-Tse |
| 國立成功大學 |
2000 |
Micro-electrode discharge machining of TiN/Si3N4 composites
|
Liu, Chien-Chen; Huang, Jow-Lay |
| 國立成功大學 |
1999-03 |
Effects of aluminum concentration on the oxidation behaviors of reactively sputtered TiAlN films
|
Huang, Jow-Lay; Shew, Bor-Yuan |
| 國立成功大學 |
1999 |
The facing challenges of silicon nitride
|
Huang, Jow-Lay; Lu, Horng-Hwa; Liu, Chien-Chen |
