| 國立臺灣科技大學 |
2008 |
Influence of ZnO buffer layer on AZO film properties by radio frequency magnetron sputtering
|
Hsu, C.Y.;Ko, T.F.;Huang, Y.M. |
| 國立臺灣科技大學 |
2008 |
Analysis of forming limits in metal forming processes
|
Huang, Y.-M.;Tsai, Y.-W.;Li, C.-L. |
| 國立臺灣科技大學 |
2008 |
The analysis of forming limit in re-penetration process of the hole-flanging of sheet metal
|
Li, C.-L.;Huang, Y.-M.;Tsai, Y.-W. |
| 國立彰化師範大學 |
2008 |
Exploring the Mediating Process Linking Applicant Personality and Hiring Recommendations
|
Chen, C. C.; Huang, T. C.; Huang, Y. M.; Liu, I. C. |
| 國立臺灣科技大學 |
2007 |
Development of stereolithography simulation process based on the dynamic finite element method
|
Huang Y.-M.; Jiang C.-P. |
| 國立臺灣科技大學 |
2007 |
An elasto-plastic finite element simulation of the UO-tube processes of sheet metal
|
Chen T.-C.; Huang Y.-M. |
| 國立臺灣科技大學 |
2007 |
Numerical analysis for bifurcation fracture of sheet metal forming
|
Huang, Y.-M.;Kuriyama, S. |
| 國立勤益科技大學 |
2006-12 |
Glycosyl bis-porphyrin conjugates: Synthesis and potential application in PDT
|
V. Sol ; V. Chaleix ; Y. Champavier ; R. Granet ;Huang, Y.-M.; P. Krausz |
| 淡江大學 |
2006-01 |
A Study of Optimum Blank in the Deep Drawing Process of Square Cup with Flange by Using Adaptive Network Fuzzy Inference System
|
Li, C. -L.; Huang, Y. -M.; Tsai, Y. -W. |
| 國立東華大學 |
2006 |
Surface roughness of sputtered ZnO films
|
Lin,Y. S.; Hsu,K. C.; Huang,Y. M. |
| 國立臺灣科技大學 |
2006 |
The development and application of the slope management system
|
Lee W.F.; Liao H.J.; Chen R.H.; Wei C.Y.; Huang Y.M. |
| 國立臺灣科技大學 |
2006 |
A study of optimum blank in the deep drawing process of square cup with flange by using adaptive network fuzzy inference system
|
Li C.-L.; Huang Y.-M.; Tsai Y.-W. |
| 國立臺灣科技大學 |
2006 |
An elasto-plastic finite element analysis of the hat-type drawing process of sheet metal
|
Chen T.-C.; Huang Y.-M. |
| 國立臺灣科技大學 |
2006 |
Path planning effect for the accuracy of rapid prototyping system
|
Huang, Y.-M.;Lan, H.-Y. |
| 國立臺灣科技大學 |
2006 |
Compensation of distortion in the bottom exposure of stereolithography process
|
Huang, Y.-M.;Lan, H.-Y. |
| 國立臺灣海洋大學 |
2006 |
Seismic Performance Modeling of Geosynthetic Reinforced Slopes
|
ALee, W.F;Chen, J.W;Lin, S.S;Huang, Y.M |
| 國立東華大學 |
2005-08 |
Study of surface roughness of sputtered ZnO films
|
Lin,Y. S.; Hsu, K. C.; Huang,Y. M. |
| 國立彰化師範大學 |
2005-07 |
A Simple Preparation Procedure for the Synthesis of Sodium Hexaniobate Nanorods
|
Lin, C. H. ; Lee, C. H. ; Chao, J. H. ; Huang, Y. M. ; Chang, H. W. ; Kuo, C. Y. ; Hsu, C. W. |
| 國立成功大學 |
2005-02-17 |
Password-only authenticated key establishment protocol without public key cryptography
|
Laih, Chi-Sung; Ding, L.; Huang, Y. M. |
| 臺大學術典藏 |
2005 |
Antioxidant activities of Physalis peruviana
|
Wu, S.-J.; Ng, L.-T.; Huang, Y.-M.; Lin, D.-L.; Wang, S.-S.; Huang, S.-N.; Lin, C.-C.; Wu, S.-J.; Ng, L.-T.; Huang, Y.-M.; Lin, D.-L.; Wang, S.-S.; Huang, S.-N.; Lin, C.-C.; LEAN-TEIK HUANG |
| 國立彰化師範大學 |
2004-10 |
Photocatalytic Generation of H2 Gas from Neat Ethanol over Pt/TiO2 Nanotube Catalysts
|
Lin, Chiu-Hsun; Lee, C. H. ; Chao, J. H. ; Kuo, C. Y. ; Cheng, Y. C. ; Huang, W. N. ; Chang, H. W. ; Huang, Y. M. ; Shih, M. K. |
| 國立彰化師範大學 |
2004-04 |
The Synthesis and Characterization of Titanium Oxide Nanotubes
|
Lin, Chiu-Hsun; Cheng, Y. C. ; Huang, Y. M. ; Chang, H. W. ; Huang, Y. H. ; Lee, Chih-Hao |
| 國立東華大學 |
2004 |
Surface roughness of ZnO films grown by RF magnetron sputtering
|
Lin,Y. S.; Huang,Y. M.; Sasa,S.; Jong, F. C.; Lin, L.Y. |
| 國立彰化師範大學 |
2003-06 |
Synthesis of Niobium Oxide Nanorods and Its Catalytic Activity
|
Lin, Chiu-Hsun; Huang, Y. M. |
| 國立勤益科技大學 |
2002-01 |
Synthesis and Biological Evaluation of Thioglycosylated Porphyrins for an Application in Photodynamic Therapy
|
Sylvain, I.;Zerrouki, R.;Granet, R.;Huang, Y.M.; Lagorce, J.-F.;Guilloton, M.;Blais, J.-C.;Krausza, P. |
