| 國立臺灣科技大學 |
2005 |
Development of Masked Photo-polymerization Rapid Prototyping System using Liquid Crystal Display Panel
|
Jiang, Cho-Pei; Jeng, Jeng-Ywan ; Huang, You-Min ; Tsai, Ming-Jong |
| 國立臺灣科技大學 |
2005 |
Dynamic Reverse Compensation to Increase the Accuracy of the Rapid Prototyping System
|
Huang, You-Min ; Lan, H. Y. |
| 國立臺灣科技大學 |
2005 |
Influence of Blank Profiles on the V-die Bending Camber Process of Sheet Metal
|
Huang, You-Min ; Chen, T.C. |
| 國立臺灣科技大學 |
2005 |
On Line Monitoring of Platform Ascending Rapid Prototyping System
|
Huang, You-Min ; Jiang, C. P. |
| 國立臺灣科技大學 |
2004 |
An Effect of Material Parameters on the Camber Behavior
|
Huang, You-Min ; Chen, T.C. |
| 國立臺灣科技大學 |
2004 |
An Influence of Tool Profiles on the V-bending Process of Sheet Metal
|
Huang, You-Min ; Chen, T.C. |
| 國立臺灣科技大學 |
2004 |
Fundamental Study and Theoretical Analysis in the Constrain-Surface Stereolithography System
|
Huang, You-Min; Kuriyama, S. ; Jiang, C. P. |
| 國立勤益科技大學 |
2003-09 |
An elasto-plastic finite-element analysis of sheet metal camber process
|
Huang, You-Min;Chen, Tsung-Chia |
| 國立臺灣科技大學 |
2003 |
An Elasto-Plastic Finite Element Analysis of Sheet Metal Camber Process
|
Huang, You-Min ; Chen, T. C. |
| 國立臺灣科技大學 |
2003 |
Curl distortion analysis during photopolymerization of stereolithography using dynamic finite element
|
Huang, You-Min ; Jiang, C. P. |
| 國立臺灣科技大學 |
2003 |
Increased Accuracy by using Dynamic Finite Element Method in the Constrain Surface Stereolithography System
|
Huang, You-Min; Jeng, J. Y. ; Jiang, C. P. |
| 國立臺灣科技大學 |
2003 |
Numerical analysis of mask type stereolithography process using dynamic finite element method
|
Huang, You-Min ; Jiang, C. P. |
| 國立臺灣科技大學 |
2002 |
An Elasto-Plastic Finite Element Analysis of the Axisymmetrical Tube-Nosing Process with a Conical Tool
|
Huang, You-Min ; Huang, Yuung-Ming |
| 國立臺灣科技大學 |
2002 |
Influence of cone-semi angle on the limitation of formability in the hole-flanging process
|
Huang, You-Min ; Chien, K. H. |
| 國立臺灣科技大學 |
2002 |
Influence of punch radius and angle on outward curling process of tube
|
Huang, You-Min ; Huang, Youug-Ming |
| 國立臺灣科技大學 |
2001 |
Elastic-Plastic Finite Element Analysis of Axisymmetric Tube-Flaring Process with Conical Punch
|
Huang, You-Min ; Huang, Youug-Ming |
| 國立臺灣科技大學 |
2001 |
Influence of the punch profile on the limitation of formability in the hole-flanging process
|
Huang, You-Min ; Chien, K. H. |
| 國立臺灣科技大學 |
2001 |
The formability limitation of the hole-flanging process
|
Huang, You-Min ; Chien, K. H. |
| 淡江大學 |
1999-05 |
An elasto-plastic finite-element analysis of the metal sheet redrawing process
|
Huang, You-min; 李經綸; Li, Ching-lun |
| 國立臺灣科技大學 |
1999 |
Elasto-plastic finite-element analysis of the metal sheet redrawing process
|
Huang, You-Min ; Li, C. L. |
| 國立臺灣科技大學 |
1999 |
Influence of Punch Shapes on the Collar-Drawing Processing of Sheet Steel
|
Leu, Daw-Kwei; Chen, T. C. ; Huang, You-Min |
| 國立臺灣科技大學 |
1999 |
Rotational Resistance Behavior and Field Testing of Two-Axle Bogie Design
|
Huang, You-Min ; Wang, T. S. |
| 國立臺灣科技大學 |
1999 |
Two-Axle Bogie Design for Electrical Multiple Unit-Part 1: Finite Element Analysis of Bogie Frame Fatigue Strength
|
Huang, You-Min ; Wang, T. S. |
| 國立臺灣科技大學 |
1999 |
Two-Axle Bogie Design for Electrical Multiple Unit-Part2: Bogie Frame Fatigue Test
|
Huang, You-Min ; Wang, T. S. |
| 淡江大學 |
1998-11 |
Limiting drawing ratio of the cup-drawing process with stabilization matrices approach
|
Huang, You-Min; Li, Ching-Lun |
| 淡江大學 |
1998-06 |
Influence of Lubricant on Limit Drawing Ratio in Cup-Drawing Process: A Stabilization Matrices Scheme
|
黃佑民; Huang, You-min; 李經綸; Li, Ching-lun |
| 國立臺灣科技大學 |
1998 |
Effect of Process Variables on V-Die Bending Process of Steel Sheet
|
Huang, You-Min ; Leu, D. K. |
| 國立臺灣科技大學 |
1998 |
Influence of Lubricant on Limit Drawing Ratio in Cup-Drawing Process: A Stabilization Matrices Scheme
|
Huang, You-Min ; Li, C. L. |
| 國立臺灣科技大學 |
1998 |
Limit Drawing Ratio of Cup-Drawing Process with Stabilization Matrices Approach
|
Huang, You-Min ; Li, C. L. |
| 淡江大學 |
1997-01 |
Strategies for improving efficiency on axisymmetric sheet stretching process
|
Lu, Yuung-hwa; 李經綸; Li, Ching-lun; Huang, You-min |
| 國立臺灣科技大學 |
1997 |
Influence of Lubricant on Limitation of Formability of Cylindrical Cup-Drawing
|
Huang, You-Min ; Chen, J. W. |
| 國立臺灣科技大學 |
1996 |
Influence of the Tool Clearance in Cylindrical Cup-Drawing
|
Huang, You-Min ; Chen, J. W. |
| 國立臺灣科技大學 |
1995 |
An Analysis of Square Cup Stretching Process
|
Huang, You-Min ; Liu, C. H. |
| 國立臺灣科技大學 |
1995 |
An Analysis of the Axisymmetric and Non-axisymmetric Sheet Stretching by a Hemispherical Punch
|
Huang, You-Min ; Lu, Y. H. |
| 國立臺灣科技大學 |
1995 |
An Elasto-Plastic Finite Element Analysis of Sheet Metal U-bending Process
|
Huang, You-Min ; Leu, D. K. |
| 國立臺灣科技大學 |
1995 |
An Elasto-Plastic Finite Element Simulation of Successive UO-bending Processes of Sheet Metal
|
Huang, You-Min ; Leu, D. K. |
| 國立臺灣科技大學 |
1995 |
Finite Element Analysis of Contact Problems for Sheet Metal Bending Process
|
Huang, You-Min ; Leu, D. K. |
| 國立臺灣科技大學 |
1995 |
Finite Element Simulation of Bending Process of Steel/Polymer/Steel Laminate Sheets
|
Huang, You-Min ; Leu, D. K. |
| 國立臺灣科技大學 |
1995 |
Influence of the Die Arc on Formability in Cylindrical Cup-Drawing
|
Huang, You-Min ; Chen, J. W. |
| 國立臺灣科技大學 |
1995 |
The Effects of Strain Rate and Anisotropy upon the Sheet Stretching Process
|
Huang, You-Min ; Liu, C. H. |
| 國立臺灣科技大學 |
1993 |
A Rate-Dependent Analysis and Experiment on the Sheet Stretching Process
|
Huang, You-Min ; Liu, C. H. |
| 國立臺灣科技大學 |
1993 |
An Elasto-Plastic Finite Element Analysis of the Axisymmetric Sheet Stretching Process
|
Huang, You-Min ; Chen, J. W. |
| 國立臺灣科技大學 |
1992 |
Analyzing the Cold Nosing Process using Elasto-Plastic and Rigid-Plastic Methods
|
Huang, You-Min; Lu, Y. H. ; Chen, M. C. |
| 國立臺灣科技大學 |
1992 |
Elasto-Plastic Finite Element Analysis of V-Shape Sheet Bending
|
Huang, You-Min; Lu, Y. H. ; Makinouchi, A. |
| 國立臺灣科技大學 |
1992 |
FEM Analysis and Experimental Investigation of the Rod Extrusion Process
|
Huang, You-Min ; Chen, D. J. |
| 國立臺灣科技大學 |
1991 |
An Elasto-Plastic Finite Element and Experimental Study of the Ironing Process
|
Huang, You-Min; Lu, Y. H. ; Chan, J. W. |
| 國立臺灣科技大學 |
1991 |
An Elasto-Plastic Rate Dependent Finite Element Analysis of the Metal Forming Process
|
Huang, You-Min ; Lu, Y. H. |
| 國立臺灣科技大學 |
1990 |
Application of Isoparametric Element of Metal Rolling Process by Finite Element Method
|
Huang, You-Min;Lu, Y. H. |
| 國立臺灣科技大學 |
1987 |
A Elasto-Plastic Analysis of Hydrostatic Bulging of a Circular Sheet
|
Huang, You-Min |
