|
"hwang k s"的相关文件
显示项目 31-55 / 84 (共4页)
<< < 1 2 3 4 > >>
每页显示[10|25|50]项目
| 國立成功大學 |
2010 |
Unstable Vortices Induced by Solitary Waves Propagating Over a Rectangular Barrier
|
Hwang, K. S.; Huang, Z. C.; Hwung, Hwung-Hweng; Chang, K. A. |
| 國立臺灣大學 |
2010 |
Formation mechanism of weak ferrite areas in Ni-containing powder metal steels and methods of strengthening them
|
Wu, M.W.; Hwang, K.S. |
| 國立臺灣大學 |
2010 |
Comparative study of carbon black and graphite powder as carbon source for PM compacts
|
Chen, B.-Y.; Hwang, K.-S. |
| 國立臺灣大學 |
2010 |
Free machining PIM 316L stainless steels
|
Chuang, K.H.; Hwang, K.S. |
| 國立成功大學 |
2008 |
Particle Motions on a Plane Floor under Waves
|
Hwang, K. S.; Hwung, Hwung-Hweng; Huang, P. C. |
| 國立臺灣大學 |
2007-11 |
Improved Distribution of Nickel and Carbon in Sintered Steels through the Addition of Chromium and Molybdenum
|
Wu, M. W.; Hwang, K. S.; Chuang, K. H. |
| 國立臺灣大學 |
2007-11 |
The Mechanisms of the Formation and Elimination of Weak Ni-rich Areas in PM Steels
|
Hwang, K. S.; Wu, M. W. |
| 國立臺灣大學 |
2007-11 |
Causes of Defects and Deformations in Powder Injection Molded Components during Solvent Debinding
|
Hwang, K. S.; Fan, Y. L. |
| 國立臺灣大學 |
2007-11 |
Sinter-Hardened Ultrahigh-Strength PM Steels with Homogeneous Alloying and Microstructures
|
Wu, M. W.; Hwang, K. S. |
| 國立成功大學 |
2007-03-07 |
Large Scale Experiment and Run-up of Breaking Solitary Waves
|
Hwang, K. S.; Chang, Y. H.; Hwung, Hwung-Hweng; Li, Y. S. |
| 國立臺灣大學 |
2007 |
Post-sintering thermal treatment of nitrogen containing pressed and sintered and PIM stainless steels
|
Hwang, K.S.; Hsueh, Y.W. |
| 國立臺灣大學 |
2007 |
In-Situ Observations on the Fracture Mechanism of Diffusion-Alloyed Ni-Containing Powder Metal Steels and a Proposed Method for Tensile Strength Improvement
|
Wu, M. W.; Hwang, K. S.; Huang, H. S. |
| 國立臺灣大學 |
2006 |
Improvements in sintered density and dimensional stability of powder injection-molded 316L compacts by adjusting the alloying compositions
|
Shu, G.J.; Hwang, K.S.; Pan, Y.T. |
| 國立臺灣大學 |
2006 |
Improvements in microstructure homogenization and mechanical properties of diffusion-alloyed steel compact by the addition of Cr-containing powders
|
Wu, M. W.; Hwang, K. S.; Huang, H. S.; Narasimhan, K. S. |
| 國立臺灣大學 |
2006 |
Improved homogenization of Ni in sintered steels through the use of Cr-containing prealloyed powders
|
Wu, M. W.; Hwang, K. S. |
| 國立臺灣大學 |
2006 |
Identifications of Crack Initiation Sites of Ni-Containing Steels and Methods for Property Improvement
|
Wu, M. W.; Hwang, K. S. |
| 國立臺灣大學 |
2006 |
Thermal Dissipation Performance of a Heat Sink/Vapor Chamber Prepared by Metal Injection Molding Process
|
Chen, B.Y.; Hwang, K.S.; Wang, C.C. |
| 國立成功大學 |
2005-09-04 |
On the Stability of a Submerged Discharge Head under Waves
|
Hwang, K. S.; Chen, H. H.; Hwung, Hwung-Hweng |
| 國立臺灣大學 |
2005 |
Solvent debinding behavior of powder injection molded components prepared from powders with different particle sizes
|
Hwang, K. S.; Shu, G. J.; Lee, H. J. |
| 國立臺灣大學 |
2005 |
Diamond cutting tools with a Ni3Al matrix processed by reaction pseudo-hipping
|
Hwang, K. S.; Yang, T. H.; Hu, S. C. |
| 國立臺灣大學 |
2005 |
Injection-Molded Alumina Prepared with Mg-Containing Binders
|
Hwang, K. S.; Hsieh, C. C. |
| 國立臺灣大學 |
2005 |
Effect of Alloy Composition and Sintering Parameters on the Dimensional Stability of PIM Compacts
|
Hwang, K. S. |
| 國立臺灣大學 |
2004 |
Ductility improvement of Ni-added molybdenum compacts through the addition of Cu and Fe powders
|
Hwang, K.S.; Huang, H.S. |
| 國立臺灣大學 |
2004 |
Improved Dimensional Control of PIM Compacts Through the Adjustment in Sintering Parameters
|
Shu, G. J.; Hwang, K. S. |
| 國立臺灣大學 |
2004 |
Effect of Particle Size on the Debinding of PIM Parts
|
Lee, H. R.; Shu, G. J.; Hwang, K. S. |
显示项目 31-55 / 84 (共4页)
<< < 1 2 3 4 > >>
每页显示[10|25|50]项目
|
