|
"hwang k s"的相關文件
顯示項目 51-75 / 84 (共4頁)
<< < 1 2 3 4 > >>
每頁顯示[10|25|50]項目
| 國立臺灣大學 |
2005 |
Injection-Molded Alumina Prepared with Mg-Containing Binders
|
Hwang, K. S.; Hsieh, C. C. |
| 國立臺灣大學 |
2005 |
Effect of Alloy Composition and Sintering Parameters on the Dimensional Stability of PIM Compacts
|
Hwang, K. S. |
| 國立臺灣大學 |
2004 |
Ductility improvement of Ni-added molybdenum compacts through the addition of Cu and Fe powders
|
Hwang, K.S.; Huang, H.S. |
| 國立臺灣大學 |
2004 |
Improved Dimensional Control of PIM Compacts Through the Adjustment in Sintering Parameters
|
Shu, G. J.; Hwang, K. S. |
| 國立臺灣大學 |
2004 |
Effect of Particle Size on the Debinding of PIM Parts
|
Lee, H. R.; Shu, G. J.; Hwang, K. S. |
| 國立臺灣大學 |
2003-12 |
Improved Densification of Injection Molded Carbonyl Iron Compacts with the Addition of a-Phase Stabilizers
|
Shu, G. J.; Hwang, K. S. |
| 國立成功大學 |
2003 |
Velocity Measurements in Modulated Waves
|
Hwung, Hwung-Hweng; Hwang, K. S.; Chang, Yu-Hsuan; Chen, H. H.; Huang, G. J. |
| 國立臺灣大學 |
2003 |
Identification of the segregation layer and its effects on the activated sintering and ductility of Ni-doped molybdenum
|
Hwang, K. S.; Huang, H. S. |
| 國立臺灣大學 |
2003 |
Effects ofcontaminationonproperties of W-15Cu preparedfrom mechanically alloyed powders
|
Hwang, K.S.; Yu, C.P.; Yang, C.K.; Yeh, C.H.; Wang, L.-Y. |
| 國立臺灣大學 |
2002-12 |
Methods to Increase the Sintered Density of Coarse Iron Powders
|
Shu, G. J.; Hwang, K. S. |
| 國立臺灣大學 |
2002-12 |
Embrittlement Mechanism of Activation Sintered Molybdenum
|
Huang, H. S.; Hwang, K. S. |
| 國立臺灣大學 |
2002 |
Effect of lubricant addition on the powder properties and compacting performance of spray-dried molybdenum powders
|
Huang, H. S.; Lin, Y. C.; Hwang, K. S. |
| 國立臺灣大學 |
2002 |
Deoxidation of molybdenum during vacuum sintering
|
Huang, H. S.; Hwang, K. S. |
| 國立臺灣大學 |
2002 |
Comparison of mechanical properties of Fe-1.75Ni-0.5Mo-1.5Cu-0.4C steels made from PIM and press and sinter processes
|
Hwang, K.S.; Hsieh, C.H.; Shu, G.J. |
| 國立臺灣大學 |
2002 |
Comparison of the Mechanical Properties of Fe-1.75Ni-0.5Mo-1.5Cu-0.4C Steels made from the PIM and the Press-and-Sinter Processes
|
Hwang, K. S.; Hsieh, C. H.; Shu, G. J. |
| 國立臺灣大學 |
2002 |
Effect of Lubricant on the Powder Properties and Compacting Performance of Spray-Dried Molybdenum Powders
|
Huang, H. S.; Lin, Y. C.; Hwang, K. S. |
| 國立臺灣大學 |
2001 |
The liquid phase sintering of molybdenum with Ni and Cu additions
|
Hwang, K. S.; Huang, H. S. |
| 國立臺灣大學 |
2001 |
Effect of Lubricant on Powder Properties and Compacting Performance of iron and Stainless steel Powders. I, Powder properties
|
Lin, Y. C.; Hwang, K. S. |
| 國立臺灣大學 |
2001 |
Effect of Lubricant on Powder Properties and Compacting Performance of iron and Stainless steel Powders. II, Compacting Performance
|
Lin, Y. C.; Hwang, K. S. |
| 國立成功大學 |
2000 |
Steady Streaming under Nonlinear Waves over Ripple Beds
|
Chiang, Wen-Son; Hwung, Hwung-Hweng; Tang, C. J.; Hwang, K. S. |
| 國立成功大學 |
2000 |
Hydraulic Modeling Study on a Circulating Water-Pump Intake
|
Hwung, Hwung-Hweng; Hwang, K. S.; Chen, T. W. |
| 國立成功大學 |
2000 |
Particle Motion in Wave Boundary Layer
|
Hwung, Hwung-Hweng; Hwang, K. S.; Huang, P. C. |
| 國立臺灣大學 |
2000 |
Improved densification of carbonyl iron compacts by the addition of fine alumina powders
|
Lu, Y. C.; Hwang, K. S. |
| 國立臺灣大學 |
2000 |
Length change and deformation of powder injection-molded compacts during solvent debinding
|
Hu, S. C.; Hwang, K. S. |
| 國立臺灣大學 |
2000 |
Dilatometric analysis of thermal debinding of injection moulded iron compacts
|
Hu, S.C.; Hwang, K.S. |
顯示項目 51-75 / 84 (共4頁)
<< < 1 2 3 4 > >>
每頁顯示[10|25|50]項目
|
