| 國立成功大學 |
2022-10-17 |
機能性粉末投予裝置及其系統
|
林錫璋;LIN, XI-ZHANG;施雅雯;SHIH, YA-WEN;黃聖杰;HWANG, SHENG-JYE |
| 淡江大學 |
2022-09-26 |
Correlation Between Fiber Orientation and Geometrical Shrinkage of Injected Parts Under the Influence of Flow-Fiber Coupling Effect
|
Huang*, Chao-Tsai;Wang, Jun-Zheng;Lai, Cheng-Hong;Hwang, Sheng-Jye;Huang, Po-Wei;Peng, Hsin-Shu |
| 淡江大學 |
2022-09-15 |
Influence of back pressure and geometry on microstructure of injection-molded long-glass-fiber-reinforced polypropylene ribbed plates.
|
Wang, Kuan-Hsun;Chen, Ya-Tung;Hwang*, Sheng-Jye;Huang, Chao-Tsai;Peng, Hsin-Shu |
| 淡江大學 |
2022-03-20 |
Fabrication and Property Characterization of Long-Glass-Fiber-Reinforced Polypropylene Composites Processed Using a Three-Barrel Injection Molding Machine
|
Liou, Guan-Yan;Su, Chi-Wei;Huang, Po-Wei;Hwang*, Sheng-Jye;Huang, Chao-Tsai;Peng, Hsin-Shu |
| 淡江大學 |
2021-07-28 |
The Low Breaking Fiber Mechanism and Its Effect on the Behavior of the Melt Flow of Injection Molded Ultra-Long Glass Fiber Reinforced Polypropylene Composites
|
Huang, Po-Wei;Peng, Hsin-Shu;Hwang, Sheng-Jye;Huang, Chao-Tsai |
| 淡江大學 |
2021-05-31 |
The flow-fiber coupling behavior and its effect on the dimensional variation of fiber-reinforced plastics (FRP) injection parts
|
Lai, Cheng-Hong;Huang, Chao-Tsai;Chu, Jia-Hao;Fu, Wei-Wen;Hwang, Sheng-Jye;Peng, Hsin-Shu;Wu, Chih-Che;Tu, Chun-I |
| 淡江大學 |
2021-05-13 |
STUDY ON THE FLOW-FIBER COUPLING EFFECT AND ITS INFLUENCE ON THE SHRINKAGE OF FIBER-REINFORCED PLASTIC (FRP) INJECTION PARTs
|
Lai, Cheng-Hong;Huang, Chao-Tsai (CT);Chu, Jia-Hao;Fu, Wei-Wen;Hwang, Sheng-Jye;Peng, Hsin-Shu;Wu, Chih-Che;Tu, Chun-I |
| 淡江大學 |
2020/05/05 |
Study on the Design-induced Fiber Orientation and Their Influences on Warpage in Injection Fiber Reinforced Plastic (FRP) Parts
|
Chu, Jia-Hao;Huang, Chao-Tsai (CT);Hsu, Chia;Fu, Wei-Wen;Hwang, Sheng-Jye |
| 淡江大學 |
2020/-05-05 |
STUDY ON THE DESIGN-INDUCED FIBER ORIENTATION AND THEIR INFLUENCES ON WARPAGE IN INJECTION FIBER REINFORCED PLASTIC (FRP) PARTS
|
Chu, Jia-Hao;Huang, Chao-Tsai (CT);Hsu, Chia;Fu, Wei-Wen;Hwang, Sheng-Jye |
| 淡江大學 |
2020-11-19 |
Influence of low-fracture-fiber mechanism on fiber/melt-flow behavior and tensile properties of ultra-long-glass-fiber-reinforced polypropylene composites injection molding
|
Huang, Po-Wei;Peng, Hsin-Shu;Hwang, Sheng-Jye;Huang, Chao-Tsai |
| 淡江大學 |
2020-06-30 |
Flow-induced Orientations of Fibers and Their Influences on Warpage and Mechanical Property in Injection Fiber Reinforced Plastic (FRP) Parts.
|
Huang, Chao-Tsai;Chu, Jia-Hao;Fu, Wei-Wen;Hsu, Chia;Hwang, Sheng-Jye |
| 淡江大學 |
2019-03-19 |
Investigation on the Microstructures of Long Fiber and Their Influences on Warpage and Mechanical Property in Injection Reinforced Thermoplastics (FRT) Parts.
|
Huang, Chao-Tsai (CT);Hsu, Chia;Hwang, Sheng-Jye;Peng, Hsin-Shu;Wu, Chih-Che;Tu, Chun-I |
| 淡江大學 |
2018-05-23 |
Study on the Influences on Fiber Micro-structure Variations and the Connection to Final Shrinkage/Warpage on Long Fiber Reinforced Thermoplastics (FRT) Parts
|
Huang, Chao-Tsai (CT);Hsu, Chia;Yeh, Cherng-En;Chen, Yi-Sheng;Hwang, Sheng-Jye;Peng3, Hsin-Shu;Wu, Chih-Che;Tu, Chun-I |
| 淡江大學 |
2018-05 |
Geometrical Effects on Fiber Micro-structure Variations and the Influences on Long Fiber Reinforced Thermoplastics (FRT) Parts
|
Huang, Chao-Tsai (CT);Hsu, Chia;Chen, Yi-Sheng;Hwang, Sheng-Jye;Peng, Hsin-Shu;Wu, Chih-Che;Tu, Chun-I |
| 淡江大學 |
2016/09/23 |
Fiber Breakage History through a Barrier Structure Screw in Injection Molding
|
Huang, Chao-Tsai;Tseng, Huan-Chang;Chang, Rong-Yeu;Hwang, Sheng-Jye |
| 淡江大學 |
2016/07/27 |
Study on the Fiber Breakage History through a Barrier Structure Screw in Injection Molding
|
Huang, Chao-Tsai (C.T.);Tseng, Huan-Chang;Chang, Rong-Yeu;Hwang, Sheng-Jye |
| 國立成功大學 |
2016-09-07 |
Experimental study of the heat recovery rate in a porous medium combustor under different hydrogen combustion modes
|
Su, Siou-Sheng; Lai, Wei-Hsiang; Hwang, Sheng-Jye |
| 國立成功大學 |
2016-07 |
Temperature prediction for system in package assembly during the reflow soldering process
|
deng, Shang-Shiuan; Hwang, Sheng-Jye; Lee, Huei-Huang |
| 國立成功大學 |
2016-04-15 |
Enhanced hydrogen storage properties of MgH2 co-catalyzed with zirconium oxide and single-walled carbon nanotubes
|
Hwang, Sheng-Jye; Chuang, Yu-Siang |
| 國立成功大學 |
2016-04 |
Develop Potential Solution to the Engineering Conflicts of Additive Manufacturing by Using the Theory of Solution of Inventive Problems (TRIZ) - The Case of Material Jetting Process
|
Wang, Yu-Hui; Trappey, Amy J. C.; Hwang, Sheng-Jye; Chen, Kuan-Linx |
| 國立成功大學 |
2016-01-25 |
Synthesis and hydrogen absorption/desorption properties of Mg-Nb2O5-SWCNT/MWCNT nanocomposite prepared by reactive milling
|
Chuang, Yu-Siang; Hwang, Sheng-Jye |
| 國立成功大學 |
2016 |
Design with White Light-Emitting Diodes for an Automotive Low-Beam Projector Headlamp
|
Chiang, Yueh-Ying; Hwang, Sheng-Jye; Lee, Huei-Huang; Hwang, Deng-Yuan; Liao, Chien-Chih |
| 國立成功大學 |
2015-12 |
Production of Gas-Atomized Aluminum Alloy Powders for Metal Additive Manufacturing Processes
|
Wang, Muh-Rong; Huang, Yang-Sheng; Tseng, Wei-Chieh; Lai, Kuan-Lan; Hwang, Sheng-Jye |
| 國立成功大學 |
2015-07 |
Modeling a working coil coupled with magnetic flux concentrators for barrel induction heating in an injection molding machine
|
Bui, Huy-Tien; Hwang, Sheng-Jye |
| 國立成功大學 |
2015-02 |
Design of an induction heating coil coupled with magnetic flux concentrators for barrel heating of an injection molding machine
|
Bui, Huy-Tien; Hwang, Sheng-Jye |
| 國立成功大學 |
2015 |
Development of barrel heating system in injection molding machine via induction heating
|
Bui, Huy-Tien; Hwang, Sheng-Jye |
| 國立成功大學 |
2014-12-12 |
On a porous medium combustor for hydrogen flame stabilization and operation
|
Su, Siou-Sheng; Hwang, Sheng-Jye; Lai, Wei-Hsiang |
| 國立成功大學 |
2014-08 |
Effect of Nb2O5 and SWCNT on the H-2 sorption properties of Mg-based hydrogen storage system
|
Chuang, Yu-Siang; Hwang, Sheng-Jye |
| 國立成功大學 |
2014 |
Study on Induction Heating Coil for Uniform Mold Cavity Surface Heating
|
Sung, Yu-Ting; Hwang, Sheng-Jye; Lee, Huei-Huang; Huang, Durn-Yuan |
| 國立成功大學 |
2013-03 |
Warpage Prediction and Experiments of Fan-Out Waferlevel Package During Encapsulation Process
|
Deng, Shang-Shiuan; Hwang, Sheng-Jye; Lee, Huei-Huang |
| 國立成功大學 |
2013-02 |
Design and fabrication of an adhesion force tester for the injection moulding process
|
Chen, Jian-Yu; Hwang, Sheng-Jye |
| 國立成功大學 |
2012-07 |
Investigation of adhesion phenomena in thermoplastic polyurethane injection molding process
|
Chen, Jian-Yu; Hwang, Sheng-Jye |
| 國立成功大學 |
2012-01-26 |
電磁熱療法之治療器具
|
李國賓; Lin, Xi-Zhang; Huang, Sheng-Chieh; Chang, Yi-Yuan; Shan, Yan-Shen; Hwang, Sheng-Jye; Lee, Tung-Jen; Chen, Szu-Yin; Chen, Ping-Hen |
| 國立成功大學 |
2011-11 |
Modeling of Viscoelastic Behavior of an Epoxy Molding Compound During and After Curing
|
Lin, Yeong-Jyh; Hwang, Sheng-Jye; Lee, Huei-Huang; Huang, Durn-Yuan |
| 國立成功大學 |
2011-01 |
Volume Shrinkage Characterization of Underfill Materials
|
Deng, Shang-Shiuan; Ho, Chia-Yi; Lee, Huei-Huang; Hwang, Sheng-Jye; Huang, Durn-Yuan |
| 國立成功大學 |
2009-03 |
Effects of defrosting period on mold adhesion force of epoxy molding compound
|
Chen, Hwe-Zhong; Lee, Wen-Hung; Lee, Huei-Huang; Huang, Durn-Yuan; Chang, Shyang-Jye; Hwang, Sheng-Jye |
| 國立成功大學 |
2008-10 |
Simulation and Design of Multiple-Station Rolling Forming for U-Section Steel Bar
|
Lin, Chin-Wei; Lee, Huei-Huang; Hwang, Sheng-Jye; Huang, Durn-Yuan |
| 國立成功大學 |
2008-10 |
Reduction of Photo Leakage Current of Hydrogenated Amorphous Silicon Thin Film Transistors
|
Liu, Yu-Ting; Lee, Huei-Huang; Hwang, Sheng-Jye; Huang, Durn-Yuan |
| 國立成功大學 |
2008-01 |
Simulations and experiments of three-dimensional paddle shift for IC packaging
|
Teng, Shiang-Yu; Hwang, Sheng-Jye |
| 國立成功大學 |
2007-12 |
Predicting the process induced warpage of electronic packages using the P-V-T-C equation and the Taguchi method
|
Teng, Shiang-Yu; Hwang, Sheng-Jye |
| 國立成功大學 |
2007-09 |
Simulations of process-induced warpage during IC encapsulation process
|
Teng, Shiang-Yu; Hwang, Sheng-Jye |
| 國立成功大學 |
2007-04-12 |
Development of an external-type microinjection molding module for thermoplastic polymer
|
Chang, Pei-Chi; Hwang, Sheng-Jye; Lee, Huei-Huang; Huang, Dum-Yuan |
| 國立成功大學 |
2006-11-15 |
Experimental investigation of infrared rapid surface heating for injection molding
|
Chang, Pei-Chi; Hwang, Sheng-Jye |
| 國立成功大學 |
2006-10 |
Simulation of infrared rapid surface heating for injection molding
|
Chang, Pei-Chi; Hwang, Sheng-Jye |
| 國立成功大學 |
2006-09-25 |
The influence of Cr-based coating on the adhesion force between epoxy molding compounds and IC encapsulation mold
|
Chiu, S. M.; Hwang, Sheng-Jye; Chu, C. W.; Gan, Dershin |
| 國立成功大學 |
2006-03 |
P-V-T-C equation for epoxy molding compound
|
Hwang, Sheng-Jye; Chang, Yi-San |
| 國立成功大學 |
2006-02 |
Injection molding of microprobe array parts
|
Chang, Pei-Chi; Hwang, Sheng-Jye |
| 國立成功大學 |
2006 |
vGeometry influence of reflectors for infrared rapid heating on micro-injection molding
|
Chang, Pei-Chi; Hwang, Sheng-Jye |
| 國立成功大學 |
2006 |
Design and verification of a clamping system for micro-injection molding machine
|
Chang, P. C.; Hwang, Sheng-Jye; Lee, Huei-Huang; Huang, D. Y. |
| 國立成功大學 |
2005-09-01 |
Isobaric cure shrinkage behaviors of epoxy molding compound in isothermal state
|
Hwang, Sheng-Jye; Chang, Yi-San |
