| 國立成功大學 |
2005-04 |
Effect of film thickness on structural and electrical properties of sputter-deposited nickel oxide films
|
Chen, Hao-Long; Lu, Yang-Ming; Hwang, Weng-Sing |
| 國立成功大學 |
2005-01 |
A numerical study of the effect of operating parameters on drop formation in a squeeze mode inkjet device
|
Wu, Hsuan-Chung; Lin, Huey-Jiuan; Hwang, Weng-Sing |
| 國立成功大學 |
2005 |
Special issue - MCSP6-2004
|
Hwang, Weng-Sing |
| 國立成功大學 |
2004-12-22 |
Thermal stability and bonding configuration of fluorine-modified low-k SiOC : H composite films
|
JangJian, Shiu-Ko; Liu, Chuan-Pu; Wang, Ying-Lang; Hwang, Weng-Sing; Tseng, Wei-Tsu |
| 國立成功大學 |
2004-12 |
Characterization of SnO2/TiO2 double-layer films as alcohol sensing materials
|
Yeh, Meng-Heng; Hwang, Weng-Sing; Lee, Gwo-Bin; Lu, Yang-Ming |
| 國立成功大學 |
2004-06 |
Forging condition for removing porosities in the hybrid casting and forging process of 7075 aluminum alloy casting
|
Chang, Fung-Chi; Hwang, Weng-Sing; Lee, Chung-Ham; Wu, Chun-Fu; Yang, Jin-Bin |
| 國立成功大學 |
2004-06 |
Pasty ranges and latent heat release modes for Sn-9Zn-xAg lead-free solder alloys
|
Tsai, Ying-Ling; Hwang, Weng-Sing |
| 國立成功大學 |
2004-05 |
Study of micro-droplet behavior for a piezoelectric inkjet printing device using a single pulse voltage pattern
|
Wu, Hsuan-Chung; Shan, Tzu-Ray; Hwang, Weng-Sing; Lin, Huey-Jiuan |
| 國立成功大學 |
2004-03 |
Simulation of droplet ejection for a piezoelectric inkjet printing device
|
Wu, Hsuan-Chung; Lin, Huey-Jiuan; Kuo, Yung-Chi; Hwang, Weng-Sing |
| 國立成功大學 |
2004-01-30 |
Fluorine-modified low-k a-SiOC : H composite films prepared by plasma enhanced chemical vapor deposition
|
JangJean, Shiuh-Ko; Liu, Chuan-Pu; Wang, Ying-Lang; Hwang, Weng-Sing; Tseng, Wei-Tsu; Chen, Sheng-Wen; Lo, Kuang-Yao |
| 國立成功大學 |
2003-10 |
Mold filling analysis in lost foam casting process for aluminum alloys and its experimental validation
|
Kuo, Jer-Haur; Chen, Jui-Ching; Pan, Yung-Ning; Hwang, Weng-Sing |
| 國立成功大學 |
2003-10 |
Studies by mathematical and physical modelling of fluid flow and inclusion removal phenomena in slab tundish for casting stainless steel using various flow control device designs
|
Fan, C. M.; Shie, R. J.; Hwang, Weng-Sing |
| 國立成功大學 |
2003-08 |
Study of solid mushroom formation in direct iron ore smelting reduction process using low temperature water model
|
Hwang, Y. P.; Fan, C. M.; Chen, Y. L.; Hwang, Weng-Sing; Chen, I. G.; Liu, S. H. |
| 國立成功大學 |
2003-07 |
Mathematical modeling for the solidification heat-transfer phenomena during the reflow process of lead-tin alloy solder joint in electronics packaging
|
Chiu, Yu-Fang; Tsai, Ying-Ling; Hwang, Weng-Sing |
| 國立成功大學 |
2003-06-30 |
In situ fluorine-modified organosilicate glass prepared by plasma enhanced chemical vapor deposition
|
JangJean, Shiuh-Ko; Wang, Ying-Lang; Liu, Chuan-Pu; Hwang, Weng-Sing; Tseng, Wei-Tsu; Liu, Chi-Wen |
| 國立成功大學 |
2003-06 |
Effects of process conditions on mixing between molten iron and slag in smelting reduction vessel via water model study
|
Chou, J. M.; Chuang, M. C.; Yeh, M. H.; Hwang, Weng-Sing; Liu, S. H.; Tsai, S. T.; Wang, H. S. |
| 國立成功大學 |
2003-05-25 |
Development of a three-dimensional simulation system for micro-inkjet and its experimental verification
|
Wu, Hsuan-Chung; Hwang, Weng-Sing; Lin, Huey-Jiuan |
| 國立成功大學 |
2003 |
Numerical simulation of inclusion removal in a billet continuous casting mold based on the partial-cell technique
|
Ho, Yeong-Ho; Hwang, Weng-Sing |
| 國立成功大學 |
2002-12-02 |
Properties of nickel oxide thin films deposited by RF reactive magnetron sputtering
|
Lu, Yang-Ming; Hwang, Weng-Sing; Yang, J. S.; Chuang, H. C. |
| 國立成功大學 |
2002-12 |
Study of optimal Ca-Si injection position in gas stirred ladle based on water model experiment and flow simulation
|
Fan, Chih-Ming; Hwang, Weng-Sing |
| 國立成功大學 |
2002-10 |
Design of single element flow control device in twin strand billet tundish for continuous casting of steel using flow simulation model
|
Fan, Chih-Ming; Pan, S. M.; Wang, H. S.; Hwang, Weng-Sing |
| 國立成功大學 |
2002-06-17 |
Effects of substrate temperature on the resistivity of non-stoichiometric sputtered NiOx films
|
Lu, YM; Hwang, Weng-Sing; Yang, J. S. |
| 國立成功大學 |
2002 |
Measurement of interfacial heat transfer coefficient for the evaporative pattern casting of A356 aluminium alloy
|
Chen, J. C.; Kuo, J. H.; Hwang, Weng-Sing |
| 國立成功大學 |
2002 |
Measurements of thermal expansion coefficients and melting ranges for Sn-9Zn-xAg lead-free solder alloys
|
Tsai, Y. L.; Hwang, Weng-Sing; Wang, H. S.; Wu, M. H. |
| 國立成功大學 |
2002 |
Computer simulation for the investment casting of rene 77 alloy and its experimental verification
|
Ho, K. S.; Hwang, Weng-Sing |
