| 國立成功大學 |
2009 |
An Investigation on Luminescence and Energy Transfer of Ce3+ and Tb3+ in Ca3Y2Si3O12 Phosphors
|
Bandi, Vengala Rao; Nien, Yung-Tang; Hwang, Weng-Sing; Chen, In-Gann |
| 國立成功大學 |
2008-10-15 |
Effect of different atmospheres on the electrical stabilization of NiO films
|
Jang, Wei-Luen; Lu, Yang-Ming; Hwang, Weng-Sing |
| 國立成功大學 |
2008-09 |
Synthesis of surfactant-free aligned single crystal copper nanowires by thermal-assisted photoreduction
|
Tung, Hsien-Tse; Song, Jenn-Ming; Dong, Teng-Yuan; Hwang, Weng-Sing; Chen, In-Gann |
| 國立成功大學 |
2008-08-30 |
Effect of substrate temperature on the electrically conductive stability of sputtered NiO films
|
Jang, Wei-Luen; Lu, Yang-Ming; Hwang, Weng-Sing; Hsiung, Tung-Li; Wang, H. Paul |
| 國立成功大學 |
2008-08-20 |
Effects of pulse voltage on inkjet printing of a silver nanopowder suspension
|
Tsai, M. H.; Hwang, Weng-Sing; Chou, H. H.; Hsieh, P. H. |
| 國立成功大學 |
2008-06-30 |
Determination of alcohols using a Ni-Pt alloy amperometric sensor
|
Huang, Jian-Jia; Hwang, Weng-Sing; Weng, Yu-Ching; Chou, Tse-Chuan |
| 國立成功大學 |
2008-06 |
Numerical simulation of the solidification microstructure of a 17-4PH stainless steel investment casting and its experimental verification
|
Li, You-Yun; Tsai, De-Chang; Hwang, Weng-Sing |
| 國立成功大學 |
2008-06 |
Process design optimization through numerical experimentation for a brake disc casting
|
Yeh, Chun-Ping; Hwang, Weng-Sing; Lin, Chien-Hen |
| 國立成功大學 |
2008-04 |
Numerical study of fluid flow behaviors in an alkali-free glass melting furnace
|
Yen, Chien-Chih; Hwang, Weng-Sing |
| 國立成功大學 |
2008-02 |
Effects of pulse voltage on the droplet formation of alcohol and ethylene glycol in a piezoelectric inkjet printing process with bipolar pulse
|
Tsai, Ming-Hsiu; Hwang, Weng-Sing |
| 國立成功大學 |
2007-11-01 |
Interdiffusion behavior at the interfaces between deposits of Au nanoparticles and electronic substrates
|
Kao, Tzu-Hsuan; Song, Jenn-Ming; Chen, In-Gann; Dong, Teng-Yuan; Hwang, Weng-Sing |
| 國立成功大學 |
2007-11 |
Microstructure and properties of Cu-0.6Cr alloy after vacuum continuous casting
|
Tsai De-chang; Hwang, Weng-Sing; Chen Siang-yong; Kang Jin-sing; Jiang Cheng-xue |
| 國立成功大學 |
2007-10 |
Numerical simulation of the liquid-gas interface shape in the shot sleeve of cold chamber die casting machine
|
Han, Tsung-Hsien; Kuo, Jer-Haur; Hwang, Weng-Sing |
| 國立成功大學 |
2007-09 |
Study of solid accretion formation inside pyrometallurgical vessels by a wax model and similarity conversion for gas bottom-blown process
|
Huang, Yu-Pin; Kuo, Chiung-Chieh; Hwang, Weng-Sing; Shiau, Jia-Shyan; Liu, Shih-Hsien |
| 國立成功大學 |
2007-07 |
Effect of annealing on the interfacial structure of aluminum-copper joints
|
Chen, Chih-Yuan; Hwang, Weng-Sing |
| 國立成功大學 |
2007-06-15 |
Preparation, properties, and anticorrosion application of poly(methyl methacrylate)/montmorillonite nanocomposites coating on brass via solution polymerization
|
Wang, Tien-Li; Hwang, Weng-Sing; Yeh, Meng-Heng |
| 國立成功大學 |
2007-03-15 |
Microstructure and mechanical properties of neoprene-montmorillonite nanocomposites
|
Yeh, Meng-Heng; Hwang, Weng-Sing; Cheng, Lin-Ri |
| 國立成功大學 |
2007-02 |
Development and verification of accretion similarity conversion method for gas bottom-blowing process inside pyrometallurgical vessels
|
Huang, Yu-Pin; Hwang, Weng-Sing; Shiau, Jia-Shyan; Liu, Shih-Hsien |
| 國立成功大學 |
2006-12-15 |
Substrate effects on the oxygen gas sensing properties of SnO2/TiO2 thin films
|
Lee, Hsiao-Ching; Hwang, Weng-Sing |
| 國立成功大學 |
2006-11 |
High mechanical properties of polychloroprene/montmorillonite nanocomposites
|
Yeh, Meng-Heng; Hwang, Weng-Sing |
| 國立成功大學 |
2006-10 |
Effects of solid fraction on the heat transfer coefficient at the casting/mold interface for permanent mold casting of AZ91D magnesium alloy
|
Kuo, Jer-Haur; Weng, Ruey-Jer; Hwang, Weng-Sing |
| 國立成功大學 |
2006-09 |
Experimental investigation on earing behavior of aluminum/copper bimetal sheet
|
Chen, Chih-Yuan; Kuo, Jui-Chao; Chen, Hao-Long; Hwang, Weng-Sing |
| 國立成功大學 |
2006-04 |
Influence of interfacial structure development on the fracture mechanism and bond strength of aluminum/copper bimetal plate
|
Chen, Chih-Yuan; Chen, Hao-Long; Hwang, Weng-Sing |
| 國立成功大學 |
2006-03-15 |
Effects of O-2/Ar flow ratio on the alcohol sensitivity of tin oxide film
|
Lee, Hsiao-Ching; Hwang, Weng-Sing; Lee, Gwo-Bin; Lu, Yang-Ming |
| 國立成功大學 |
2006-03-01 |
Thickness dependence of electrical and optical properties of sputtered nickel oxide films
|
Chen, Hao-Long; Lu, Yang-Ming; Hwang, Weng-Sing |
| 國立成功大學 |
2006-02 |
The effects of operating parameters on micro-droplet formation in a piezoelectric inkjet printhead using a double pulse voltage pattern
|
Lin, Huey-Jiuan; Wu, Hsuan-Chung; Shan, Tzu-Ray; Hwang, Weng-Sing |
| 國立聯合大學 |
2006 |
The effects of operating parameters on micro-droplet formation in a piezoelectric inkjet printhead using a double pulse voltage pattern
|
Lin, Huey-Jiuan; Wu, Hsuan-Chung; Shan, Tzu-Ray; Hwang, Weng-Sing |
| 國立成功大學 |
2006 |
Multi-phase flow simulations in direct iron ore smelting reduction process
|
Chuang, Hsin-Chien; Kuo, Hsin-Chien; Huang, Chien-Chia; Liu, Shih-Hsien; Hwang, Weng-Sing |
| 國立成功大學 |
2005-12-15 |
Solidification behavior of Sn-9Zn-xAg lead-free solder alloys
|
Tsai, Ying-Ling; Hwang, Weng-Sing |
| 國立成功大學 |
2005-11 |
Effects of substrate temperature and oxygen pressure on crystallographic orientations of sputtered nickel oxide films
|
Chen, Hao-Long; Lu, Yang-Ming; Wu, Jun-Yi; Hwang, Weng-Sing |
| 國立成功大學 |
2005-09 |
Dispersibility of amphibious montmorillonite
|
Yeh, Meng-Heng; Hwang, Weng-Sing; Kuo, Wuei-Jueng |
| 國立成功大學 |
2005-09 |
Preparation and mechanical properties of polychloroprene-montmorillonite composites
|
Yeh, Meng-Heng; Hwang, Weng-Sing; Chang, Yu-Chia |
| 國立成功大學 |
2005-08-01 |
Characterization of sputtered NiO thin films
|
Chen, Hao-Long; Lu, Yang-Ming; Hwang, Weng-Sing |
| 國立成功大學 |
2005-08 |
Enhancing the sensitivity of oxygen sensors through the photocatalytic effect of SnO2/TiO2 film
|
Lee, Hsiao-Ching; Hwang, Weng-Sing |
| 國立成功大學 |
2005-07-01 |
Effects of substrate temperature and oxygen pressure on crystallographic orientations of sputtered nickel oxide films
|
Chen, H. L.; Lu, Y. M.; Wu, J. Y.; Hwang, Weng-Sing |
| 國立成功大學 |
2005-04 |
Effect of film thickness on structural and electrical properties of sputter-deposited nickel oxide films
|
Chen, Hao-Long; Lu, Yang-Ming; Hwang, Weng-Sing |
| 國立成功大學 |
2005-01 |
A numerical study of the effect of operating parameters on drop formation in a squeeze mode inkjet device
|
Wu, Hsuan-Chung; Lin, Huey-Jiuan; Hwang, Weng-Sing |
| 國立成功大學 |
2005 |
Special issue - MCSP6-2004
|
Hwang, Weng-Sing |
| 國立成功大學 |
2004-12-22 |
Thermal stability and bonding configuration of fluorine-modified low-k SiOC : H composite films
|
JangJian, Shiu-Ko; Liu, Chuan-Pu; Wang, Ying-Lang; Hwang, Weng-Sing; Tseng, Wei-Tsu |
| 國立成功大學 |
2004-12 |
Characterization of SnO2/TiO2 double-layer films as alcohol sensing materials
|
Yeh, Meng-Heng; Hwang, Weng-Sing; Lee, Gwo-Bin; Lu, Yang-Ming |
| 國立成功大學 |
2004-06 |
Forging condition for removing porosities in the hybrid casting and forging process of 7075 aluminum alloy casting
|
Chang, Fung-Chi; Hwang, Weng-Sing; Lee, Chung-Ham; Wu, Chun-Fu; Yang, Jin-Bin |
| 國立成功大學 |
2004-06 |
Pasty ranges and latent heat release modes for Sn-9Zn-xAg lead-free solder alloys
|
Tsai, Ying-Ling; Hwang, Weng-Sing |
| 國立成功大學 |
2004-05 |
Study of micro-droplet behavior for a piezoelectric inkjet printing device using a single pulse voltage pattern
|
Wu, Hsuan-Chung; Shan, Tzu-Ray; Hwang, Weng-Sing; Lin, Huey-Jiuan |
| 國立成功大學 |
2004-03 |
Simulation of droplet ejection for a piezoelectric inkjet printing device
|
Wu, Hsuan-Chung; Lin, Huey-Jiuan; Kuo, Yung-Chi; Hwang, Weng-Sing |
| 國立成功大學 |
2004-01-30 |
Fluorine-modified low-k a-SiOC : H composite films prepared by plasma enhanced chemical vapor deposition
|
JangJean, Shiuh-Ko; Liu, Chuan-Pu; Wang, Ying-Lang; Hwang, Weng-Sing; Tseng, Wei-Tsu; Chen, Sheng-Wen; Lo, Kuang-Yao |
| 國立成功大學 |
2003-10 |
Mold filling analysis in lost foam casting process for aluminum alloys and its experimental validation
|
Kuo, Jer-Haur; Chen, Jui-Ching; Pan, Yung-Ning; Hwang, Weng-Sing |
| 國立成功大學 |
2003-10 |
Studies by mathematical and physical modelling of fluid flow and inclusion removal phenomena in slab tundish for casting stainless steel using various flow control device designs
|
Fan, C. M.; Shie, R. J.; Hwang, Weng-Sing |
| 國立成功大學 |
2003-08 |
Study of solid mushroom formation in direct iron ore smelting reduction process using low temperature water model
|
Hwang, Y. P.; Fan, C. M.; Chen, Y. L.; Hwang, Weng-Sing; Chen, I. G.; Liu, S. H. |
| 國立成功大學 |
2003-07 |
Mathematical modeling for the solidification heat-transfer phenomena during the reflow process of lead-tin alloy solder joint in electronics packaging
|
Chiu, Yu-Fang; Tsai, Ying-Ling; Hwang, Weng-Sing |
| 國立成功大學 |
2003-06-30 |
In situ fluorine-modified organosilicate glass prepared by plasma enhanced chemical vapor deposition
|
JangJean, Shiuh-Ko; Wang, Ying-Lang; Liu, Chuan-Pu; Hwang, Weng-Sing; Tseng, Wei-Tsu; Liu, Chi-Wen |
