| 國立成功大學 |
2003-06 |
Effects of process conditions on mixing between molten iron and slag in smelting reduction vessel via water model study
|
Chou, J. M.; Chuang, M. C.; Yeh, M. H.; Hwang, Weng-Sing; Liu, S. H.; Tsai, S. T.; Wang, H. S. |
| 國立成功大學 |
2003-05-25 |
Development of a three-dimensional simulation system for micro-inkjet and its experimental verification
|
Wu, Hsuan-Chung; Hwang, Weng-Sing; Lin, Huey-Jiuan |
| 國立成功大學 |
2003 |
Numerical simulation of inclusion removal in a billet continuous casting mold based on the partial-cell technique
|
Ho, Yeong-Ho; Hwang, Weng-Sing |
| 國立成功大學 |
2002-12-02 |
Properties of nickel oxide thin films deposited by RF reactive magnetron sputtering
|
Lu, Yang-Ming; Hwang, Weng-Sing; Yang, J. S.; Chuang, H. C. |
| 國立成功大學 |
2002-12 |
Study of optimal Ca-Si injection position in gas stirred ladle based on water model experiment and flow simulation
|
Fan, Chih-Ming; Hwang, Weng-Sing |
| 國立成功大學 |
2002-10 |
Design of single element flow control device in twin strand billet tundish for continuous casting of steel using flow simulation model
|
Fan, Chih-Ming; Pan, S. M.; Wang, H. S.; Hwang, Weng-Sing |
| 國立成功大學 |
2002-06-17 |
Effects of substrate temperature on the resistivity of non-stoichiometric sputtered NiOx films
|
Lu, YM; Hwang, Weng-Sing; Yang, J. S. |
| 國立成功大學 |
2002 |
Measurement of interfacial heat transfer coefficient for the evaporative pattern casting of A356 aluminium alloy
|
Chen, J. C.; Kuo, J. H.; Hwang, Weng-Sing |
| 國立成功大學 |
2002 |
Measurements of thermal expansion coefficients and melting ranges for Sn-9Zn-xAg lead-free solder alloys
|
Tsai, Y. L.; Hwang, Weng-Sing; Wang, H. S.; Wu, M. H. |
| 國立成功大學 |
2002 |
Computer simulation for the investment casting of rene 77 alloy and its experimental verification
|
Ho, K. S.; Hwang, Weng-Sing |
| 國立成功大學 |
2002 |
The application of two phase flow simulation to the development of direct iron ore smelting reduction process
|
Wu, X. Z.; Hwang, Weng-Sing; Chen, C. W.; Liu, S. H. |
| 國立成功大學 |
2001-11-01 |
Effect of RF power on optical and electrical properties of ZnO thin film by magnetron sputtering
|
Lu, Yang-Ming; Hwang, Weng-Sing; Liu, W. Y.; Yang, J. S. |
| 國立成功大學 |
2001-11-01 |
Electrical properties of TaxNy films by implementing OES in the sputtering system
|
Lu, Yang-Ming; Weng, R. J.; Hwang, Weng-Sing; Yang, Y. S. |
| 國立成功大學 |
2001 |
Three-dimensional analysis of molten steel flow in slab continuous casting mould with rotated ports in submerged entry nozzle
|
Ho, Y. H.; Chen, C. H.; Hwang, Weng-Sing |
| 國立成功大學 |
2000-07 |
Development of an interactive simulation system for die cavity filling and its application to the operation of a low-pressure casting process
|
Kuo, J. H.; Hwang, Weng-Sing |
| 國立成功大學 |
2000 |
Mathematical modeling of fluid flow phenomena during tundish filling and subsequent initial casting operation in steel continuous casting process
|
Fan, Chih-Ming; Hwang, Weng-Sing |
| 國立成功大學 |
1999-04 |
Simulation of large bubble molten steel interaction for gas-injected ladle
|
Pan, S. M.; Chiang, J. D.; Hwang, Weng-Sing |
| 國立成功大學 |
1998-08 |
Comparison of phosphor bronze metal sheet produced by twin roll casting and horizontal continuous casting
|
Hwang, J. D.; Li, B. J.; Hwang, Weng-Sing; Hu, C. T. |
| 國立成功大學 |
1998-06 |
The preparation of TiAl-based intermetallics from elemental powders through a two-step pressureless sintering process
|
Yang, J. B.; Hwang, Weng-Sing |
