| 臺大學術典藏 |
2022-09-21T23:30:13Z |
Ultraviolet Laser Sintering of Printed Nickel Oxide Nanoparticles for Thin-Film Thermistor via Aerosol Jet Printing Technology
|
Chang, Yi Tse; Hung, Kuan Yi; Chien, Chih Hsuan; HONG-TSU YOUNG; Hsiao, Wen Tse; KUAN-MING LI |
| 臺大學術典藏 |
2022-09-21T23:30:13Z |
Analysis of Tool Wear by Using a Cutting Bending Moment Model for Milling Processes
|
Tseng, Hsiang Chun; MENG-SHIUN TSAI; Yeh, Bu Ci; KUAN-MING LI |
| 臺大學術典藏 |
2022-09-21T23:30:12Z |
Applied IrO2 Buffer Layer as a Great Promoter on Ti-Doping V2O5 Electrode to Enhance Electrochromic Device Properties
|
Ko, Tien Fu; Chen, Po Wen; KUAN-MING LI; HONG-TSU YOUNG |
| 臺大學術典藏 |
2022-09-21T23:30:12Z |
Laser surface modification on rGO/ZnO composite materials for NO2 gas sensing
|
Lin, Che Shu; Hsieh, Hsin Fang; Ding, Chien Fang; KUAN-MING LI; HONG-TSU YOUNG; Hsiao, Wen Tse |
| 臺大學術典藏 |
2022-05-21T23:35:57Z |
Picosecond dual-pulse laser ablation of fused silica
|
Wu, Ping Han; HONG-TSU YOUNG; KUAN-MING LI |
| 臺大學術典藏 |
2022-05-21T23:35:57Z |
Active Assistive Design and Multiaxis Self-Tuning Control of a Novel Lower Limb Rehabilitation Exoskeleton
|
Pan, Cheng Tang; Lee, Ming Chan; Huang, Jhih Syuan; Chang, Chun Chieh; Hoe, Zheng Yu; KUAN-MING LI |
| 臺大學術典藏 |
2022-03-22T15:04:47Z |
Online cutting temperature prediction using ink-jet printed sensors and model order reduction method
|
KUAN-MING LI; Chang, Chi Wen; CHIA-HAO CHANG |
| 臺大學術典藏 |
2022-03-22T08:28:43Z |
Developing the smart sorting screw system based on deep learning approaches
|
Lin W.-J;Chen J.-W;Young H.-T;Hung C.-L;Li K.-M.; Lin W.-J; Chen J.-W; Young H.-T; Hung C.-L; Li K.-M.; KUAN-MING LI |
| 臺大學術典藏 |
2022-03-22T08:28:43Z |
Aerosol jet printing of nickel oxide nanoparticle ink with ultraviolet radiation curing for thin-film temperature sensors
|
Chang Y.-T;Hung K.-Y;Young H.-T;Li K.-M;Chen R.K.; Chang Y.-T; Hung K.-Y; Young H.-T; Li K.-M; Chen R.K.; KUAN-MING LI |
| 臺大學術典藏 |
2022-03-22T08:28:43Z |
Aerosol jet printing of nickel oxide nanoparticle ink with ultraviolet radiation curing for thin-film temperature sensors
|
Chang Y.-T;Hung K.-Y;Young H.-T;Li K.-M;Chen R.K.; Chang Y.-T; Hung K.-Y; Young H.-T; Li K.-M; Chen R.K.; KUAN-MING LI |
| 臺大學術典藏 |
2022-03-22T08:28:43Z |
Developing the smart sorting screw system based on deep learning approaches
|
Lin W.-J;Chen J.-W;Young H.-T;Hung C.-L;Li K.-M.; Lin W.-J; Chen J.-W; Young H.-T; Hung C.-L; Li K.-M.; KUAN-MING LI |
| 臺大學術典藏 |
2022-03-22T08:28:42Z |
Publisher Correction: Integrating object detection and image segmentation for detecting the tool wear area on stitched image (Scientific Reports, (2021), 11, 1, (19938), 10.1038/s41598-021-97610-y)
|
Lin W.-J;Chen J.-W;Jhuang J.-P;Tsai M.-S;Hung C.-L;Li K.-M;Young H.-T.; Lin W.-J; Chen J.-W; Jhuang J.-P; Tsai M.-S; Hung C.-L; Li K.-M; Young H.-T.; KUAN-MING LI |
| 臺大學術典藏 |
2022-03-22T08:28:42Z |
Publisher Correction: Integrating object detection and image segmentation for detecting the tool wear area on stitched image (Scientific Reports, (2021), 11, 1, (19938), 10.1038/s41598-021-97610-y)
|
Lin W.-J;Chen J.-W;Jhuang J.-P;Tsai M.-S;Hung C.-L;Li K.-M;Young H.-T.; Lin W.-J; Chen J.-W; Jhuang J.-P; Tsai M.-S; Hung C.-L; Li K.-M; Young H.-T.; KUAN-MING LI |
| 臺大學術典藏 |
2022-03-22T08:28:42Z |
Integrating object detection and image segmentation for detecting the tool wear area on stitched image
|
Lin W.-J;Chen J.-W;Jhuang J.-P;Tsai M.-S;Hung C.-L;Li K.-M.; Lin W.-J; Chen J.-W; Jhuang J.-P; Tsai M.-S; Hung C.-L; Li K.-M.; KUAN-MING LI |
| 臺大學術典藏 |
2022-03-22T08:28:42Z |
Integrating object detection and image segmentation for detecting the tool wear area on stitched image
|
Lin W.-J;Chen J.-W;Jhuang J.-P;Tsai M.-S;Hung C.-L;Li K.-M.; Lin W.-J; Chen J.-W; Jhuang J.-P; Tsai M.-S; Hung C.-L; Li K.-M.; KUAN-MING LI |
| 臺大學術典藏 |
2022-03-22T08:25:56Z |
Integrating object detection and image segmentation for detecting the tool wear area on stitched image
|
Lin W.-J;Chen J.-W;Jhuang J.-P;Tsai M.-S;Hung C.-L;Li K.-M.; Lin W.-J; Chen J.-W; Jhuang J.-P; Tsai M.-S; Hung C.-L; Li K.-M.; KUAN-MING LI |
| 臺大學術典藏 |
2022-03-22T08:25:56Z |
Developing the smart sorting screw system based on deep learning approaches
|
Lin W.-J;Chen J.-W;Young H.-T;Hung C.-L;Li K.-M.; Lin W.-J; Chen J.-W; Young H.-T; Hung C.-L; Li K.-M.; KUAN-MING LI |
| 臺大學術典藏 |
2022-03-22T08:25:56Z |
Aerosol jet printing of nickel oxide nanoparticle ink with ultraviolet radiation curing for thin-film temperature sensors
|
Chang Y.-T;Hung K.-Y;Young H.-T;Li K.-M;Chen R.K.; Chang Y.-T; Hung K.-Y; Young H.-T; Li K.-M; Chen R.K.; KUAN-MING LI |
| 臺大學術典藏 |
2022-03-22T08:25:55Z |
Publisher Correction: Integrating object detection and image segmentation for detecting the tool wear area on stitched image (Scientific Reports, (2021), 11, 1, (19938), 10.1038/s41598-021-97610-y)
|
Lin W.-J;Chen J.-W;Jhuang J.-P;Tsai M.-S;Hung C.-L;Li K.-M;Young H.-T.; Lin W.-J; Chen J.-W; Jhuang J.-P; Tsai M.-S; Hung C.-L; Li K.-M; Young H.-T.; KUAN-MING LI |
| 臺大學術典藏 |
2021-11-22T09:11:39Z |
Enhancement of through silicon via (TSV) sidewall quality by nanosecond laser pulses with chemical etching process
|
Chao-Wei Tang; Hong-Tsu Young; Kuan-Ming Li; Shih-Chieh Tseng; HONG-TSU YOUNG |
| 臺大學術典藏 |
2021-11-22T09:11:38Z |
Innovative through-silicon-via formation approach for wafer-level packaging applications
|
Chao-Wei Tang; Hong-Tsu Young; Kuan-Ming Li; HONG-TSU YOUNG |
| 臺大學術典藏 |
2021-11-22T09:11:38Z |
Improving the sidewall quality of nanosecond laser-drilled deep through-silicon vias by incorporating a wet chemical etching process
|
Chao-Wei Tang; Kuan-Ming Li; Hong-Tsu Young; HONG-TSU YOUNG |
| 臺大學術典藏 |
2021-11-21T23:18:47Z |
Developing the smart sorting screw system based on deep learning approaches
|
Lin, Wan Ju; Chen, Jian Wen; HONG-TSU YOUNG; Hung, Che Lun; KUAN-MING LI |
| 臺大學術典藏 |
2021-11-21T23:18:47Z |
Publisher Correction: Integrating object detection and image segmentation for detecting the tool wear area on stitched image (Scientific Reports, (2021), 11, 1, (19938), 10.1038/s41598-021-97610-y)
|
Lin, Wan Ju; Chen, Jian Wen; Jhuang, Jian Ping; MENG-SHIUN TSAI; Hung, Che Lun; KUAN-MING LI; HONG-TSU YOUNG |
| 臺大學術典藏 |
2021-10-25T08:13:59Z |
Effect of Tool Wear on Tool Life and Surface Roughness in Ultrasonic Vibration-Assisted Micro-Milling
|
Kuan-Ming Li; Shang-Lan Wang; KUAN-MING LI |
| 臺大學術典藏 |
2021-10-25T08:13:58Z |
Predictive Models for Flank Wear in Turning under Flood Cooling Condition
|
Kuan-Ming Li; Steven Y. Liang; KUAN-MING LI |
| 臺大學術典藏 |
2021-10-25T08:13:58Z |
Modeling of Flank Wear in Near Dry Turning under Built-up Edge Effect
|
Kuan-Ming Li; KUAN-MING LI |
| 臺大學術典藏 |
2021-10-25T08:13:58Z |
Estimation of Transient Cutting Temperature by Remote Thermocouple Sensing Technique
|
Chia Wang; Wei-Ying Chu; Kuan-Ming Li; KUAN-MING LI |
| 臺大學術典藏 |
2021-10-25T08:13:58Z |
Tool Condition Monitoring with Current Signals for a Low-power Spindle
|
Chia Wang; Men Huang; Tien-Tung Chung; Hong-Tsu Young; Kuam-Ming Li; KUAN-MING LI |
| 臺大學術典藏 |
2021-10-21T23:27:22Z |
Integrating object detection and image segmentation for detecting the tool wear area on stitched image
|
Lin, Wan Ju; Chen, Jian Wen; Jhuang, Jian Ping; MENG-SHIUN TSAI; Hung, Che Lun; KUAN-MING LI |
| 臺大學術典藏 |
2021-10-21T23:27:22Z |
Aerosol jet printing of nickel oxide nanoparticle ink with ultraviolet radiation curing for thin-film temperature sensors
|
Chang, Yi Tse; Hung, Kuan Yi; HONG-TSU YOUNG; KUAN-MING LI; Chen, Roland K. |
| 臺大學術典藏 |
2021-08-05T02:37:27Z |
High-performance complementary electrochromic device based on iridium oxide as a counter electrode
|
Ko T.-F;Chen P.-W;Li K.-M;Young H.-T;Chang C.-T;Hsu S.-C.; Ko T.-F; Chen P.-W; Li K.-M; Young H.-T; Chang C.-T; Hsu S.-C.; KUAN-MING LI |
| 臺大學術典藏 |
2021-04-21T23:29:47Z |
High-performance complementary electrochromic device based on iridium oxide as a counter electrode
|
Ko, Tien Fu; Chen, Po Wen; KUAN-MING LI; HONG-TSU YOUNG; Chang, Chen Te; Hsu, Sheng Chuan |
| 臺大學術典藏 |
2021-03-29T06:10:06Z |
逆向工程應用於飛航事故調查之研究
|
陳子杰(Tsu-Chieh Chen);袁瑋辰(Wei-Chen Yuan);李貫銘(Kuan-Ming Li);莊禮彰(Li-Chang Chuang);王聖智(Sheng-Jhih Wang); 陳子杰(Tsu-Chieh Chen); 袁瑋辰(Wei-Chen Yuan); 李貫銘(Kuan-Ming Li); 莊禮彰(Li-Chang Chuang); 王聖智(Sheng-Jhih Wang); KUAN-MING LI |
| 臺大學術典藏 |
2020-01-13T08:21:21Z |
Experimental Study on Minimum Quantity Lubrication in Mechanical Micromachining
|
Li, K.-M.; KUAN-MING LI |
| 臺大學術典藏 |
2020-01-13T08:21:21Z |
Enhancement of through silicon via (TSV) sidewall quality by nanosecond laser pulses with chemical etching process
|
KUAN-MING LI; Li, K.-M.; Tang, C.-W.; Young, H.-T. |
| 臺大學術典藏 |
2020-01-13T08:21:21Z |
Design of an LTCC Tri-Band Transceiver Module for GPRS Mobile Applications
|
Lin, Y.-S.; Liu, C.-C.; Li, K.-M.; Chen, C.H.; KUAN-MING LI |
| 臺大學術典藏 |
2019-11-25T07:28:04Z |
Tool condition monitoring with current signals for a low-power spindle
|
KUAN-MING LI;Li K.M.;Young H.T.;Chung T.T.;Huang M.;Wang C.; Wang C.; Huang M.; Chung T.T.; Young H.T.; Li K.M.; KUAN-MING LI |
| 臺大學術典藏 |
2019-11-25T07:28:03Z |
On the Thermal Memory Effect Reduction of Power Amplifiers Using Pulse Modulation
|
KUAN-MING LI;Staudinger J.;Chen J.-H.;Li K.-M.;Chang C.-W.;Chen Y.-H.;Wang T.-H.; Wang T.-H.; Chen Y.-H.; Chang C.-W.; Li K.-M.; Chen J.-H.; Staudinger J.; KUAN-MING LI |
| 臺大學術典藏 |
2018-09-10T15:20:42Z |
Parameter optimization of micromilling brass mold inserts for microchannels with Taguchi method
|
Chen, P.-C.; Chen, Y.-C.; Pan, C.-W.; Li, K.-M.; KUAN-MING LI |
| 臺大學術典藏 |
2018-09-10T14:55:27Z |
Optimization of micromilling microchannels on a polycarbonate substrate
|
Lee, W.-C.; Li, K.-M.; KUAN-MING LI; Pan, C.-W.; Chen, P.-C. |
| 臺大學術典藏 |
2018-09-10T14:55:27Z |
Effect of tool wear in ultrasonic vibration-assisted micro-milling
|
Li, K.-M.; Wang, S.-L.; KUAN-MING LI |
| 臺大學術典藏 |
2018-09-10T14:55:27Z |
An experimental study of micromilling parameters to manufacture microchannels on a PMMA substrate
|
KUAN-MING LI;Li, K.-M.;Lee, W.-C.;Pan, C.-W.;Chen, P.-C.;KUAN-MING LI; Chen, P.-C.; Pan, C.-W.; Lee, W.-C.; Li, K.-M.; KUAN-MING LI |
| 臺大學術典藏 |
2018-09-10T09:45:33Z |
An improved remote sensing technique for estimating tool-chip interface temperatures in turning
|
KUAN-MING LI;Chu, W.-Y.;Wang, C.;Li, K.-M.;KUAN-MING LI; Li, K.-M.; Wang, C.; Chu, W.-Y.; KUAN-MING LI |
| 臺大學術典藏 |
2018-09-10T09:45:20Z |
Improving the dielectric breakdown field of silicon light-emitting-diode sub-mount by a hybrid nanosecond laser drilling strategy
|
Tang, C.-W.; Li, K.-M.; Yang, M.; Liao, H.-C.; Young, H.-T.; HONG-TSU YOUNG; KUAN-MING LI |
| 臺大學術典藏 |
2018-09-10T09:19:21Z |
Study on minimum quantity lubrication in micro-grinding
|
KUAN-MING LI;Lin, C.-P.;Li, K.-M.;KUAN-MING LI; Li, K.-M.; Lin, C.-P.; KUAN-MING LI |
| 臺大學術典藏 |
2018-09-10T09:19:21Z |
Flank wear model for near dry turning under built-up edge effect
|
Li, K.-M.; Liang, S.Y.; KUAN-MING LI |
| 臺大學術典藏 |
2018-09-10T09:19:21Z |
Experimental study on vibration-assisted grinding
|
Li, K.-M.; Hu, Y.-M.; Yang, Z.-Y.; Chen, M.-Y.; KUAN-MING LI |
| 臺大學術典藏 |
2018-09-10T09:19:21Z |
Experimental Study on Minimum Quantity Lubrication in Mechanical Micromachining
|
Li, K.-M.; KUAN-MING LI |
| 臺大學術典藏 |
2018-09-10T09:19:04Z |
Innovative through-silicon-via formation approach for wafer-level packaging applications
|
Li, Kuan Ming; KUAN-MING LI; Young, Hong Tsu; Tang, Chao Wei; HONG-TSU YOUNG; Li, Kuan Ming; Young, Hong Tsu; Tang, Chao Wei; Tang, C.W.; Young, H.T.; Li, K.M. |
