| 臺大學術典藏 |
2020-01-17T07:47:10Z |
The high response and high efficiency velocity control of a hydraulic injection molding machine using a variable rotational speed electro-hydraulic pump-controlled system
|
MAO-HSIUNG CHIANG;Kuo, C.-F.J.;Chen, C.-C.;Chiang, M.-H.; Chiang, M.-H.; Chen, C.-C.; Kuo, C.-F.J.; MAO-HSIUNG CHIANG |
| 國立臺灣科技大學 |
2020 |
Automatic lung nodule detection system using image processing techniques in computed tomography
|
Kuo, C.-F.J.;Huang, C.-C.;Siao, J.-J.;Hsieh, C.-W.;Huy, V.Q.;Ko, Ko K.-H.;Hsu, Hsu H.-H. |
| 國立臺灣科技大學 |
2020 |
Application of intelligent automatic segmentation and 3D reconstruction of inferior turbinate and maxillary sinus from computed tomography and analyze the relationship between volume and nasal lesion
|
Kuo, C.-F.J.;Leu, Y.-S.;Hu, D.-J.;Huang, C.-C.;Siao, J.-J.;Leon, K.B.P. |
| 國立臺灣科技大學 |
2020 |
Laryngopharyngeal reflux image quantization and analysis of its severity
|
Kuo, C.-F.J.;Kao, C.-H.;Dlamini, S.;Liu, S.-C. |
| 國立臺灣科技大學 |
2020 |
Highly efficient photocatalytic activity of Ag3VO4/WO2.72 nanocomposites for the degradation of organic dyes from the ultraviolet to near-infrared regions
|
Motora, K.G.;Wu, C.-M.;Chala, T.F.;Chou, M.-H.;Kuo, C.-F.J.;Koinkar, P. |
| 國立臺灣科技大學 |
2020 |
Preparation of boron nitride nanosheets using a chemical exfoliation method as a thermal conductive filler for the development of silicone thermal pads: Part II: Optimization of process parameter design on the development of a silicone thermal pad
|
Kuo, C.-F.J.;Chen, P.-Y.;Chen, J.-B. |
| 國立臺灣科技大學 |
2020 |
Process development of water-based polyurethane with acrylate terminal group under water vapor permeability and water repellency for nylon fabric
|
Kuo, C.-F.J.;Chen, J.-B.;Yang, C.-P.;Dong, M.-Y. |
| 國立臺灣科技大學 |
2019 |
Applying the support vector machine with optimal parameter design into an automatic inspection system for classifying micro-defects on surfaces of light-emitting diode chips
|
Kuo, C.-F.J.;Tung, C.-P.;Weng, Weng W.-H. |
| 國立臺灣科技大學 |
2019 |
Development of multifunctional warming fabric part II: Multi-quality process parameter optimization of hygroscopic heating and antistatic function yarn
|
Kuo, C.-F.J.;Lan, W.-L. |
| 國立臺灣科技大學 |
2019 |
Gaussian probability bi-histogram equalization for enhancement of the pathological features in medical images
|
Kuo, C.-F.J.;Wu, H.-C. |
| 國立臺灣科技大學 |
2019 |
A bifacial photovoltaic thermal system design with parameter optimization and performance beneficial validation
|
Kuo, C.-F.J.;Yang, P.-C.;Umar, M.L.;Lan, W.-L. |
| 國立臺灣科技大學 |
2019 |
Hot-melt pressure-sensitive adhesive for seamless bonding of nylon fabric part I: effect of a functional monomer
|
Kuo, C.-F.J.;Chen, J.-B.;Lin, P.-H.;Yen, H.-T. |
| 國立臺灣科技大學 |
2019 |
Research and development of a composite with transparent polypropene fiber Part I: a study of combining the Taguchi method with the analytic hierarchy process for masterbatch modification and toughening to enhance characteristics
|
Kuo, C.-F.J.;Huang, C.-C.;Ting, C.-H.;Dong, M.-Y.;Lan, W.L. |
| 國立臺灣科技大學 |
2019 |
A study of optimization parameters for the development of ultraviolet cured low-acid optically clear adhesive
|
Kuo, C.-F.J.;Yen, H.-T.;Lan, W.-L.;Dewangga, G.R.S.;Chen, J.-B.;Chang, S.-H. |
| 國立臺灣科技大學 |
2019 |
Automatic marking point positioning of printed circuit boards based on template matching technique
|
Kuo, C.-F.J.;Tsai, C.-H.;Wang, Wang W.-R.;Wu, H.-C. |
| 國立臺灣科技大學 |
2019 |
Automated optical inspection system for surface mount device light emitting diodes
|
Kuo, C.-F.J.;Fang, T.-Y.;Lee, C.-L.;Wu, H.-C. |
| 國立臺灣科技大學 |
2019 |
The photovoltaic-thermal system parameter optimization design and practical verification
|
Kuo, C.-F.J.;Liu, J.-M.;Umar, M.L.;Lan, W.-L.;Huang, C.-Y.;Syu, Syu S.-S. |
| 國立臺灣科技大學 |
2019 |
Development of a warming multi-functional fabric Part I: The analytic hierarchy process combined with the technique for order preference by similarity to an ideal solution for the optimization of the multi-quality melt spinning parameters in far-infrared functional yarn
|
Lan, W.-L.;Kuo, C.-F.J. |
| 國立臺灣科技大學 |
2019 |
Optimum processing parameters of sueding fabric comfort by applying the Taguchi method and fuzzy theory
|
Kuo, C.-F.J.;Lin, W.-T. |
| 國立臺灣科技大學 |
2019 |
Jerk decision for free-form surface effects in multi-axis synchronization manufacturing
|
Weng, Weng W.-H.;Kuo, C.-F.J. |
| 國立臺灣科技大學 |
2019 |
Synthesis of acrylic hot-melt adhesive based on poly(methyl methacrylate)-b-poly(2-ethylhexyl acrylate) copolymer using atom transfer radical polymerization for a nylon fabric bonding system
|
Kuo, C.-F.J.;Chen, J.-B.;Chen, P.-Y.;Dewangga, G.R.S. |
| 國立臺灣科技大學 |
2019 |
Preparation of boron nitride nanosheets using a chemical exfoliation method as a thermal conductive filler for the development of silicone thermal composites Part I: effect of single- and hybrid-filler additions on the silicone composite performance
|
Kuo, C.-F.J.;Chen, J.-B.;Chen, P.-Y.;Dong, M.-Y. |
| 國立臺灣科技大學 |
2019 |
Hot-melt pressure-sensitive adhesive for seamless bonding of nylon fabric Part II: Process parameter optimization for seamless bonding of nylon fabric
|
Kuo, C.-F.J.;Lan, W.L.;Wang, J.-W.;Chen, J.-B.;Lin, P.-H. |
| 國立臺灣科技大學 |
2018 |
Integrating image processing and classification technology into automated polarizing film defect inspection
|
Kuo C.-F.J.; Lai C.-Y.; Kao C.-H.; Chiu C.-H. |
| 國立臺灣科技大學 |
2018 |
Low corrosion optically clear adhesives for conducting glass: I. Effects of N,N-diethylacrylamide and acrylic acid mixtures on optically clear adhesives
|
Kuo C.-F.J.; Chen J.-B.; Chang S.-H. |
| 國立臺灣科技大學 |
2018 |
Development of disperse dye polypropylene fiber and process parameter optimization Part I: Development of dyeable polypropylene fiber and parameter optimization
|
Kuo C.-F.J.; Lan W.-L.; Chen S.-H.; Lin F.-S.; Dong M.-Y. |
| 國立臺灣科技大學 |
2018 |
Development of disperse dyes polypropylene fiber and process parameter optimization Part II: Dyeable polypropylene fiber production and melt spinning process parameter optimization
|
Kuo C.-F.J.; Lan W.-L.; Dong M.-Y.; Chen S.-H.; Lin F.-S. |
| 國立臺灣科技大學 |
2018 |
Synthesis of high-solid-content, acrylic pressure-sensitive adhesives by solvent polymerization
|
Kuo C.-F.J.; Chen J.-B. |
| 國立臺灣科技大學 |
2018 |
Fabrication of a thermally conductive silicone composite by incorporating surface-modified boron nitride
|
Kuo, C.-F.J.;Dewangga, G.R.S.;Chen, J.-B. |
| 國立臺灣科技大學 |
2018 |
Research and development of a composite with transparent polypropylene fiber part II: multi-quality optimization parameter design for high impact resistance of polypropylene/enhanced by rubber segment-styrene ethylene/butylene styrene composites
|
Kuo, C.-F.J.;Huang, C.-C.;Dong, M.-Y.;Ting, C.-H.;Lan, W.-L. |
| 國立臺灣科技大學 |
2017 |
Dual-Confined Sulfur in Hybrid Nanostructured Materials for Enhancement of Lithium-Sulfur Battery Cathode Capacity Retention
|
Zegeye, T.A;Kuo, C.-F.J;Chen, H.-M;Tripathi, A.M;Lin, M.-H;Cheng, J.-H;Duma, A.D;Su, W.-N;Hwang, B.-J. |
| 國立臺灣科技大學 |
2017 |
Evaluation of intelligent green building policies in Taiwan – Using fuzzy analytic hierarchical process and fuzzy transformation matrix
|
Kuo, C.-F.J;Lin, C.-H;Hsu, M.-W;Li, M.-H. |
| 國立臺灣科技大學 |
2017 |
A study of multi-quality processing parameter optimization for sueded fabric
|
Kuo, C.-F.J;Lin, W.-T. |
| 國立臺灣科技大學 |
2017 |
Optimization and practical verification of system configuration parameter design for a photovoltaic thermal system combined with a reflector
|
Kuo, C.-F.J;Syu, Syu S.-S;Shih, C.-Y;Lan, W.-L;Huang, C.-Y. |
| 國立臺灣科技大學 |
2017 |
Dynamic modeling and entity validation of a photovoltaic system
|
Lee, Y.-W;Kuo, C.-F.J;Weng, Weng W.-H;Huang, C.-Y;Peng, C.-Y. |
| 國立臺灣科技大學 |
2017 |
Controllable embedding of sulfur in high surface area nitrogen doped three dimensional reduced graphene oxide by solution drop impregnation method for high performance lithium-sulfur batteries
|
Zegeye, T.A;Tsai, M.-C;Cheng, J.-H;Lin, M.-H;Chen, H.-M;Rick, J;Su, W.-N;Kuo, C.-F.J;Hwang, B.-J. |
| 國立臺灣科技大學 |
2017 |
Automatic and quantitative measurement of laryngeal video stroboscopic images
|
Kuo, C.-F.J;Kuo, J;Hsiao, S.-W;Lee, C.-L;Lee, J.-C;Ke, B.-H. |
| 國立臺灣科技大學 |
2017 |
Application of robust color composite fringe in flip-chip solder bump 3-D measurement
|
Kuo, C.-F.J;Wu, H.-C. |
| 國立臺灣科技大學 |
2017 |
Prognostic value of tumor volume for patients with advanced lung cancer treated with chemotherapy
|
Kuo, C.-F.J;Ke, B.-H;Wu, N.-Y;Kuo, J;Hsu, Hsu H.-H. |
| 國立臺灣科技大學 |
2017 |
Image database of printed fabric with repeating dot patterns part (I) – image archiving
|
Kuo, C.-F.J.;Lee, C.-L.;Shih, C.-Y. |
| 國立臺灣科技大學 |
2016 |
Three-dimensional reconstruction of trachea using computed tomography imaging as therapy for tracheal stenosis in infants
|
Kuo, C.-F.J;Leu, Y.-S;Kuo, R;Su, C.-H;Yuan, T.-C;Ke, B.-H;Wu, N.-Y. |
| 國立臺灣科技大學 |
2016 |
The preparation of organic light-emitting diode encapsulation barrier layer by low-temperature plasma-enhanced chemical vapor deposition: a study on the SiO x N y film parameter optimization
|
Kuo, C.-F.J;Lan, W.-L;Chang, Y.-C;Lin, K.-W. |
| 國立臺灣科技大學 |
2016 |
Analysis of intelligent green building policy and developing status in Taiwan
|
Kuo, C.-F.J;Lin, C.-H;Hsu, M.-W. |
| 國立臺灣科技大學 |
2016 |
Nano composite fiber process optimization for polypropylene with antibacterial and far-infrared ray emission properties
|
Kuo, C.-F.J;Fan, C.-C;Su, T.-L;Chen, S.-H;Lan, W.L. |
| 國立臺灣科技大學 |
2016 |
Inspection of appearance defects for polarizing films by image processing and neural networks
|
Huang, C.-C;Kuo, C.-F.J;Chen, Chen C.-T;Liao, C.-C;Tang, Tang T.-T;Su, T.-L. |
| 國立臺灣科技大學 |
2016 |
A novel image processing technology for recognizing the weave of fabrics
|
Kuo, C.-F.J;Shih, C.-Y;Huang, C.-C;su, T.-L;Liao, I.-C. |
| 國立臺灣科技大學 |
2016 |
Applying the support vector machine with optimal parameter design into an automatic inspection system for classifying micro-defects on surfaces of light-emitting diode chips
|
Kuo, C.-F.J;Tung, C.-P;Weng, Weng W.-H. |
| 國立臺灣科技大學 |
2016 |
Automated optical inspection system for surface mount device light emitting diodes
|
Kuo, C.-F.J;Fang, T.-Y;Lee, C.-L;Wu, H.-C. |
| 國立臺灣科技大學 |
2016 |
Automatic marking point positioning of printed circuit boards based on template matching technique
|
Kuo, C.-F.J;Tsai, C.-H;Wang, Wang W.-R;Wu, H.-C. |
| 國立臺灣科技大學 |
2015 |
Optimization of injection-molded light guide plate with microstructures by using reciprocal comparisons
|
Kuo, C.-F.J.;Dewantoro, G.;Huang, C.-C. |
